RFQ___Industrial_Washer_and_Dryer___Final.pdf

Request for Quote: FA441726Q0022

From: 1 SOCONS/PKC

350 Tully St.

Hurlburt field, FL 32544

Contracting Officer: SSgt Kayton Clinkscales Email: kayton.clinkscales@us.af.mil Contracting Specialist: SSgt Jordan Castro Figueroa Email: jordan.castro_figueroa@us.af.mil

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice.

This announcement constitutes the only solicitation; quotations are being requested and written solicitation will not be issued. The solicitation number is FA441726Q0022 and is issued as a Request for Quotation.

See SAM.gov Posting Details for Question and/or Response Dates

**Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date for receipt of proposals. In the event the Government cancels this solicitation, the Government has no obligation to reimburse on offer or for any costs.**

This combined synopsis/solicitation incorporates provisions and clauses that are in effect through Federal Acquisition Circular (FAC) 2025-06. This requirement is a 100% Small Business Set Aside. This acquisition is restricted to brand Name or Equal Items This NAICS code is 333310. The Product Service Code (PSC) is 3510. The size standard is 1000 Employees.

Washer and Dryer (The quote shall be effective for 30 days after submission of quote)

Response Due Date: 12:00 PM CST, Friday, 06 March 2026

Please respond to this RFQ by submitting a response to the Primary Point of Contact no later than 12:00 PM Central, Friday, 06 March 2026 (sooner if possible) in order to be considered timely.

Please carefully review all special notes, instructions, clauses, and provisions contained herein to ensure compliance and eligibility for award. FAR 52.212-1, 52.212-2, 52.212-4 and 52.212-5 apply to this acquisition. Required fill-in information within FAR 52.212-3 should be returned with the quote in order for a response to this solicitation to be considered complete.

Please provide a quote for the line item listed below.

The contractor shall provide all labor, installation, equipment, materials, tools, parts, shipping, and all other items necessary to deliver the following items:

CLIN ITEM Quantity Unit Price Total Price

UniMac 60lb Cabinet Hardmount Washer

P/N: CT060QN0FXU80B000

(*or Equal Item*) See Salient Characteristics below 2 EA

UniMac 75lb Single Tumble Dryer

P/N: UT075NFN0NXG6W0000

(*or Equal Item*) 2 EA

All items must be fully assembled and ready for use upon delivery

FOB: Destination

Payment Terms: Net 30

Shipping Cost Included? Yes

Delivery Date: 60 Days after Award

Company Name: ___________________________________________

Company Address: ___________________________________________

Cage Code # _______________________

POC: _________________________ __ Telephone # ____________________________ _

E-Mail Address: _____________________________

Do you have capacity to invoice electronically through WAWF? (Yes/No) _______________________

Confirm all Amendments to this solicitation received: __________________________________________

Special Notes and Instructions:

1. Notice to Quoter(s)/Supplier(s): The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse a quoter for any costs.

2. Small Business Set-Aside: This is a notice that this order is a total set-aside for small business concerns.

Only quotes submitted by small business concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a small business concern will not be considered for award.

3. Mandatory Registrations. To be eligible for award, registration with the System for Award Management (SAM) must be current. To register or update former CCR and Reps & Certs that are not current go to https://www.sam.gov/SAM/ and provide mandatory information.

To be eligible for award, registration with the Procurement Integrated Enterprise Environment (PIEE) must be current. In addition, the contractor must go to https://piee.eb.mil/xhtml/unauth/help/helpvendors.xhtml and provide mandatory information.

4. Salient characteristics: Quotes must meet the below salient characteristics. Failure to meet the below characteristics renders the quote as unacceptable.

5. Delivery/Assembly: Delivery shall be FOB Destination and included in CLIN prices noted above. The item must be fully assembled and ready for use upon delivery. The Washer and Dryer will be delivered to 145 Letourneau Ave Hurlburt Field, FL 32544-5242 United Sates.

6. Period for Acceptance of Quotes. FAR 52.212-1(c) is tailored as follows: The quoter agrees to hold the prices in its quote firm for 30 calendar days from the date specified for receipt of quotes. NOTE: This period supersedes that indicated in FAR 52.212-1(c).

7. Discussions. The award will be based on initial responses, quoters are highly encouraged to quote their most advantageous pricing in their initial response. The government intends to award a purchase order without discussions with respective vendors/quoters. The government, however, reserves the right to conduct discussions if deemed in its best interests.

8. Basis for Award: 1 SOCONS/PKC plans to issue a single firm-fixed price order award to the responsive contractor offering the Lowest Price Technically Acceptable quote. The Government plans to award without discussion, therefore quotes should contain the best terms from a price and technical standpoint. The Government reserves the right to hold discussions if, during quote evaluation, it is determined to be in the best interest of the Government.

a. Responsive: The Government shall first review all quotes for responsiveness. To be considered Responsive, the contractor must submit, at a minimum:

i. Confirm that the required period of performance can be met.

ii. Submit sufficient technical data to include product literature to allow determination that the requirement is being met.

iii. Submit all requested information to include completion of the Price Schedule (above).

Washer Minimum:

1. 60 lbs.

2. 200-240V/50-60Hz/1-3Ph

3. Extractor /100G / Gravity

Dryer Minimum:

1. 75 lbs.

2. 200-240V/50-60Hz/1-3Ph

3. Natural Gas Heating

4. Dual Digital

1551398885A Underline

iv. Submit the completed fill in FAR/DFARS clauses and provisions as well as all other requested information to include completion and submission of the list of materials and pricing, if applicable.

Contractor quotes that fail to meet the above criteria for responsiveness may be considered “non-responsive” and shall not be evaluated further.

b. Order of Evaluation: The government shall organize all responsive contractor quotes in order from lowest to highest total price. Evaluation shall begin with the quote having the lowest total price.

c. Evaluation:

i. The two (2) lowest total priced quotes shall be evaluated for Technical Acceptability. Technical Acceptability is rated on a Pass/Fail basis against each of the Technical Factors stated below. To be considered “Technically Acceptable,” the contractor’s quote must demonstrate adherence to all the following Technical Factors:

Technical Factor: The contractor shall submit sufficient technical data to allow determination that the product being offered meets all of the Salient Characteristics listed. This should include (1) Manufacturer name and Part Number as well as any other information ( illustrations, product literature, cut sheets, machine specifications, etc.to sufficient to identify all of the Salient Characteristics listed above. If sufficient information is not submitted to illustrate meeting the Salient Characteristics, the quote may be deemed non-responsive and not evaluated further. (NOTE:

webpage references are not considered sufficient support; if the contractor is relying on a manufacturer’s webpage to support the technical requirement, that information must be downloaded and submitted with the quote).

ii After technical evaluation, contract quotes shall be given one of the following ratings:

Technically Acceptable – The quote clearly meets the minimum requirements of the solicitation to include meeting delivery date.

Technically Unacceptable – The quote does not clearly meet the minimum requirements of the solicitation to include delivery date.

If either of the two quotes with the lowest total price is found to be Technically Unacceptable, the quote with the next lowest total price will be evaluated for technical acceptability. This process will continue until two Technically Acceptable quotes are identified or until all quotes have been evaluated.

9. This Request for Quote and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2025-06, Effective: 01 October 2025. The following FAR /DFARS / DAFFARS provisions and clauses are hereby applicable to this solicitation and any resultant contract award:

(For full text references, go to www.acquisition.gov)

DOCUMENT NUMBER

FA441726Q0022

CLAUSES INCORPORATED BY REFERENCE

CLAUSE

NO

ALT NO/

DEV NO CLAUSE TITLE YEAR-

MO SECTION

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. 2011-09 SEC I

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I

252.203-7005 Representation Relating to Compensation of Former DoD Officials. 2022-09 SEC K

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. 2016-10 SEC K

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. 2024-05 SEC I

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. 2023-01 SEC I

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC L 252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I

252.225-7055 Representation Regarding Business Operations with the Maduro Regime. 2022-05 SEC K

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. 2023-01 SEC I

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation. 2023-06 SEC K

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. 2023-06 SEC I

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. 2018-12 SEC G

252.232-7010 Levies on Contract Payments. 2006-12 SEC I 252.247-7023 Transportation of Supplies by Sea. 2024-10 SEC I

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. 2017-01 SEC I

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. 2026-02 SEC I

52.204-13 System for Award Management-Maintenance. 2026-02 SEC I 52.204-7 System for Award Management-Registration. 2026-02 SEC L

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. 2026-02 SEC I

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. 2026-02 SEC L

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. 2026-02 SEC I

52.219-6 Notice of Total Small Business Set-Aside. 2026-02 SEC I 52.222-19 Child Labor-Cooperation with Authorities and Remedies. 2026-02 SEC I 52.222-36 Equal Opportunity for Workers with Disabilities. 2026-02 SEC I 52.222-41 Service Contract Labor Standards. 2026-02 SEC I 52.222-50 Combating Trafficking in Persons. 2026-02 SEC I

52.222-55 Minimum Wages for Contractor Workers Under Executive Order 14026. 2026-02 SEC I

52.222-62 Paid Sick Leave Under Executive Order 13706. 2026-02 SEC I 52.223-23 Sustainable Products. 2026-02 SEC I 52.223-5 Pollution Prevention and Right-to-Know Information. 2024-05 SEC I

Encouraging Contractor Policies to Ban Text Messaging While

52.226-8 Driving. 2024-05 SEC I

52.232-33 Payment by Electronic Funds Transfer-System for Award Management. 2018-10 SEC I

52.232-40 Providing Accelerated Payments to Small Business Subcontractors. 2023-03 SEC I

52.233-3 Protest after Award. 2026-02 SEC I 52.233-4 Applicable Law for Breach of Contract Claim. 2026-02 SEC I

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. 2026-02 SEC K

52.240-91 Security Prohibitions and Exclusions. 2026-02 SEC I

52.244-6 Subcontracts for Commercial Products and Commercial Services. 2026-02 SEC I

52.240-93 Basic Safeguarding of Covered Contractor Information Systems. 2026-02 SEC I

52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 SEC I 252.204-7003 Control of Government Personnel Work Product. 1992-04 SEC I

252.204-7014 Limitations on the Use or Disclosure of Information by Litigation Support Contractors. 2023-01 SEC I

252.225-7007 Prohibition on Acquisition of Certain Items from Communist Chinese Military Companies. 2018-12 SEC I

252.225-7048 Export-Controlled Items. 2013-06 SEC I

252.244-7000 Subcontracts for Commercial Products or Commercial Services. 2023-11 SEC I

CLAUSES IN FULL TEXT

CLAUSE

NO CLAUSE TITLE ALT NO/

DEV NO

YEAR-

MO

CLAUSE TEXT

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation. 2021-05

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS

EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) . "Covered defense telecommunications equipment or services," "covered mission,"Definitions "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) . Section 1656 of the National Defense Authorization Act for Fiscal Year 2018Prohibition (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) . The Offeror shall review the list of excluded parties in the System for AwardProcedures Management (SAM) at for entities that are excluded when providing any https://www.sam.gov equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) . If in its annual representations and certifications in SAM the Offeror hasRepresentation represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) . If the Offeror has represented in paragraph (d) of this provision that it "willDisclosures provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause-Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically processElectronic invoicing.

vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall-WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-WAWF training.

Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry,WAWF methods of document submission.

Electronic Data Interchange, or File Transfer Protocol.

(f) The Contractor shall use the following information whenWAWF payment instructions.

submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the followingDocument type.

document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

COMBO

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data TableDocument routing.

below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC

Issue By DoDAAC FA4417

Admin DoDAAC FA4417

Inspect By DoDAAC Provided at Award

Ship To Code Provided at Award

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) Provided at Award

Service Acceptor (DoDAAC) Provided at Award

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation Payment request.

appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements Receiving report.

of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Not Applicable

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

52.212-2 Evaluation-Commercial Products and Commercial Services. 2026-02

Evaluation-Commercial Products and Commercial Services (Feb 2026)

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

[Insert evaluation factors in the relative order of importance. For requests for proposals, state:

Evaluation factors other than price when combined are [significantly more important than price

/approximately equal to price/significantly less important] than price. For invitations for bids, list only price and price-related factors.]

(b) . The Government will evaluate offers for award purposes by adding the Options (if applicable) total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) . A written notice of award or acceptance of an offer furnished to the successful Notice of award Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.222-42 Statement of Equivalent Rates for Federal Hires. 2014-05

Statement of Equivalent Rates for Federal Hires (MAY 2014)

In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor ( ), this clause identifies the classes of service employees expected to be 29 CFR Part 4 employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C.5341 or 5 332.

This Statement is for Information Only: It is not a Wage Determination

Employee Class Monetary Wage-Fringe Benefits

(End of clause)

52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns. 2026-02

Notice of Price Evaluation preference for HUBZone Small Business Concerns (Feb 2026)

Evaluation preference.(a)

(1) Offers will be evaluated by adding a factor of 10 percent to the price of all offers, except-

(i) Offers from HUBZone small business concerns that have not waived the evaluation preference; and

(ii) Otherwise successful offers from small business concerns.

(b) . A HUBZone small business concern may choose to waive the Waiver of evaluation preference evaluation preference. If the concern waives the preference, the factor will be added to its offer for evaluation purposes.

Offeror chooses to waive the evaluation preference.

(c) A HUBZone joint venture agrees that, in the performance of the contract, at least 40 Joint venture.

percent of the aggregate work performed by the joint venture shall be completed by the HUBZone small business parties to the joint venture. Work performed by the HUBZone small business parties to the joint venture must be more than administrative functions.

(End of provision)

52.219-28 Postaward Small Business Program Rerepresentation. 2026-02

Postaward Small Business Program Rerepresentation (Feb 2026)

(a) . As used in this clause-Definitions

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly Affiliates controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it is, is not a small business concern under NAICS Code assigned to contract number.____ ____

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g) .] The Contractor represents that it(1) of this clause is, is not, a small disadvantaged business concern as defined in .13 CFR 124.1001

(3) . The Women-owned small business (WOSB) joint venture eligible under the WOSB Program Contractor represents that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The____ Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(4) . The Economically disadvantaged women-owned small business (EDWOSB) joint venture Contractor represents that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The____ Contractor shall enter the name and unique entity identifier of each party to the joint venture: __ .]

(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the . The Contractor represents that itSDVOSB Program is, is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __.]

(6) [HUBZone joint venture eligible under the HUBZone Program. Complete only if the offeror is a ] The offeror represents, as part of its offer, that ItHUBZone small business concern.

is, is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint ____ venture: .] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized signer's name ____ and title.]

(End of clause)

52.252-5 Authorized Deviations in Provisions. 2020-11

Authorized Deviations in Provisions (Nov 2020)

The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision (a) with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

The use in this solicitation of any [insert regulation name](48 CFR Chapter ) provision (b) ____ ____ with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of provision)

252.204-7016 Covered Defense Telecommunications Equipment or Services- Representation. 2019-12

COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-

REPRESENTATION (DEC 2019)

(a) . As used in this provision, "covered defense telecommunications equipment or Definitions services" has the meaning provided in the clause 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

(b) . The Offeror shall review the list of excluded parties in the System for Award Procedures Management (SAM) ( ) for entities excluded from receiving federal awards for https://www.sam.gov "covered defense telecommunications equipment or services".

(c) . The Offeror represents that it Representation does, does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of provision)

52.212-3 Offeror Representations and Certifications-Commercial Products and Commercial Services. (DEVIATION 2025-O0003 and 2025-

O0004) 2025-O0004 2025-03

Offeror Representations and Certifications-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) . As used in this provision-Definitions

Covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except-

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174).

Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate-

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"-

Sensitive technology-

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business (SDVOSB) concern means a small business concern- (1)

(i) Not less than 51 percent of which is owned and controlled by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; or

(2) A small business concern eligible under the SDVOSB Program in accordance with 13 CFR part 128 (see subpart 19.14).

(3) , as used in this definition, means a veteran as defined in 38 U.S.C. 101Service-disabled veteran (2), with a disability that is service connected, as defined in 38 U.S.C. 101(16), and who is registered in the Beneficiary Identification and Records Locator Subsystem, or successor system that is maintained by the Department of Veterans Affairs' Veterans Benefits Administration, as a service-disabled veteran.

Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program means an SDVOSB concern that-

(1) Effective January 1, 2024, is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300; or

(2) Has represented that it is an SDVOSB concern in SAM and submitted a complete application for certification to SBA on or before December 31, 2023.

Service-disabled veteran-owned small business (SDVOSB) Program means a program that authorizes contracting officers to limit competition, including award on a sole-source basis, to SDVOSB concerns eligible under the SDVOSB Program.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly Affiliates controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern, consistent with 13 CFR 124.1001, means a small business concern under the size standard applicable to the acquisition, that-

(1) Is at least 51 percent unconditionally and directly owned (as defined at ) by-13 CFR 124.105

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at ) individuals who are citizens of the United States; and13 CFR 124.104

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR124.104(c) (2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned-

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name.

The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern-

(1) Not less than 51 percent of which is owned and controlled by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women

Women-owned small business concern means a small business concern-

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b)

(1) . Any changes provided by the Offeror in paragraph (b)Annual Representations and Certifications

(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs .____

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) . The offeror represents as part of its offer that-Small business concern

(i) It is, is not a small business concern; or

(ii) It is, is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [ The offeror shall enter the name and unique entity identifier of each party to the

.]joint venture: ____________

(2) . [Veteran-owned small business concern Complete only if the offeror represented itself as a small .] The offeror represents as part of its offer that itbusiness concern in paragraph (c)(1) of this provision is, is not a veteran-owned small business concern.

(3) [SDVOSB concern. Complete only if the offeror represented itself as a veteran-owned small ] The offeror represents that itbusiness concern in paragraph (c)(2) of this provision.

is, is not an SDVOSB concern.

(4) . The offeror represents that itSDVOSB concern joint venture eligible under the SDVOSB Program is, is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [Complete only if the offeror represented itself as an SDVOSB concern

] [in paragraph (c)(3) of this provision. The offeror shall enter the name and unique entity identifier of .]each party to the joint venture: ____________

(5) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small The offeror represents that itbusiness concern in paragraph (c)(1) of this provision.] is, is not a small disadvantaged business concern as defined in 13 CFR 124.1001.

(6) . [Women-owned small business concern Complete only if the offeror represented itself as a small .] The offeror represents that itbusiness concern in paragraph (c)(1) of this provision is, is not a women-owned small business concern.

(7) The offeror represents that itWOSB joint venture eligible under the WOSB Program.

is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________

(8) The offeror Economically disadvantaged women-owned small business (EDWOSB) joint venture.

represents that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________

Note to paragraphs (c)(9) and (10): Complete paragraphs (c)(9) and (10) only if this solicitation is expected to exceed the simplified acquisition threshold.

(9) ). [Women-owned business concern (other than small business concern Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in

.] The offeror represents that itparagraph (c)(1) of this provision is a women-owned business concern.

(10) . If this is an invitation for bid, small business Tie bid priority for labor surplus area concerns offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________

(11) . [HUBZone small business concern Complete only if the offeror represented itself as a small .] The offeror represents, as part of its offer, that-business concern in paragraph (c)(1) of this provision

(i) It is, is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see…