FA3030-17-T-0009.pdf

SEE ADDENDUM

(No Collect Calls)

FA303017T0009 08-Jun-2017

b. TELEPHONE NUMBER

(325) 654-6104

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 23 Jun 2017

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

FA30309. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

ANTHONY M. LEANDER

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

F1Z3127055AW01

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

17TH CONTRACTING SQUADRON -FA3030

210 SCHERZ BLVD

BROCK.WILSON@US.AF.MIL

GOODFELLOW AFB TX 76908-4705

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE F1Z312 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

17 CES/CEOER - F1Z312

KENDOL DUNLAP

460 E. KEARNEY BLVD

GOODFELLOW AFB TX 76908

TEL: 325-654-5584 FAX:

(325) 654-5149FAX:

TEL: (325) 654-1945

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$15,000,000

NAICS:

238220

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF78

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

FA303017T0009

Section SF 1449 - CONTINUATION SHEET

WD 15-5251 (REV. -1)

WD 15-5251 (Rev.-1) was first posted on www.wdol.gov on 02/28/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5251

Daniel W. Simms Division of | Revision No.: 1

Director Wage Determinations | Date Of Revision: 02/22/2017

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Texas

Area: Texas Counties of Irion, Tom Green

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I $12.71

01012 - Accounting Clerk II 14.26

01013 - Accounting Clerk III 15.96

01020 - Administrative Assistant 22.33

01035 - Court Reporter 16.93

01041 - Customer Service Representative I 10.00

01042 - Customer Service Representative II 11.24

01043 - Customer Service Representative III 12.27

01051 - Data Entry Operator I 11.43

01052 - Data Entry Operator II 12.48

01060 - Dispatcher, Motor Vehicle 16.39

01070 - Document Preparation Clerk 11.95

01090 - Duplicating Machine Operator 11.95

01111 - General Clerk I 11.83

01112 - General Clerk II 16.25

01113 - General Clerk III 16.70

01120 - Housing Referral Assistant 19.21

01141 - Messenger Courier 9.96

01191 - Order Clerk I 12.01

01192 - Order Clerk II 14.17

01261 - Personnel Assistant (Employment) I 14.21

01262 - Personnel Assistant (Employment) II 17.32

01263 - Personnel Assistant (Employment) III 18.25

01270 - Production Control Clerk 19.53

01290 - Rental Clerk 13.42

01300 - Scheduler, Maintenance 15.37

01311 - Secretary I 15.37

01312 - Secretary II 17.77

01313 - Secretary III 19.21

01320 - Service Order Dispatcher 14.63

01410 - Supply Technician 22.33

01420 - Survey Worker 15.22

01460 - Switchboard Operator/Receptionist 11.31

01531 - Travel Clerk I 11.15

01532 - Travel Clerk II 12.06

01533 - Travel Clerk III 13.19

01611 - Word Processor I 12.98

01612 - Word Processor II 14.56

01613 - Word Processor III 16.29

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 19.73

05010 - Automotive Electrician 19.89

05040 - Automotive Glass Installer 18.62

05070 - Automotive Worker 18.62

05110 - Mobile Equipment Servicer 16.12

05130 - Motor Equipment Metal Mechanic 21.12

05160 - Motor Equipment Metal Worker 18.62

05190 - Motor Vehicle Mechanic 21.40

05220 - Motor Vehicle Mechanic Helper 14.89

05250 - Motor Vehicle Upholstery Worker 17.39

05280 - Motor Vehicle Wrecker 18.62

05310 - Painter, Automotive 19.89

05340 - Radiator Repair Specialist 18.62

05370 - Tire Repairer 13.99

05400 - Transmission Repair Specialist 21.12

07000 - Food Preparation And Service Occupations

07010 - Baker 10.56

07041 - Cook I 10.64

07042 - Cook II 12.34

07070 - Dishwasher 8.11

07130 - Food Service Worker 9.00

07210 - Meat Cutter 14.26

07260 - Waiter/Waitress 8.37

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 19.02

09040 - Furniture Handler 11.85

09080 - Furniture Refinisher 19.02

09090 - Furniture Refinisher Helper 14.25

09110 - Furniture Repairer, Minor 16.63

09130 - Upholsterer 19.02

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 9.06

11060 - Elevator Operator 9.06

11090 - Gardener 12.32

11122 - Housekeeping Aide 9.97

11150 - Janitor 11.51

11210 - Laborer, Grounds Maintenance 10.58

11240 - Maid or Houseman 8.58

11260 - Pruner 9.57

11270 - Tractor Operator 12.83

11330 - Trail Maintenance Worker 10.58

11360 - Window Cleaner 11.52

12000 - Health Occupations

12010 - Ambulance Driver 15.14

12011 - Breath Alcohol Technician 17.45

12012 - Certified Occupational Therapist Assistant 24.33

12015 - Certified Physical Therapist Assistant 26.70

12020 - Dental Assistant 14.28

12025 - Dental Hygienist 34.36

12030 - EKG Technician 25.38

12035 - Electroneurodiagnostic Technologist 25.38

12040 - Emergency Medical Technician 15.14

12071 - Licensed Practical Nurse I 15.60

12072 - Licensed Practical Nurse II 17.45

12073 - Licensed Practical Nurse III 19.45

12100 - Medical Assistant 12.78

12130 - Medical Laboratory Technician 15.03

12160 - Medical Record Clerk 13.76

12190 - Medical Record Technician 16.38

12195 - Medical Transcriptionist 15.16

12210 - Nuclear Medicine Technologist 32.67

12221 - Nursing Assistant I 10.55

12222 - Nursing Assistant II 11.85

12223 - Nursing Assistant III 12.94

12224 - Nursing Assistant IV 14.52

12235 - Optical Dispenser 12.88

12236 - Optical Technician 12.77

12250 - Pharmacy Technician 15.21

12280 - Phlebotomist 13.20

12305 - Radiologic Technologist 25.52

12311 - Registered Nurse I 24.19

12312 - Registered Nurse II 29.61

12313 - Registered Nurse II, Specialist 29.61

12314 - Registered Nurse III 35.83

12315 - Registered Nurse III, Anesthetist 35.83

12316 - Registered Nurse IV 42.91

12317 - Scheduler (Drug and Alcohol Testing) 20.76

12320 - Substance Abuse Treatment Counselor 21.97

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 17.97

13012 - Exhibits Specialist II 22.28

13013 - Exhibits Specialist III 27.25

13041 - Illustrator I 17.97

13042 - Illustrator II 22.28

13043 - Illustrator III 27.25

13047 - Librarian 24.66

13050 - Library Aide/Clerk 11.36

13054 - Library Information Technology Systems Administrator 22.26

13058 - Library Technician 14.76

13061 - Media Specialist I 16.08

13062 - Media Specialist II 17.97

13063 - Media Specialist III 20.05

13071 - Photographer I 14.63

13072 - Photographer II 17.19

13073 - Photographer III 20.25

13074 - Photographer IV 24.78

13075 - Photographer V 29.99

13090 - Technical Order Library Clerk 15.74

13110 - Video Teleconference Technician 16.10

14000 - Information Technology Occupations

14041 - Computer Operator I 13.98

14042 - Computer Operator II 15.64

14043 - Computer Operator III 19.48

14044 - Computer Operator IV 21.63

14045 - Computer Operator V 23.96

14071 - Computer Programmer I (see 1) 22.18

14072 - Computer Programmer II (see 1) 27.50

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 13.98

14160 - Personal Computer Support Technician 21.63

14170 - System Support Specialist 19.55

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 27.98

15020 - Aircrew Training Devices Instructor (Rated) 34.92

15030 - Air Crew Training Devices Instructor (Pilot) 40.76

15050 - Computer Based Training Specialist / Instructor 27.98

15060 - Educational Technologist 29.08

15070 - Flight Instructor (Pilot) 40.76

15080 - Graphic Artist 19.64

15085 - Maintenance Test Pilot, Fixed, Jet/Prop 40.76

15086 - Maintenance Test Pilot, Rotary Wing 40.76

15088 - Non-Maintenance Test/Co-Pilot 40.76

15090 - Technical Instructor 18.16

15095 - Technical Instructor/Course Developer 22.23

15110 - Test Proctor 17.77

15120 - Tutor 17.77

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 8.94

16030 - Counter Attendant 8.94

16040 - Dry Cleaner 10.21

16070 - Finisher, Flatwork, Machine 8.94

16090 - Presser, Hand 8.94

16110 - Presser, Machine, Drycleaning 8.94

16130 - Presser, Machine, Shirts 8.94

16160 - Presser, Machine, Wearing Apparel, Laundry 8.94

16190 - Sewing Machine Operator 10.65

16220 - Tailor 11.06

16250 - Washer, Machine 9.45

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 18.42

19040 - Tool And Die Maker 24.37

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 14.57

21030 - Material Coordinator 19.53

21040 - Material Expediter 19.53

21050 - Material Handling Laborer 10.50

21071 - Order Filler 11.03

21080 - Production Line Worker (Food Processing) 14.57

21110 - Shipping Packer 13.41

21130 - Shipping/Receiving Clerk 13.41

21140 - Store Worker I 9.80

21150 - Stock Clerk 13.79

21210 - Tools And Parts Attendant 14.57

21410 - Warehouse Specialist 14.57

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 27.64

23019 - Aircraft Logs and Records Technician 20.59

23021 - Aircraft Mechanic I 26.08

23022 - Aircraft Mechanic II 27.64

23023 - Aircraft Mechanic III 29.18

23040 - Aircraft Mechanic Helper 18.38

23050 - Aircraft, Painter 23.74

23060 - Aircraft Servicer 20.59

23070 - Aircraft Survival Flight Equipment Technician 23.74

23080 - Aircraft Worker 22.07

23091 - Aircrew Life Support Equipment (ALSE) Mechanic I 22.07

23092 - Aircrew Life Support Equipment (ALSE) Mechanic II 26.08

23110 - Appliance Mechanic 18.42

23120 - Bicycle Repairer 14.19

23125 - Cable Splicer 24.94

23130 - Carpenter, Maintenance 16.96

23140 - Carpet Layer 17.21

23160 - Electrician, Maintenance 22.13

23181 - Electronics Technician Maintenance I 20.54

23182 - Electronics Technician Maintenance II 21.99

23183 - Electronics Technician Maintenance III 23.51

23260 - Fabric Worker 15.98

23290 - Fire Alarm System Mechanic 19.23

23310 - Fire Extinguisher Repairer 14.84

23311 - Fuel Distribution System Mechanic 20.04

23312 - Fuel Distribution System Operator 15.79

23370 - General Maintenance Worker 15.84

23380 - Ground Support Equipment Mechanic 26.08

23381 - Ground Support Equipment Servicer 20.59

23382 - Ground Support Equipment Worker 22.07

23391 - Gunsmith I 14.84

23392 - Gunsmith II 17.21

23393 - Gunsmith III 19.70

23410 - Heating, Ventilation And Air-Conditioning 20.04

Mechanic

23411 - Heating, Ventilation And Air Contditioning 21.30

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 21.16

23440 - Heavy Equipment Operator 19.24

23460 - Instrument Mechanic 19.70

23465 - Laboratory/Shelter Mechanic 18.42

23470 - Laborer 11.40

23510 - Locksmith 18.42

23530 - Machinery Maintenance Mechanic 19.76

23550 - Machinist, Maintenance 19.62

23580 - Maintenance Trades Helper 13.75

23591 - Metrology Technician I 19.70

23592 - Metrology Technician II 20.94

23593 - Metrology Technician III 22.15

23640 - Millwright 19.70

23710 - Office Appliance Repairer 18.42

23760 - Painter, Maintenance 16.96

23790 - Pipefitter, Maintenance 19.58

23810 - Plumber, Maintenance 18.87

23820 - Pneudraulic Systems Mechanic 19.70

23850 - Rigger 19.70

23870 - Scale Mechanic 17.21

23890 - Sheet-Metal Worker, Maintenance 19.70

23910 - Small Engine Mechanic 17.21

23931 - Telecommunications Mechanic I 21.58

23932 - Telecommunications Mechanic II 22.94

23950 - Telephone Lineman 21.32

23960 - Welder, Combination, Maintenance 19.24

23965 - Well Driller 20.50

23970 - Woodcraft Worker 19.70

23980 - Woodworker 14.84

24000 - Personal Needs Occupations

24550 - Case Manager 10.79

24570 - Child Care Attendant 8.64

24580 - Child Care Center Clerk 12.97

24610 - Chore Aide 8.06

24620 - Family Readiness And Support Services 10.79

Coordinator

24630 - Homemaker 15.93

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 19.70

25040 - Sewage Plant Operator 18.33

25070 - Stationary Engineer 19.70

25190 - Ventilation Equipment Tender 13.71

25210 - Water Treatment Plant Operator 18.33

27000 - Protective Service Occupations

27004 - Alarm Monitor 15.35

27007 - Baggage Inspector 12.58

27008 - Corrections Officer 17.16

27010 - Court Security Officer 19.36

27030 - Detection Dog Handler 15.74

27040 - Detention Officer 17.16

27070 - Firefighter 20.08

27101 - Guard I 12.58

27102 - Guard II 15.74

27131 - Police Officer I 23.04

27132 - Police Officer II 25.57

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 11.81

28042 - Carnival Equipment Repairer 11.47

28043 - Carnival Worker 8.68

28210 - Gate Attendant/Gate Tender 13.63

28310 - Lifeguard 12.14

28350 - Park Attendant (Aide) 15.25

28510 - Recreation Aide/Health Facility Attendant 11.12

28515 - Recreation Specialist 16.72

28630 - Sports Official 12.14

28690 - Swimming Pool Operator 14.82

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 18.39

29020 - Hatch Tender 18.39

29030 - Line Handler 18.39

29041 - Stevedore I 17.07

29042 - Stevedore II 19.69

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 37.52

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.87

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.49

30021 - Archeological Technician I 16.30

30022 - Archeological Technician II 18.22

30023 - Archeological Technician III 22.58

30030 - Cartographic Technician 22.58

30040 - Civil Engineering Technician 21.39

30051 - Cryogenic Technician I 21.59

30052 - Cryogenic Technician II 23.85

30061 - Drafter/CAD Operator I 16.30

30062 - Drafter/CAD Operator II 18.22

30063 - Drafter/CAD Operator III 20.71

30064 - Drafter/CAD Operator IV 25.13

30081 - Engineering Technician I 15.07

30082 - Engineering Technician II 16.90

30083 - Engineering Technician III 18.91

30084 - Engineering Technician IV 23.43

30085 - Engineering Technician V 28.66

30086 - Engineering Technician VI 34.67

30090 - Environmental Technician 21.53

30095 - Evidence Control Specialist 19.49

30210 - Laboratory Technician 20.09

30221 - Latent Fingerprint Technician I 21.59

30222 - Latent Fingerprint Technician II 23.85

30240 - Mathematical Technician 22.58

30361 - Paralegal/Legal Assistant I 16.90

30362 - Paralegal/Legal Assistant II 19.95

30363 - Paralegal/Legal Assistant III 24.84

30364 - Paralegal/Legal Assistant IV 29.73

30375 - Petroleum Supply Specialist 23.85

30390 - Photo-Optics Technician 22.58

30395 - Radiation Control Technician 23.85

30461 - Technical Writer I 21.64

30462 - Technical Writer II 26.45

30463 - Technical Writer III 32.01

30491 - Unexploded Ordnance (UXO) Technician I 23.85

30492 - Unexploded Ordnance (UXO) Technician II 28.85

30493 - Unexploded Ordnance (UXO) Technician III 34.58

30494 - Unexploded (UXO) Safety Escort 23.85

30495 - Unexploded (UXO) Sweep Personnel 23.85

30501 - Weather Forecaster I 25.13

30502 - Weather Forecaster II 30.57

30620 - Weather Observer, Combined Upper Air Or Surface Programs (see 2) 20.71

30621 - Weather Observer, Senior (see 2) 22.58

31000 - Transportation/Mobile Equipment Operation Occupations

31010 - Airplane Pilot 28.85

31020 - Bus Aide 12.01

31030 - Bus Driver 17.05

31043 - Driver Courier 11.91

31260 - Parking and Lot Attendant 9.85

31290 - Shuttle Bus Driver 12.89

31310 - Taxi Driver 10.53

31361 - Truckdriver, Light 12.89

31362 - Truckdriver, Medium 15.45

31363 - Truckdriver, Heavy 18.21

31364 - Truckdriver, Tractor-Trailer 18.21

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist 14.07

99030 - Cashier 8.93

99050 - Desk Clerk 11.45

99095 - Embalmer 24.07

99130 - Flight Follower 23.85

99251 - Laboratory Animal Caretaker I 11.39

99252 - Laboratory Animal Caretaker II 12.33

99260 - Marketing Analyst 23.85

99310 - Mortician 24.07

99410 - Pest Controller 16.05

99510 - Photofinishing Worker 12.53

99710 - Recycling Laborer 14.23

99711 - Recycling Specialist 17.31

99730 - Refuse Collector 12.73

99810 - Sales Clerk 11.55

99820 - School Crossing Guard 9.65

99830 - Survey Party Chief 15.96

99831 - Surveying Aide 11.11

99832 - Surveying Technician 15.24

99840 - Vending Machine Attendant 12.60

99841 - Vending Machine Repairer 15.80

99842 - Vending Machine Repairer Helper 12.60

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after

January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and

4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in

29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541. 400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29

C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and

Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the

Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of

Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard

Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See

29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a

Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S. Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).

STATEMENT OF WORK

FOR

2017 PREVENTATIVE MAINTENANCE OF AIR COOLED CHILLERS

FEBRUARY 2017

PREPARED BY:

17TH CIVIL ENGINEER SQUADRON (AETC)

460 E. KEARNEY BOULEVARD

GOODFELLOW AFB, TX 76908-4104

BLANK PAGE

TABLE OF CONTENTS

PART 1 – SCOPE OF WORK:

1.1 GENERAL:

1.2 PROJECT DESCRIPTION:

1.3 LOCATION:

1.4 WORK AND MECHANICS:

1.5 WORKING CONDITIONS:

1.6 PHASING REQUIREMENTS:

1.7 SAFETY:

1.8 SITE MAINTENANCE AND CLEANUP:

1.9 REFERENCES:

1.10 SUBMITTALS:

1.11 WARRANTY:

1.12 DELIVERY, STORAGE, AND PARKING:

1.13 UTILITY OUTAGES AND SPECIAL CONDITIONS:

1.14 DISPOSAL:

PART 2 – ENVIRONMENTAL REQUIREMENTS:

2.1 COMPLIANCE WITH LAWS:

2.2 PROTECTION OF HISTORICAL AND ARCHAEOLOGICAL RESOURCES:

2.3 HAZARDOUS AND SPECIAL WASTES GENERATED BY THE CONTRACTOR:

2.4 CONTRACTOR ENCOUNTERED HAZARDOUS WASTE:

2.5 ASBESTOS:

2.6 HAZARDOUS MATERIALS:

2.7 NUISANCE AND POLLUTING ACTIVITY PROHIBITED:

2.8 RELEASE OF FLUIDS TO THE SANITARY SEWER SYSTEM:

2.9 AIR EMISSIONS:

2.10 CONSTRUCTION WASTE MANAGEMENT:

2.11 ENVIRONMENTAL MANAGEMENT SYSTEM:

2.12 GREEN PURCHASING:

PART 3 – PRODUCTS:

3.1 REFERENCES TO MATERIALS, MANUFACTURERS, AND PRODUCTS:

3.2 GOVERNMENT FURNISHED EQUIPMENT (GFE):

3.3 CONTRACTOR PROVIDED MATERIALS (CPM):

PART 4 – EXECUTION:

4.1 GENERAL:

4.2 CHILLER PREVENTATIVE MAINTENANCE TO BE PERFORMED:

4.3 CONTRACTOR QUALITY CONTROL (DAILY) REPORTS:

4.4 COMPLETION OF WORK:

ATTACHMENT 1: AF FORM 66

ATTACHMENT 2: RECOVERED MATERIALS DETERMINATION

PART 1 – SCOPE OF WORK:

1.1 GENERAL: The work to be performed under this contract and in accordance with this

Statement of Work (SOW) shall consist of furnishing all necessary plant, labor, tools, transportation, supplies, supervision, equipment, materials, and incidentals necessary for providing all work described in this SOW, and all applicable codes, regulations, standards, and criteria in effect at the date of solicitation. This work shall consist of, but not be limited to the following:

Perform preventative maintenance on air cooled chillers.

1.2 PROJECT DESCRIPTION: The Contractor shall perform preventative maintenance on twenty eight (28) air cooled chillers located at buildings 140(2), 222, 259, 316, 356, 409, 430, 448, 501, 520, 526, 530(2), 709, 723(2), 901, 910, 920, 927, 3126, 3135, 3139, 3220, 3311, 3511 and 3454.

A site visit will be conducted so the Contractor can field verify chiller model/serial numbers needed for the work to be performed. The Contractor shall also repair any damage to the facility caused during the course of the project.

1.3 LOCATION: Goodfellow Air Force Base is located in Tom Green County, on the southeast side of San Angelo, Texas and is bounded to the north by Highway #388 (Paint Rock Rd.), to the west by Fort McKavitt Rd and Bell Street/Christoval Road, to the south by South Chadbourne St

(Hwy. 1223) and to the east by the eastern city limits.

1.4 WORK AND MECHANICS: The work for this project shall be executed in the best and most workmanlike manner, by qualified NESHAP trained and certified efficient mechanics/tradesmen, skilled in their respective trades. Only certified journeymen in each respective trade, or apprentices under the direct supervision of certified journeymen, shall be permitted to install and/or supervise installation for this project. Individual trade work for this project shall be performed and quality maintained by the applicable trade only. The Contractor shall assure that all trades coordinate their work with that of other trades. The Contractor shall coordinate and perform all operations in a manner that will result in a professional and expeditiously completed project. The work shall be in strict accordance with prevailing industry standards and manufacturer’s instructions. Work and materials shall comply with this SOW and the editions in effect at the time of this solicitation for all applicable criteria, regulations, guidelines, and codes, all of which are made a part thereof.

1.5 WORKING CONDITIONS: The Contractor shall have sixty (60) calendar days to perform all work after signing the Notice to Proceed (NTP). All Contractor operated/owned vehicles, equipment, tools, etc., shall be stored as prescribed in paragraph DELIVERY, STORAGE, AND

PARKING (1.12). Applicable traffic control signage where required by the contract shall remain overnight. Parking on turf shall not be permitted without prior approval by the Government.

1.5.1 Work Schedule: Working hours for the Contractor will normally be between the hours of

7:30 a.m. and 4:30 p.m. excluding Saturdays, Sundays, Federal Holidays, and AETC Family Days.

AETC Family Days for calendar year 2017:

26 May 17; 3 Jul 17; 1 Sep 17; 24 Nov 17; and 26 Dec 17

AETC Family Days for calendar year 2018:

25 May 18; 5 Jul 18; 31 Aug 18; 23 Nov 18; 24 Dec 18 and 31 Dec 18

The work to be performed on this project will include work in an occupied facility. The Contractor shall coordinate the work of all activities whereby both the Government and the Contractor can continue operations with the least possible interference and inconvenience. The Contractor shall conduct all work such that means of facility ingress and egress are maintained at all times. The

Contractor shall be responsible for providing suitable, approved signs, barricades, roped barriers, etc., to warn occupants of hazardous areas at the job site for the duration of the contract at no additional cost to the Government. The Contractor shall submit their work schedule request to the

Contracting Officer in writing fourteen (14) calendar days in advance for base approval. If personnel are reasonably available, the Contracting Officer may authorize the Contractor to perform work during periods other than normal duty hours/days. If such work is required

Contractor shall submit request in writing to Contracting Officer a minimum of 72 hours in advance for Government approval.

1.5.2 WORK AREA ACCESS: Government personnel escorts are not needed for this SOW.

Contractor shall coordinate with the Project Manager for access to work areas.

1.6 PHASING REQUIREMENTS: A phasing plan will not be needed for this project.

1.7 SAFETY: All Contractor operations shall be conducted and performed in accordance with

Department of Labor, OSHA requirements found in Title 29 Volume 5 Subtitle B Chapter XVII

1910.120 Hazardous Waste Operations and Emergency Response and Air Force Occupational

Safety & Health (AFOSH) AFOSH standards including 91-25. The Contractor shall also ensure that all work is performed in accordance with project identified EPA, national standards, military manuals, instructions, pamphlets, standards, and handbooks, and with the latest edition in effect on the date of this solicitation of the Corps of Engineers (COE) Safety Manual 385-1-1. All job sites are subject to inspections by the Government, Department of Labor, and State of Texas. In the event of conflicts between the OSHA standards and these requirements, the most stringent shall apply.

1.7.1 All companies who conduct business within the State of Texas must, in accordance with

Texas Worker’s Compensation laws (Texas House Bill 62), have an approved company safety policy and an Accident Prevention Plan. The plan, approved by the Texas Worker’s Compensation

Commission (TWCC), shall be submitted For Information Only (FIO) in accordance with paragraph, SUBMITTALS (1.11). In addition to meeting the TWCC requirements; the plan must also include the requirements of COE Safety Manual 385-1-1.

1.7.2 Resolution of Department of Labor citations for violations of Occupational Safety and Health

Standards is a Contractor responsibility and shall provide for no basis of a claim against the

Government.

1.8 SITE MAINTENANCE AND CLEANUP:

1.8.1 SITE MAINTENANCE: The Contractor shall protect adjacent property, buildings and their contents from dust, dirt or other materials. Work areas shall be maintained in a neat, clean, and safe condition and shall, at a minimum, be cleaned at the end of each shift. All streets and roadways in/or adjacent to the site shall remain free of project generated trash and debris at all times.

1.8.2 DAILY CLEANING: The Contractor shall keep the site free from debris at all times and shall perform daily cleaning of all areas.

1.8.3 CLEANUP: The Contractor shall collect any and all trash, debris, refuse, garbage, etc., that is generated and place it in appropriate containers with lids or approved covers on a periodic basis or as directed by the Contracting Officer. The aforementioned materials shall be hauled from the site by appropriate means on a daily basis, unless otherwise approved by the Contracting Officer.

Disposal shall be outside the limits of Government property. Disposal shall be by sanitary landfill or other approved methods and shall conform to all local, state, and federal guidelines, EPA criteria, and regulations. Upon completion of the work, the Contractor shall leave the work site and storage area(s) in a clean, neat, and workmanlike condition satisfactory to the Government.

1.9 REFERENCES: All publications listed herein shall be the most current editions in effect at the time of solicitation and form a part of this Statement of Work. The publications are referred to in the text by basic designation only and include the following:

Applicable Government Criteria and Standards:

American Society for Testing and Materials (ASTM)

ASTM B1-01 Hard-Drawn Copper Wire

ASTM B8 Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

ASTM D 1654 Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments

Code of Federal Regulations (CFR)

Title 16 Volume 2 Part 1000-1799 Consumer Product Safety Commission

Title 29 Volume 5 Chapter XVII Subtitle B 1910.120 Hazardous Waste Operations and

Emergency Response

Title 29 Volume 17 Chapter XVII Subtitle B 1910.252 Welding Cutting and Brazing

Title 40 Volume 9 Part 61, National Emissions Standard for Hazardous Air Pollutants

Title 40 Volume 18 Part 82 Protection of Stratospheric Ozone

Title 40 Volume 22 Part 117 Determination of Reportable Quantities for Hazardous Substances

Title 40 Volume 22 Part 122 EPA Administered Permit Programs: The National Pollutant

Discharge Elimination System

Title 40 Volume 24, Part 170 Worker Protection Standard

Title 40 Volume 25 Part 247, Comprehensive Procurement Guideline for Products containing

Recovered Material

Title 40 Volumes 26 and 27, Parts 260 - 282 Solid Waste Regulations

Title 40 Volume 28, Part 302 Designation, Reportable Quantities, and Notification

NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)

Federal Specifications (FS)

FS FF-N-105B Nails, Brads, Staples and Spikes: Wire, Cut and Wrought

Resource Conservation and Recovery Act of 1976, as amended

Executive Order 1369 Mar 2015

Environmental Protection Agency Publication (EPA)

EPA Publication No. SW-846 Test Methods for Evaluating Solid Waste

Environmental Laws

Archaeological and Historic Preservation Act (AHPA)

Archaeological Resources Protection Act (ARPA)

Clean Air Act (CAA) and all amendments

Clean Water Act (CWA) as amended

Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA)

Endangered Species Act (ESA)

Emergency Planning and Community Right-To-Know Act (EPCRA)

Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA) as amended

Federal Water Pollution Control Act (FWPCA)

National Oil and Hazardous Substances Contingency Plan (NCP)

Occupational Health and Safety Act (OSHA)

Oil Pollution Act (OPA)

Pollution Prevention Act (PPA)

Resources Conservation and Recovery Act (RCRA)

Safe Drinking Water Act (SDWA), as amended

State Regulations (Texas Administrative Code)

25 TAC 295 Occupational Health

30 TAC 205 General Permit to Discharge Waste

30 TAC 290 Public Drinking Water

30 TAC 335 Industrial Solid Waste and Municipal Hazardous Waste

AFOSH 91-5 Welding, Cutting, and Brazing

Corps of Engineers (COE) Safety Manual 385-1-1

Air Force Instruction 32-7086 Hazardous Materials Management

Air Force Instruction 32-7001 Environmental Management

Air Force Instruction 32-7040 Air Quality Compliance and Resource Management

DOD Installations or Facilities – Standard Operating Procedure (SOP) – Contractor

Hazardous Material Usage

The Resource Conservation and Recovery Act (RCRA), Section 6002 (42 U.S.C. 6962)

Executive Order (EO) 13693, Executive Order -- Planning for Federal Sustainability in the

Next Decade Energy Policy Act (EPACT)

The Farm Security and Rural Investment Act (FSRIA)

NFPA-101, Life Safety Code

NFPA-70E, Standard for Electrical Safety in the Workplace

GAFB Instruction 32-2001 Base Fire Protection Program

Texas Worker’s Compensation laws (Texas House Bill 62)

1.10 SUBMITTALS: The Contractor shall provide submittals in the form of manufacturer’s data, certificates of compliance, and reports for all items provided per the attached AF Form 66. The

Contractor will not be permitted to perform any work on site without approved submittals. The submittals listed on the attached AF Form 66 shall be required and shall be submitted for

Government Approved (GA) or For Information Only (FIO). Use AF Form 3000 to process submittals. Submit four copies of submittals to Contracting Officer.

1.11 WARRANTY: The Contractor shall identify all items being installed that are guaranteed or under warranty for more than a one-year period, and provide validated copies of the manufacturer’s warranty. All warranty information shall be filed by the Contractor in the Government’s name.

All warranties shall be identified by product with a listing of the name and address of the company and the expiration date of the guarantee or warranty.

1.12 DELIVERY, STORAGE AND PARKING: All equipment delivered and stored shall be protected from the weather, humidity and temperature variation, dirt and dust, and any other contaminants.

1.12.1 CONTRACTOR PARKING & STORAGE: The Contractor shall submit a material and equipment storage area and for contractor parking layout for Government approval.

1.12.2 STORAGE AREAS: The Contractor shall not work or store materials in a manner that would hinder or otherwise block pedestrian circulation to exit corridors and exit doors in the event of an emergency or fire. If space allows, materials may be stored at the job site as coordinated with and approved by the Contracting Officer. Otherwise, materials shall be stored off Government property until ready for installation at no additional cost to the Government. In instances where on site storage is not available, the Contractor shall be responsible for storing and preparing materials in the manner specified herein, or by the manufacturer’s instructions, so that materials are properly suited for installation. Off-site acclimatization of materials shall be at no additional cost to the Government. All project storage areas shall be kept free of debris, leaks, stains, or splashes and kept in a neat, clean, and safe condition. Any contamination of the storage area by a hazardous substance shall be immediately remediated by the Contractor, in accordance with PART

2.0 below at no additional expense to the Government.

1.13 UTILITY OUTAGES AND SPECIAL CONDITIONS: All utility outages must be coordinated through CE no later than fourteen (14) days. If the outage affects mission the outage shall be performed by the contractor during non-duty hours and at no additional cost to the

Government. The Contractor shall notify 17th Civil Engineer Squadron Service Call (654-3436) of outage requirements to include buildings affected, length of outage and reasons for the outage.

The Contractor is also required to provide the Contracting Officer a written notification of the requested outage.

1.13.1 PERMITS:

1.13.2 BASE CIVIL ENGINEER WORK CLEARANCE REQUEST: The Contractor shall obtain and process AF Form 103 for approval prior to commencement of work for this project. Due to the requirement for multiple agencies to coordinate on digging permit requests, it takes approximately 14 days for processing of the paperwork. Contractor requests should be submitted at the earliest possible date to preclude delays.

1.13.3 UTILITIES CONSERVATION: The Contractor shall instruct employees in utilities conservation practices. The Contractor shall be responsible for operating under conditions that preclude the waste of utilities, which shall include: Lights shall be used only in areas where and when work is actually being performed. Water faucets or valves shall be turned off after the required usage has been accomplished. The Contractor shall not abuse the use of base telephones.

Telephones shall be used for contract related issues only. The Contractor shall use good judgment in the conservation of Government utilities. Prevailing energy conservation practices shall be adhered to and enforced by the Contractor.

1.13.4 BASE FIRE REGULATIONS: The Contractor shall comply with Base Fire Regulations as set forth in the latest edition of GAFB Instruction 32-2001, titled “Base Fire Protection

Program”. The Contractor shall use no explosives in performing the work. All work shall be in strict compliance with NFPA-101.

1.13.5 WELDING, CUTTING AND BRAZING: The Contractor shall contact 17 CES/CEFP (Fire

Prevention) for a complete inspection of all welding, cutting, and brazing operations prior to any operation. The Contractor shall provide an appropriate size and operable fire extinguishers.

Contractor shall comply with Title 29 Volume 17 Chapter XVII Subtitle B 1910.252 Welding

Cutting and Brazing and Corps of Engineers (COE) Safety Manual 385-1-1, and AFOSH 91-5

Welding, Cutting, and Brazing. An AF Form 592 USAF Welding, Cutting and Brazing permit will be issued prior to any operation and shall be kept on site until completion of operation or permit expires. Contact Fire Prevention at (325) 654-3532/33/34 for issuance of permit.

1.14 DISPOSAL: Items to be included in the disposal shall consist of but not limited to the careful removal and disposition of materials. The Contractor shall recycle or divert wastes from landfill disposal to the maximum extent practicable. The Contractor shall track recycling and waste disposal and submit the report on the provided Waste Management Form for Government

Approval at the end of the project, and prior to final acceptance of the work. The Contractor shall, before commencement of any work, carefully survey the existing site to determine the extent of the work. The Contractor shall be responsible for the proper disposal of all materials meeting all rules pertaining to disposal.