RFQ FA301627Q7012 IDMT Critical Care Trainining Official Release.docx
DOCX document 37 KB Posted
- Solicitation number
- FA301627Q7012
About this file
This is a Request for Quote (RFQ) issued by the 502d Contracting Squadron at Joint Base San Antonio (JBSA) on behalf of the Department of the Air Force Air Education and Training Command. The RFQ seeks qualified vendors to provide high-fidelity, hands-on procedural skills training courses using cadavers for U.S. Air Force Independent Duty Medical Technicians (IDMTs). The training is intended to develop critical care competencies through realistic, cadaver-based instruction.
The solicitation documentation includes a Statement of Need, course schedule, applicable clauses and provisions, and a schedule of supplies to guide vendor responses. Interested contractors should submit quotes in accordance with the terms outlined in the RFQ package. The procurement appears to be a competitive solicitation without an identified set-aside, and vendors are expected to meet the specified course delivery requirements and training standards established for IDMT critical care instruction. Detailed response requirements, pricing terms, and award timelines are contained within the complete RFQ documentation provided by the contracting squadron.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 4 Clauses and Provisons Official Release.pdf | ||
| Attachment 1 Statement of Need Official Release.pdf | ||
| Attachment 3 Course Schedule Official Release.docx | DOCX document | |
| Attachment 2 Schedule of Supplies Official Release.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Request for Quote (RFQ)
502 CONS
IDMT Critical Care Course Training
1. This is a solicitation for commercial products prepared in accordance with (IAW) the format in RFO FAR Subpart 12.201-1, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is being issued as Request for Quotation (RFQ) No. FA301627Q7012.
2. The solicitation documents and incorporated provisions and clauses (Atch No. 4) are those in effect through Federal Acquisition Circular FAC 2026-01, effective 13 March 2026 and DFARS Publication Notice 20260702 effective 02 July 2026.
3. The set-aside for this solicitation is full and open competition.
4. See the attached Schedule of Supplies (Atch No. 2) for applicable contract line items (CLINS), description of requirement, and quantities.
5. See the attached Schedule of Supplies (Atch No. 2), Course Schedule (Atch No.3), and Statement of Need (Atch No. 1) for further information on the requirements.
6. Training location must not exceed 30 miles from JBSA Fort Sam, San Antonio TX.
7. The RFO FAR provision 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition. Reference the addenda statements below to this provision.
ADDENDUM to RFO FAR 52.212-1
Addendum to RFO FAR 52.212-1(a), Submission of offers. This paragraph replaces as follows:
To assure timely and equitable evaluation of quotations, quoters must follow the instructions contained herein. Quoters are required to meet all solicitation requirements, including all terms and conditions of the RFQ, representations and certifications, and technical requirements, in addition to those identified as evaluation factors. Failure to meet a requirement may result in a quotation being ineligible for award.
Quoters must clearly identify any exceptions to the solicitation terms and conditions and provide complete accompanying rationale.
Quoters shall submit the following items:
a. Price: Quoters are required to complete and return the attached Schedule of Supplies (Atch No. 2) or to provide a quote on company letterhead which must provide the following information, as listed in the Schedule of Supplies (Atch No. 2): Descriptions, Unit Prices and Total Prices. The Government intends to award based on initial responses, therefore, you are encouraged to offer your most advantageous pricing to include discounts, in the initial response.
b. Technical Specifications – Quotations must be complete, self-sufficient, and respond directly to the requirements of this solicitation. The quotation shall demonstrate the contractor’s ability to provide a recurring, one day, high fidelity procedural skills class in accordance with the Statement of Need (Attachment 1).
c. The quotation submittal shall be clear, concise and include sufficient detail for effective evaluation and for substantiation of the validity of stated claims.
d. Amendments (if applicable) – vendors shall acknowledge all amendments in writing with the quotation submittal.
e. Completed Representation and Certifications
Addendum to FAR 52.212-1(d), Contract award. This paragraph is tailored as follows:
The Government intends to evaluate offers and award a contract without discussions with Offerors. Therefore, the Offeror’s initial offer should contain the Offeror’s best terms. However, the Government reserves the right to hold interchanges (using Interchange Notices {INs}) if, during the evaluation, it is determined to be in the best interest of the Government. Interchanges, IAW RFO FAR 16.507-2 Fair opportunity procedures, are fluid interaction(s) between the Contracting Officer (CO) and the quoters that may address any aspect of the quote and may or may not be documented in real time. Interchanges may be conducted with one, some or all quoters as the Government is not required to conduct interchanges with any and/or all quoters responding to this solicitation.
8. The RFO FAR provision 52.212-2, Evaluation - Commercial Items, applies to this acquisition. Reference the addendum statements below to this provision.
ADDENDUM to RFO FAR 52.212-2
If three (3) or fewer quotes are received, the Government will evaluate all quotes for technical acceptability. If more than three (3) quotes are received, the Government will evaluate the three(3) lowest priced quotes for Technical Acceptability. If the Government determines none of the three lowest-priced quotes are technically acceptable, the Government will evaluate additional quotes in order of increasing price until one is determined technically acceptable. The agency will reject and not consider for award any quote found technically unacceptable and ineligible for award under the terms of this RFQ.
*NOTE: Best value will be based on a Lowest Price Technically Acceptable (LPTA) approach. For this RFQ, best value means a single award shall be made to the quoter whose product is technically acceptable and quotes the lowest total evaluated price. The following two (2) factors shall be used to evaluate quote(s): Technical and Price.
a. Technical (Conformance to the Schedule of Supplies). The technical response shall demonstrate compliance by providing a recurring, one day, high fidelity procedural skills class within 30 miles of JBSA Fort Sam Houston, as specified in the attached Statement of Need (Atch 1) and Schedule of Supplies (Atch 2). The Technical Factor shall be rated acceptable or unacceptable as follows:
Adjectival Rating Description
| Acceptable |
| Quote provides sufficient information to demonstrate the ability to provide a recurring, one day, high fidelity procedural skills class within 30 miles of JBSA Fort Sam Houston, as specified in the attached Statement of Need (Atch 1) and Schedule of Supplies (Atch 2). |
| Unacceptable |
| Quote does not provide sufficient information to demonstrate the ability to provide a recurring, one day, high fidelity procedural skills class within 30 miles of JBSA Fort Sam Houston, as specified in the attached Statement of Need (Atch 1) and Schedule of Supplies (Atch 2). |
b. Total Evaluated Price Factor. Vendors are required to complete and return the attached Schedule of Supplies (Atch 2) and/or to provide a quote on official company letterhead with the information as outlined in the Statement of Need (Atch 1) and Schedule of Supplies (Atch 2). The Government will evaluate quotations for award purposes by adding the extended price (quantities multiplied by unit prices) for each line item to obtain total evaluated price. The Government intends to award based on initial responses, therefore, you are encouraged to offer your most advantageous pricing to include discounts, in the initial response.
If you have any questions, please contact Jamilah Holmes at jamilah.holmes@us.af.mil or Shyla Harris at shyla.harris@us.af.mil.
9. Quoter(s) is(are) required to include a completed copy of all provisions (i.e. 52.212-3, Offeror Representations and Certifications - Commercial Products and Commercial Services), with their quotation.
10. The FAR clause at 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services, applies to this acquisition.
11. The FAR clause at 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Products and Commercial Services, applies to this acquisition. All FAR clauses cited in this clause are applicable to the acquisition.
12. Quotes shall be submitted electronically to Jamilah Holmes, Contract Specialist, at jamilah.holmes@us.af.mil and Contracting Officer, Shyla Harris, shyla.harris@us.af.mil via email. The complete quotation package is due 23 November 2026 at 4:00 P.M. Central Standard Time (CST). All questions and/or requests for information must be submitted no later than 19 November 2026 at 12:00 P.M. CST.
13. Notice to Vendor(s): The Government reserves the right to cancel this solicitation, either before or after the closing date of receipt of quotations. In the event the Government cancels this solicitation, the Government has no obligation to reimburse the vendor for any costs.
Four (4) Attachments:
1. Statement of Need Official Release
2. Schedule of Supplies Official Release
3. Course Schedule Official Release
4. Clauses and Provisions Official release
File details come from the government source that posted it. Updated .