Attachment_6_RFQ__Rev_8.4.18.pdf

Attachment 6 – RFQ# FA4418-18-Q-0049 Page 1 of 6

REQUEST FOR QUOTATION

8/3/18

The 628th Contracting Squadron is soliciting quotations on the item(s) listed below. The associated NAICS code is 337215 with a 500 employee size standard. This RFQ is set aside (100%) for small business only. Please complete this form and submit your offer to the following address no later than:

16:00PM Eastern Standard Time on 23 August 2018.

628th Contracting Squadron Attn.: Victor McKinnon 101 E. Hill Blvd, Bldg. 503 Tel. No: (843) 963-4492 JB Charleston SC 29404-5021 Fax: (843) 963-5183 E-mail: victor.mckinnon@us.af.mil

CLIN 0001 Bldg 466 & 473

ITEM# SUPPLIES/SERVICES QTY U/I Unit Price Extended Amount

Captain’s Bed with three drawers: Plywood headboard assembly to be 1 ½” thick and bolts to bed frame. Headboard to have a 1” solid wood gray three sided inlay stained to match drawer fronts.

The three sided inlay should be 2.5” from edges on sides and top. Footboard assembly to be 1 ¼” thick. Internal case to be double dowel construction reinforced with glue and screws at each junction. All internal rails are solid hardwood. Dimension: 55W x 81D x 44H The bed shall fit Full Size XL 54x80” mattresses.

Color: Gray (or equal color)

142 EA

Dresser: Solid hardwood end panel construction.

Internal case to be double dowel construction reinforced with glue and screws at each junction.

All internal rails are solid hardwood. Tops to be 1 ½” thick high pressure laminate with external 3mm PVC edge banding. Back panel to be 1 ½” thick.

Dimension: 50W x 24D x 30H Color: Grey (or equal color)

Desk: Solid hardwood end panel construction.

Internal case to be double dowel construction reinforced with glue and screws at each junction.

All internal rails are solid hardwood. Tops to be 1 ½” thick high pressure laminate with external 3mm PVC edge banding. Back panel to be 1 ½” thick Dimension: 50Wx24Dx30H

Attachment 6 – RFQ# FA4418-18-Q-0049 Page 2 of 6

Recliner Frame is machined from kiln-dried hardwoods and/or pine not to exceed moisture content of 7%.

Frame is assembled using mortise-and-tenon joinery and fastened with glue and heavy duty frame staples. 8-guage steel springs are attached to the frame with metal clips. 12-guage border wire connects the springs to each other. 6” tall square tapered legs are fastened to the frame using 5/8” hanger bolts into steel T-nuts Push on the arm recliner mechanism – 14” clearance from the wall.

Task Chair:

Supportive Poly Mesh Back, Upholstered seat, Height adjustable arms, Synchronized mechanism, Tilt tension and tilt lock, Lifetime Warranty on components, Domestic components, 3-1/2” High density foam seat, and Contoured seat shape for comfort, Meets ANSI/BIFMA standards, Meets NFPA requirements, and Meets TAA requirements.

Color: Grey (or equal color)

Table Lamp:

The lamp will need to be 28”H have a 6’ SPT-2 power supply cord with a polarized plug. The base of the lamp will have an on/off switch, usb and 110v outlet. The shade will be cream in color with a bell shape.

Color: Grey (or equal color)

0007 Removal /disposal old furnishings 1 Lot

0008 Installation

0008 SHIPPING (FOB Destination) 1 Lot

TOTAL COST Total

CLIN 0002: Bldg. 2404

ITEM# SUPPLIES/SERVICES QTY U/I Unit Price Extended Amount

Bunk-able panel base beds: Includes both top*and bottom panels, Steel construction, steel deck with two high pressure laminate wood drawers, with padlock hasp and locking steel mechanism and bed shelf. Color: Navy Blue Drawers will be centered. Dimension: 38"W x 86"L x 34-36"H The bed shall fit existing mattress size of 36"W x 80"L x 8"H. Color: Navy Blue frame with

300 EA

Attachment 6 – RFQ# FA4418-18-Q-0049 Page 3 of 6

Maple Finish drawers. *Top panel will be equipped with a standard texture navy blue painted safety rail that mounts to top bunk panel Dimension: 27"W x 13.5"H (or equal color)

TV Stand w/three drawers: Steel construction, high pressure laminate wood Top Steel five-sided drawers with double pan drawer fronts and full-width steel integral drawer pulls. Heavy duty ball-bearing drawer slides with integrated out stops, 100

lb. capacity, Grommet hole for wire management, adjustable nylon leveling glides, padlock hasp and locking steel mechanism, and high pressure laminate wood drawer fronts.

Dimension: 30”W x 22”D x 38.8”H Color: Navy Blue with Maple Finish drawers.

(or equal color)

600 EA

Activity Table: High Pressure Laminate Top, Steel Black Cross Base, adjustable nylon leveling glides, and rubber T-molding edge.

Dimension: Top 24” Round, 30” Height Top Finish: Natural Oak (or equal color)

300 EA

Bistro Style Chair: Stationary, Black Steel Frame, Wood Seat, Metal back-vertical slats, Black powder coat finish, Natural Oak Seat Finish, and Nylon glide. The chair should fit properly under table and provide ample room to sit comfortably. (or equal color)

600 EA

0005 Removal /disposal old furnishings. 1 Lot

0006 Installation 1 Lot

0007 SHIPPING (FOB Destination) 1 Lot

TOTAL COST for Bldg. 2407 Total

CLIN 0003 Bldg. 464 (Award of this CLIN will be made based on the availability of funds – not currently funded)

ITEM# SUPPLIES/SERVICES QTY U/I Unit Price

Extended Amount

Attachment 6 – RFQ# FA4418-18-Q-0049 Page 4 of 6

Captain’s Bed with three drawers: Plywood headboard assembly to be 1 ½” thick and bolts to bed frame. Headboard to have a 1” solid wood gray three sided inlay stained to match drawer fronts. The three sided inlay should be 2.5” from edges on sides and top.

Footboard assembly to be 1 ¼” thick. Internal case to be double dowel construction reinforced with glue and screws at each junction. All internal rails are solid hardwood. Dimension: 55W x 81D x 44H The bed shall fit Full Size XL 54x80” mattresses.

Color: Gray (or equal color)

40 EA

Dresser: Solid hardwood end panel construction.

Internal case to be double dowel construction reinforced with glue and screws at each junction. All internal rails are solid hardwood. Tops to be 1 ½” thick high pressure laminate with external 3mm PVC edge banding. Back panel to be 1 ½” thick.

Dimension: 50W x 24D x 30H

Desk: Solid hardwood end panel construction. Internal case to be double dowel construction reinforced with glue and screws at each junction. All internal rails are solid hardwood. Tops to be 1 ½” thick high pressure laminate with external 3mm PVC edge banding. Back panel to be 1 ½” thick Dimension: 50Wx24Dx30H

Recliner:

FRAME:

Frame is machined from kiln-dried hardwoods and/or pine not to exceed moisture content of 7%. Frame is assembled using mortise-and-tenon joinery and fastened with glue and heavy duty frame staples. 8-guage steel springs are attached to the frame with metal clips. 12-guage border wire connects the springs to each other. 6” tall square tapered legs are fastened to the frame using 5/8” hanger bolts into steel T-nuts Push on the arm recliner mechanism – 14” clearance from the wall. Color: Grey (or equal color)

Task Chair:

Supportive Poly Mesh Back, Upholstered seat, Height adjustable arms, Synchronized mechanism, Tilt tension and tilt lock, Lifetime Warranty on components, Domestic components, 3-1/2” High density foam seat, Contoured seat shape for comfort, Meets ANSI/BIFMA standards, Meets NFPA requirements, Meets TAA requirements.

Attachment 6 – RFQ# FA4418-18-Q-0049 Page 5 of 6

Table Lamp:

The lamp will need to be 28”H have an 6’ SPT-2 power supply cord with a polarized plug. The base of the lamp will have an on/off switch, usb and 110v outlet.

The shade will be cream in color with a bell shape.

40 Lot

0007 Removal /disposal old furnishings 1 Lot

0008 Installation 1 Lot

0008 SHIPPING (FOB Destination) 1 Lot

TOTAL COST Total

Total price for evaluation proposes of determining award:

CLIN 0001 Total Price (Building 466 & 473)

CLIN 0002 Total Price (Building 2404)

(***See Note**) CLIN 0003 Total Price (Building 464) (No funds exist for this CLIN)

Total Price, CLINs 0001 & 0002 & 0003 for evaluation purposes.

**Note** Funds for CLIN 0003 currently does not exist. Award will be made if funds become available prior to 30 Sep 2018.** NOTE Or Equal item submissions: offerors must identify the or equal brand or color the offeror must submit specifications sufficient for evaluation. Vendors must submitt pricing for all CLINS.

Vendor Name: ____________________________________________

Address: _______________________________________________

Phone: ____________________ Fax: __________________

Quoted by: _________________ title:______________

Warranty: _ GSA Schedule: _

Cage Code: _______________________ Duns: ___________________

Tax ID: ______________________ Email: ___ _____________

Business Size: _____________________ Delivery: __ _____________

FOB: ___ _______________________ Discount Terms: __ _______

Attachment 6 – RFQ# FA4418-18-Q-0049 Page 6 of 6