Building_4900_-_Asbestos_&_Lead_Survey.pdf

APPENDIX A

ASBESTOS LABORATORY ANALYTICAL DATA/ LEAD ANALYTICAL DATA

Building 4900 Asbestos & Lead Report

Client:

Address:

Collected:

Project Name:

Address:

Lab ID Client ID

0143254-001

0143254-002

EMC LABS, INC. Laboratory Report

9830 S. 51st Street, Suite 6109, Phoenix, AZ 85044

Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

Bulk Asbestos Analysis by Polarized Light Microscopy

NVLAP#101926-0

ENVIRONMENTAL CONSULTANTS Job# I P.O.#: 14-0-380

#6 MEADOW HEIGHTS PROF. PARK Date Received: 07/03/2014

COLLINSVILLE IL 62234 Date Analyzed: 07/11/2014

07/02/2014 Date Reported: 07/11/2014

SCOTT AIR FORCE BASE-BLDG 4900 EPA Method: EPA 600/R-93/116

Submitted By: JEFF FAUST

Collected By:

0143254

Sample Location

Layer Name I Sample Description

Asbestos Asbestos Type Detected (%)

Non-Asbestos Constituents

LAYER 1

Drywall, White! Brown

LAYER2

Joint Compound, White

LAYER 3

Texture, White/ Blue

LAYER 1

Drywall, White/ Brown

LAYER2

Joint Compound, White

LAYER 3

Texture, White

No None Detected

No None Detected

No None Detected

No None Detected

No None Detected

No None Detected

Cellulose Fiber

Gypsum Mica Carbonates

Carbonates Mica Quartz Binder/Filler

Cellulose Fiber

Carbonates Mica Quartz Binder/Filler

Cellulose Fiber

Gypsum Mica Carbonates

Carbonates Mica Quartz Binder/Filler

Cellulose Fiber

Carbonates Mica Quartz Binder/Filler

10%

90%

100%

<1%

99%

10%

90%

100%

<1%

99%

Collected:

Project Name:

Address:

Lab ID

Client ID

0143254-003

0143254-004

0143254-005

EMC LABS, INC. Laboratory Report

9830 S. 51st Street, Suite 8109, Phoenix, AZ 85044

Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

Bulk Asbestos Analysis by Polarized Light Microscopy

NVLAP#101926-0

ENVIRONMENTAL CONSULTANTS Job#/ P.O.#: 14-0-380

#6 MEADOW HEIGHTS PROF. PARK Date Received: 07/03/2014

COLLINSVILLE IL 62234 Date Analyzed: 07/11/2014

07/02/2014 Date Reported: 07/11/2014

SCOTT AIR FORCE BASE-BLDG 4900 EPA Method: EPA 600/R-93/116

Submitted By: JEFF FAUST

Collected By:

0143254

Sample Location

Layer Name/ Sample Description

Asbestos Asbestos Type Detected (%)

Non-Asbestos Constituents

LAYER 1

Drywall, White/ Brown

LAYER2

Joint Compound, White

LAYER 3

Texture, White/ Green

LAYER 1

12" Floor Tile, White/ Gray

LAYER 2

Mastic, Clear

LAYER 1

12" Floor Tile, White/ Gray

LAYER 2

Mastic, Clear

No None Detected

Yes Chrysotile

No None Detected

No None Detected

No None Detected

No None Detected

No None Detected

3%

Cellulose Fiber

Carbonates Gypsum Binder/Filler

Carbonates Mica Quartz Binder/Filler

Carbonates Gypsum Binder/Fi11er

Carbonates Quartz Binder/Filler

Cellulose Fiber

Carbonates Gypsum Binder/Filler

Carbonates Quartz Binder/Filler

Cellulose Fiber

Carbonates Gypsum Binder/Filler

10%

90%

97%

100%

100%

1%

99%

100%

1%

99%

Collected:

Project Name:

Address:

Lab ID Client ID

0143254-006

0143254-007

0143254-008

0143254-009

0143254-010

EMC LABS, INC. Laboratory Report

9830 S. 51st Street, Suite 6109, Phoenix, AZ 85044

Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

0143254

Bulk Asbestos Analysis by Polarized Light Microscopy

NVLAP#101926-0

ENVIRONMENTAL CONSULTANTS Job# I P.O.#: 14-0-380

#6 MEADOW HEIGHTS PROF. PARK Date Received: 07/03/2014

COLLINS VILLE IL 62234 Date Analyzed: 07/11/2014

07/02/2014 Date Reported: 07/11/2014

SCOTT AIR FORCE BASE-BLDG 4900 EPA Method: EPA 600/R-93/116

Submitted By: JEFF FAUST

Collected By:

Sample Location

Layer Name I Sample Description

Asbestos Asbestos Type Non-Asbestos Constituents

LAYER 1

12" Floor Tile, White/ Gray

LAYER 2

Mastic, Clear

Window Caulk/ Glaze, Beige

Detected {%)

No None Detected

No None Detected

No None Detected

Window Caulk/ Glaze, White/ Blue No None Detected

Window Caulk/ Glaze, Beige No None Detected

LAYER 1 No None Detected Asphalt Roof Shingle, Lt. Green/ Gray/ Black

LAYER2 No None Detected Felt, Black

Carbonates Quartz Binder/Filler

Cellulose Fiber

Carbonates Gypsum Binder/Filler

Carbonates Quartz Binder/Filler

Carbonates Quartz Binder/Filler

Carbonates Quartz Binder/Filler

100%

<1%

99%

100%

100%

100%

Fibrous Glass 20%

Carbonates Gypsum Quartz Binder/Filler 80%

Cellulose Fiber 55%

Carbonates Gypsum Binder/Filler 45%

EMC LABS, INC.

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044

Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

Bulk Asbestos Analysis by Polarized Light Microscopy

NVLAP#101926-0

ENVIRONMENTAL CONSULTANTS

#6 MEADOW HEIGHTS PROF. PARK

COLLINSVILLE IL 62234

Job# I P.O.#:

Date Received:

Date Analyzed:

Laboratory Report

0143254

Collected: 07/02/2014 Date Reported:

14-0-380

07/03/2014

07/11/2014

07/11/2014

Project Name: SCOTT AIR FORCE BASE-BLDG 4900

Address:

Lab ID Client ID

0143254-011

0143254-012

0143254-013

0143254-014

0143254-015

Sample Location

Layer Name/ Sample Description

LAYER 1

Asphalt Roof Shingle, White/ Black

LAYER2

Felt, Black

LAYER 1

Asphalt Roof Shingle, White/ Black

LAYER2

Felt, Black

Asphalt Roof Shingle, Brown/ Black

Asphalt Roof Shingle, Brown/ Black

Asphalt Roof Shingle, Brown/ Black

EPA Method:

Submitted By:

Collected By:

EPA 600/R-93/116

JEFF FAUST

Asbestos Asbestos Type Non-Asbestos Constituents Detected (%)

No None Detected

No None Detected

No None Detected

No None Detected

No None Detected

No None Detected

No None Detected

Fibrous Glass

Carbonates Gypsum Quartz Binder/Filler

Cellulose Fiber

Carbonates Gypsum Binder/Filler

Fibrous Glass

Carbonates Gypsum Quartz Binder/Filler

Cellulose Fiber

Carbonates Gypsum Binder/Filler

Fibrous Glass

Carbonates Gypsum Quartz Binder/Filler

Fibrous Glass

Carbonates Gypsum Quartz Binder/Filler

Fibrous Glass

Carbonates Gypsum Quartz Binder/Filler

20%

80%

55%

45%

20%

80%

55%

45%

20%

80%

20%

80%

20%

80%

EMC LABS, INC. Laboratory Report

Address:

9830 S. 51st Street, Suite B109, Phoenix, AZ 85044

Phone: 800-362-3373 or 480-940-5294 - Fax: (480) 893-1726

Bulk Asbestos Analysis by Polarized Light Microscopy

NVLAP#101926-0

ENVIRONMENTAL CONSULTANTS

#6 MEADOW HEIGHTS PROF. PARK

COLLINSVILLE IL 62234

Job# I P.O.#:

Date Received:

Date Analyzed:

Collected: 07/02/2014 Date Reported:

14-0-380

07/03/2014

07/11/2014

07/11/2014

Project Name: SCOTT AIR FORCE BASE-BLDG 4900

Address:

EPA Method:

Submitted By:

Collected By:

EPA 600/R-93/116

JEFF FAUST

0143254

Lab ID

Client ID

Sample Location

Layer Name / Sample Description

Asbestos Detected

Asbestos Type

Non-Asbestos Constituents l/ s I �l

Analyst - Kenneth Scheske Signatory - Lab Director - Kurt Kettler

DisUnclly stratified, easily separable layers of samples are analyzed as subsamples o!lhe whole and are reported separately for each discernible layer. All analyses are derived from calibrated visual estimate and measured in area µercentunless otherwise noted. The report applies lo 1he standards or procedures Identified and to the sample(s) tested. The fest results are notnecessarily!ndica!ed or representative of the qualffi es of the lo\ from which the sample was taken or of apparently identical or slmilar p,ociJcts, n or do !hey represent an ongoing qualtty assurance program unless so noted. These reports are for !he exclusive use of!he addressed client and

1hat Uieywill not be reproduced lmo!y or in part for advertising or other purposes over our signature or in connection wflil our name 11\lhout special written permission. The report shall not be reproduced except in full, wfliloul written approval by our laboratory. The samples not destroyed in testing are retained a maximum of thirty days. The labor ator ymeasuremenlofuncertaintyfor !he test m ethod is apprnxlmatelyless than 1 hyarea percent.

Accredaed by the National Institute of Standards and Technology, Voluntary Labora\OfY Accr editation Program for selected lest method for asbestos. The accred�ation or any r eports generated by !his laborator y in no way constitutes or Implies product certification, approval. or endors ement by the Nalional Institute of Standards and Technology. The rnport must not be used by the client to claim product certificaUon, approval, or endorsement by NVLAP, NIST. or any agency of the Federal Gover nment. Polarized Ugh\ Mic1oscopy may not be conslstenUy reliable in detecting ashestos In Hoar coverings and similar non-friable organlcallV bound materials.

COMPANY NAME:

CONTACT:

Phone/Fax:

Email:

CHAIN OF CUSTODY

EMC Laboratories

9830 S. 51 ST St., Ste B-109 Phoenix, AZ 85044

(800) 362-3373 Fax (480) 893-1726

ENVIRONMENTAL CONSULTANTS, LLC

#6 Meadow Heights Professional Park Collinsville. IL 62234 Jeff Faust

(618) 343-3590 I (618) 343-3597 jeff@environmentalconsultantsllc.com jim@environmentalconsultantsllc.com

BILL TO:

Same

LAB# : / l( 3 ;}_'�'LI

TAT: 3-5�

Rec'd: JUL O::! P.M.

(If Different Location)

Now Accepting: VISA- MASTERCARD Price Quoted: $ I Sample $ __ I Layers COMPLETE ITEMS 1-4: (Failure to complete any items may cause a delay in rocessing or analyzing your samples)

1. TURNAROUND TIME: [4hr rush) [8hr rush} [1-Day] [2-Day] [3-Day] [5-Day] [6-10 Day] _,.,.friar confirmation of turnaround time Is� '"*"*Additional charges for rush analysis (please call marketing department for pricing details) **"'*Laboratory analysis may be subject to delav if credit tenns are not met

2. TYPE OF ANALYSIS: @_ulk-P..!J)Af [Air-PCM] [Lead] [Point Count] [Fungi: AOC, W-C, Bulk, Swab, Tape]

3. DISPOSAL INSTRUCTIONS: .£ �- .• e or samples at EMCD I [Return samples to me at my expense]

4. Project Name:

P.O. Number:

EMC

SAMPLE

I,? '.:', u 5,/o

fl. R, 9

JO.II,/,

/311./,/'

/If vou do not · · 1.., WIii a,soose of samples J!QJ;//Wi from analysis.)

SCOTT AIR FORCE BASE BUILDING 4900

Project Number: 14-0-380

CLIENT DATE& TIME LOCATION/MATERIAL

TYPE

Samples Accepted Yes / No

AIR SAMPLE INFO I COMMENTS

SAMPLE# SAMPLED

01-03 7/2/14 DRYWALL SYSTEMS - WALLS/CEILINGS

04-06 12" WHITE FLOOR TILE/MASTIC

07-09 VOiP

10-12 WINDOW CAULK/GLAZE

13-15 ASPHALT ROOF SHJNGLES/FEL T

16-18 ASPHALT ROOF SHINGLES (SHED)

(v N y N y N y N y N y N y N y N y N

ON OFF FLOW

RATE

le-----+------------1--------1-----------·--i------l----l----+----,I y N y N

SPECIAL INSTRUCTIONS: _.,,;.7_�7"'--/_.,,_,:__ _______ _

Sample Collector: IB,_,- J�LFRY �UST 1100-6582\ (Signature)_\,,��L�_,�_,--1-/�=�· -"-�-=-------,---,---

Relinquished by: ( /,,, .'/ � Date/Time: 2/Lht Received�

-r��, Dateffime: 7/3/IL/ ,i�- r,, .. · - ';;uRelinquished by: -- """"""" Dateffime: 7/:? � Received by: � �/ Oat��e: 7�)-fLl

Relinquished by: Datemme Received by: __________ Datemme: ____ _ ** In the event of any dispute between the above parties for these services or otheiwise, parties agree tt1at jurisdiction and venue will be in Phoenix, Arizona and prevailing party will be entitled to attorney's fees and court costs.

APPENDIXB

LEAD ANALYSIS DATA

EMC LAB#:

CLIENT:

EMC LABS, INC.

9830 South s1•t Street, Suite 8-109 / PHOENIX, ARIZONA 85044 / 480-940-5294 or 800-362-3373 / FAA 480-893-1726 emcJab@emclabs.com

LEAD (Pb) IN PAINT CHIP SAMPLES

EMC SOP METHOD #L01/1 EPA SW-846 METHOD 7420

L52818 DATE RECEIVED:

Environmental Consultants, LLC REPORT DATE:

DATE OF ANALYSIS:

CLIENT ADDRESS: #6 Meadow Heights Professional Park P.O.NO.:

Collinsville, IL 62234

07/03/14

07/09/14

07/08/14

PROJECT NAME: Scott Air Force Base - Building 4900 (Lead) PROJECT NO.: 14-0-380

EMC# SAMPLE CLIENT DESCRIPTION REPORTING %PbBY

L52818- DATE/14 SAMPLE # LIMIT WEIGHT

(%Pb by weight)

I 07/02 LOI Gray Floor Paint 1.0 l.2QAA

2 07/02 L02 Beige Interior Wall Paint 0.010 0.010

3 07/02 L03 White Ceiling Paint 0.010 BRL

4 07/02 L04 Blue Interior Wall Paint 0.010 BRL

5 07/02 LOS Tan Exterior Wall Paint 1.0 5.82AA

6 07/02 L06 Brown Exterior Paint 1.0 IQ.SAA " = Dilution Factor Changed * :::: Excessive Substrate May B1as Sample Results BRL :::: Below Reportable L1m1ts # :::: Very Small Amount or Sample Submitted, May Affect Result

This report applies to the standards or procedures identified and to the samples tested only. The test results are not necessarily indicative or representative of the qualities of the lot from which the sample was taken or of apparently identical or similar products, nor do they represent an ongoing quality assurance program unless so noted. Unless otherwise noted, all quality control analyses for the samples noted above were within acceptable limits_

Where it is noted that a sample with excessive substrate was submitted for laboratory analysis, such analysis may be biased. The lead content of such sample may, in actuality, be greater than reported. EMC makes no warranty, express or implied, as to the accuracy of the analysis of samples noted to have been submitted with excessive substrate. Resampling is recommended in such situations to verify original laboratory results.

These reports are for lhe exclusive use of the addressed client and are rendered upon the condition that they will not be reproduced wholly orln part for advertising or other purposes over our signature or in connection with our name without special written pennission. Samples not destroyed in testing are retained a maximum of sixty (60) days.

ANALYST'-: ��---,,��-'�'--�"""11"����

Jason Thompson Rev. 11/30/08 llsr kf;;� QA COORDINATOR'-:_, _______ _ Kurt Kettler

Page 1 of I

COMPANY NAME:

CONTACT:

Phone/Fax:

Email:

CHAIN OF CUSTODY

EMC Laboratories 9830 S. 51 sr St., Ste B-109

Phoenix, AZ 85044

(800) 362-3373 Fax (480) 893-1726

ENVIRONMENTAL CONSULTANTS, LLC

#6 Meadow Heights Professional Park Collinsville, IL 62234 Jeff Faust

(618) 343-3590 / (618) 343-3597 ieff@environmentalconsultantsllc.com jim@environmentalconsultantsllc.com

BILL TO:

Same

LAB#: 'c/'5Jt)'3

TAT: 3-S'

e,

· Ltt.--(,,4.

Rec'd: �6

Now Accepting: VISA- MASTERCARD Price Quoted: $. ___ /Sample $ __ /Layers

COMPLETE ITEMS 1-4: (Failure to complete any items may cause a delay in processing or analyzing your samples)

1. TURNAROUND TIME: [4hr rush) [8hr rush} [1-Day] [2-Day] @ay] [5·D.iv[6-10 Day] *"'-e.ct.o.r confirmation of turnaround ttme Is� ****Additional charges for rush analysis (please cal! marketing department for pricing details) **""'Laboratory analysis may be subject to delay if credit terms are not mQ

2. TYPE OF ANALYSIS: [Bulk-PLM] [Air-PCM] ead �oint Count] [Fungi: AOC, W-C, Bulk, Swab, Tape]

3. DISPOSAL INSTRUCTIONS: du1spose of samples at'"""'., / [Return samples to me at my expense]

4. Project Name:

P.O. Number:

EMC

SAMPLE

l[,;

I") h

({fvou do not indica,e w ce, EMC will disoose of samples °" """" from analysis.)

SCOTT AIR FORCE BASE - BUILDING 4900 {LEAD}

CLIENT DATE&TIME

SAMPLE# SAMPLED

L01 7/2/14

L02

L03

L04

L05

L06

Project Number: 14-0-380

LOCATION/MATERIAL

TYPE

GRAY FLOOR PAINT

BEIGE INTERIOR WALL PAINT

WHITE CEILING PAINT

BLUE INTERIOR WALL PAINT

TAN EXTERIOR WALL PAINT

BROWN EXTERIOR PAINT

Samples AIR SAMPLE INFO/ COMMENTS

Accepted ON OFF FLOW

Yes / No RATE

UN

\ N y N ' N

N t{;iJ N y N y N y N y N y N y N y N y N y N

*" In the event of any dispute between the above parties for these services or otherwise, parties agree that jurisdiction and venue will be in Phoenix, Arizona and prevailing party will be entitled to attorney's fees and court costs.

APPENDIXC

BACKGROUND ON ASBESTOS

BACKGROUND ON ASBESTOS

HISTORICAL PERSPECTIVE

The word asbestosis derived from a Greek adjective meaning inextinguishable. The "miracle mineral" as it was referred to by the Greeks, was admired for its soft and pliant properties, as well as its ability to withstand heat. Asbestos was spun and woven into cloth in the same manor as cotton. It was also utilized for wicks in sacred lamps. Romans likewise recognized the properties of asbestos and it is thought that they cleaned asbestos tablecloths by throwing them into the flames of a fire.

From the time of the Greeks and Romans in the first century until its re-emergence in the eighteenth centmy, asbestos received little attention or use. It was not available in large amounts until extensive deposits were discovered in Canada in the late 1800's. Following this discoveiy, asbestos emerged as an insulating component in thermal system insulation (TS!) for boilers, pipes and other high temperahire applications and as a reinforcement material for a variety of products.

CHARACTERISTICS OF ASBESTOS

Asbestos is a naturally occurring mineral. It is distinguished from other minerals by the fact that its crystals form long, thin fibers. Deposits of asbestos are found throughout the world. The primmy sites of commercial production are the Commonwealth of Independent States, Canada, China, and Brazil. Zimbabwe and South Africa. Asbestos is also mined commercially in limited quantities in the United States, in California and Ve1mont.

Asbestos minerals are divided into two groups - serpentine and amphibole. The distinction between groups is based upon a mineral's crystalline structure - serpentine minerals have a sheet or layered structure, amphiboles have a chain-like crystal structure.

Chrysotile, the only asbestos mineral in the serpentine group, is the most commonly used type of asbestos and accounts for approximately 95% of the asbestos found in buildings in the

United States. Clnysotile is commonly known as "white asbestos," so named for its natural color.

Five types of asbestos are found in the amphibole group. Amosite the second most likely type to be found in buildings is oftcu referred to as "brown asbestos." As you might assume, in its natural state amosite is brown in color.

Crocidolite._"Blue asbestos," is also an amphibole. Crocidolite was used in high temperature insulation applications. The remaining three types of asbestos in the amphibole group are:

anthophyllite, tremolite, and actinolite. These varieties are of little commercial value.

Occasionally they are found as contaminants in asbestos containing materials.

Once extracted from the earth asbestos containing rock is crushed, milled (ground) and graded.

This produces thread-like fibers of material. What actually appears, as a fiber is an agglomeration of hundreds or thousands of fibers, each of which can be divided even further into microscopic fibers.

USES OF ASBESTOS

Asbestos has been used in literally thousands of products. Collectively, these are frequently referred to as asbestos-containing material (ACM). Asbestos gained widespread use because it is plentiful, readily available, and low in cost. Because of its unique properties - fire resistance, high tensile strength poor heat and electrical conductivity, and being generally impervious to chemical attacks - asbestos proved well suited for many uses in the construction trades.

One of the most common uses for asbestos is as a fireproofing_material. It was sprayed on steel beams, columns, and decking that were used in construction of multi-storied buildings. This application prevented these structural members from warping or collapsing in the event of fire.

Chrysotile was the most commonly used asbestos constituent in sprayed-on fireproofing.

Asbestos comprised 5 - 95 percent of the fireproofing mixture and was used in conjunction with materials such as vermiculite, sand, cellulose fibers, gypsum and a binder such as calcium carbonate. These materials are soft and may be fluffy in appearance and to the touch. They vary in color from white to dark gray, and occasionally they have been painted or encapsulated with a clear or colored sealant. The material may be exposed or concealed behind a suspended ceiling. Application to structural members (beams and columns) often resulted in some material being sprayed on walls and ceilings as well. This is referred too as overspray.

Asbestos is added to a variety of building materials to enhance strength. It is found in concrete and concrete-like products. Asbestos-containing cement products generally contain Portland cement, aggregate, and Cluysotile fibers. The asbestos content may range up to 50 percent by weight depending on the use of the product. Asbestos cement products are used as siding and roofing shingles; as wallboard, as corrugated and flat sheets for roofing, cladding and partitions; and as pipes. Asbestos has also been added to asphalt vinyl and other materials to make products like roofing felts, exterior siding, floor tile, joint con-pounds and adhesives.

Fibers in asbestos cement, asphalt, and vinyl are usually firmly bound in the matrix and will be released only if the material is mechanically damaged, for example by drilling, cutting�or sanding. Roofing shingles and siding may also show slow deterioration due to weathering.

As an insulator, asbestos received widespread use for thermal insulation and condensation control. It was usually sprayed, trowel applied, or facto1y installed on or within equipment.

Asbestos proved valuable as a component of acoustical plaster. The material was applied by trowel or by spraying on ceilings and sometimes walls. It varies in color from white to gray -rarely was it painted as a noticeable loss of acoustical value occurs. Similarly, as decorative product asbestos was mixed with other materials and sprayed on ceilings and walls to produce a sot textured appearance.

FRIABLE VS. NON-FRIABLE ACM

The U.S. Environmental Protection Agency (EPA) distinguishes between friable and non friable forms of ACM. Friable ACM contains more than I% asbestos and can be crumbled, pulverized, or reduced to powder by hand pressure when dry." Other things being equal, friable

ACM is thought to release fibers into the air more readily; however, many types of non-friable

ACM can also release fibers if disturbed.

CATEGORIES OF ASBESTOS-CONTAINING BUILDING MATERIALS

EPA identifies three categories of ACM used in buildings:

Surfacing Materials - ACM sprayed or troweled on surfaces (walls, ceilings, and structural members) for acoustical, decorative, or fireproofing purposes. This includes plaster and fireproofing insulation.

Thermal System Insulation (TSI) - Insulation used to inhibit heat transfer or prevent condensation on pipes, boilers, tanks, ducts, and various other components of hot and cold water system and heating, ventilation, and air conditioning (HY AC) systems. This includes pipe lagging, pipe wrap, block, batt, and blanket insulation; cements and "muds"; and a variety of other products such as gaskets and ropes.

Miscellaneous Materials - Other, largely non-friable products and materials such as floor tile, ceiling tile, roofing felt, concrete pipe, outdoor siding and fabrics.

While it is often possible to "suspect" that a material or product is or contains asbestos by visual determination actual determination can only be made by instrumental analysis. The EPA requires that the asbestos content of suspect materials be determined by collecting bulk samples and analyzing them by polarized light microscopy (PLM). The PLM technique deteimines both the percent and type of asbestos in the bulk material.

However, some of these materials do not have to be inspected and inventoried under the

Asbestos Hazard Emergency Response Act (AHERA) Rule. Asbestos-containing building materials (ACBM) as defined by the Rule excludes materials installed outside a building ( e.g., roofing felt and siding) and most fabric materials.

APPENDIXD

GLOSSARY/DEFINITION OF TERMS

GLOSSARY/DEFINITION OF TERMS

Asbestos: The asbestiform varieties ofserpentinite (chrysotile), riebeckite crocidolite, cummingtonite-grunerite, anthophyllite and actinolite-tremolite. For purposes of dete1mining respiratory and worker protection, both the asbestiform and non-asbestiform varieties of the above minerals and any of these materials that have been chemically treated and/or altered shall be considered as asbestos.

Asbestos Containing Building Material: Any material which is or is suspected of being or in any way contaminated with, an asbestos containing material which is to be removed from a work area for disposal.

Asbestos Containing Material (ACM): Any material containing more than 1 percent of any type of asbestos by weight or mixture of types.

Asbestos Debris: Pieces of ACBM that can be identified by color, texture, or composition; or dust if the dust has been determined by an accredited inspector to be ACM.

Category I Non-friable ACM: Includes asbestos-containing packing, gaskets, asphaltic roofing products, resilient flooring, pliable sealants, and pliable mastics (NESHAP definition).

Category II Non-friable AMC: Includes all non-friable asbestos-containing materials, which are not Category I Non-friable ACM (NESHAP definition).

Class I Work Activity: The removal of thermal system insulation and surfacing ACM and P ACM (OSHA definition).

Class II Work Activity: The removal of ACM which is not thermal system insulation of surfacing material (OSHA definition).

Class III Work Activity: Repair and maintenance operations where thermal system insulation and surfacing ACM and PACM may be disturbed (OSHA definition).

Class IV Work Activity: Maintenance and custodial activities during which employees contact but do not disturb ACM and P ACM, and activities to clean up dust, waste and debris resulting from Class I, II, or III activities (OSHA definition).

Competent Person: An employee working at a building owned or leased by the client that oversees the asbestos-related duties in the building and one who has a solid working knowledge of asbestos handling procedures.

Designated Person: A person appointed by a local education agency to be in charge of the asbestos control program (AHERA definition).

Encapsulant: A material that su11'ounds or embeds asbestos fibers in an adhesive matrix to prevent the release of fibers.

Encapsulation: Treatment of asbestos containing materials with encapsulant.

Friable Asbestos Material: Material that contains more than 1 percent asbestos by weight and that can be crumbled, pulverized, of reduced by hand pressure.

Functional Spaces (areas): Spatially distinct units within a building which contain identifiable populations of building occupants.

Glovebag: A device used to remove a section of pipe insulation without isolating the entire space or room.

HEPA Filter: A High Efficiency Particular Air filter capable of trapping and retaining 99.97 percent of asbestos fibers greater than 0.3 microns in diameter.

HEP A Filter Vacuum Collection Equipment: High efficiency particulate air filtered vacuum collection equipment with a filter system capable of collecting and retaining asbestos fibers.

Filters should be 99 .97 percent efficiency for retaining fibers of 0.3 microns or larger.

Homogeneous Sampling Area: An area of material which appears similar throughout in terms of color, texture, and date of application. Some inspection reports refer to this as "homogeneous material".

Medical Surveillance Program: Periodically examining all employees exposed at or above the OSHA permissible exposure limit or excursion limit, or who engage in a particular type of asbestos-related activity for a specified period of time, of who wear a negative pressure respirator during work.

Operations and Maintenance Plan: Set of specific procedures and practices applied to building cleaning, maintenance, renovation and general operation to maintain the building as free of asbestos contamination as possible.

Presumed Asbestos-containing Material (P ACM): Thermal system insulation and surfacing material found in a building built no later than 1980 (OSHA definition).

Protection Factor: The ratio of the ambient concentration of an airborne substance to the concentration of the substance inside the respirator at the breathing zone of the wearer. The protection factor is a measure of the degree of protection provided by a respirator to the wearer.

Respiratory Protection program: A set of procedures and equipment required by OSHA if employees wear respirators.

Response actions: Actions specified in the management plan to control ACM; includes repair, O&M, removal, encapsulation, and enclosure.

Wet Cleaning: The process of eliminating asbestos contamination from building surfaces and objects by using cloths, mops, or other cleaning utensils which have been dampened with amended water or diluted removal encapsulate and afterwards thoroughly decontaminated or dispensed of as asbestos contaminated waste.

United States Department of Commerce National Institute of Standards and Technology

Certificate of Accreditation to 150/lEC 17025:2005

NVLAP LAB CODE: 101926-0

EMC Labs, Inc.

Phoenix, AZ is accredited by the National Voluntary Laboratory Accreditation Program for specific services, listed on the Scope of Accreditation, for:

BULK ASBESTOS FIBER ANALYSIS

This laboratory is accredited in accordance with the recognized International Standard /SOI/EC 17025:2005.

This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint 1SO-ILAC-IAF Communique dated January 2009).

2013-07-01 through 2014-06-30

Effective dates

«"'.,n- o•eo% ,q_� � � f�X :

tJ � §f � # e,.-471:s o<f �

� tZ . .fM�LQ For the National Institute of Standards and Technology

NVLAP-01C (REV. 2009-01-28)

r;..n"'t?� f,\ em ® National Voluntary

LJ\J YY LS�� Laboratory Accreditation Program

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

EMC Labs, Inc.

9830 S. 51st St. Suite B-109 Phoenix, AZ 85044-5677

Mr. Kurt A. Kettler Phone: 480-9,40-5294 Fax: 480-893-1726

E-Mail: kkettler@eatthlink.net URL: http://www.emclabs.com

BULK ASBESTOS FIBER ANALYSIS (PLM) NVLAP LAB CODE 101926-0

NVLAP Code Designation I Description

18/AOl EPA 600/M4-82-020: Interim Method for the Determination of Asbestos in Bulk Insulation

Samples

18/A03 EPA 600/R-93/116: Method for the Determination of Asbestos in Bulk Building Materials

2013-07-01 through 2014-06-30

Effeo/ive dates

For the National Institute of Standards and Technology

NVLAP-01S (REV. 2005-05-19)

AIHA

atory Accreditation Programs, LLC

AIHA Laboratory Accreditation Programs, LLC acknowledges that

EMC Labs, Inc.

9830 S. 51st Street, Suite B-109, Phoenix, AZ 85044-5671

Laboratory ID: 101586 bas fulfilled the requirements of the AIHA Laboratory Accreditation Programs (AIHA-LAP), LLC thereby, conforming to the

ISO/IEC 17025:2005 international standard, General Requirements for the Competence of Testing and Calibration Laboratories.

The above named laboratory, along with all premises from which key activities are performed, as listed above, have been accredited by

AIHA-LAP, LLC in the following:

ACCREDITATION PROGRAMS

./ INDUSTRIAL HYGIENE

./ ENVIRONMENTAL LEAD

./ ENVIRONMENTAL MICROBIOLOGY

0 FOOD

Accreditation Expires: 06/01/2011 Accreditation Expires: 06/01/2011 Accreditation Expires: 06/01/2011 Accreditation Expires:

Specific Field(s) of Testing (FoT)/Method(s) within each Accreditation Program for which the above named laboratory maintains accreditation is outlined on the attached Scope of Accreditation. Continued accreditation is contingent upon successful on-going compliance with AIHA-LAP, LLC requirements. This certificate is not valid without the attached Scope of Accreditation. Please review the AIHA-LAP, LLC website (www.aihaaccreditedlabs.org) for the most current status of the scope of accreditation.

�A-,/(� Pamela A. Kostle, CJH Chairperson, Analytical Accreditation Board

Date Issued: 06/01/2009