Statement of need male mannequin Revision 2.pdf

STATEMENT OF NEED/WORK: Male Radiographic Mannequin

1. Introduction:

One (1) RS-601TA Male Radiographic Mannequins – BRAND NAME OR EQUAL - is needed at the Medical Education and Training Campus located at Ft Sam Houston and will be used for the Radiology Training Course.

2. Background

The male radiographic mannequin is used for demonstration of positioning and obtaining live exposures during the laboratory practicum training portion of the Radiology course. This requirement is required to meet lesson objectives outlined in the curriculum.

3. Minimum Requirements / Specifications/ Salient Characteristics:

Must be brand new. Must be able to demonstrate Gastrointestinal and Genitourinary systems clearly in an x-ray image. Must be able to be posed into the required positions to represent the anatomy.

Nomenclature: Male Radiographic Mannequin

Model No: RS-601TA

Performance/Operating Conditions: The male radiographic mannequin will be used to provide adequate training while using live x-ray exposure to obtain images of the body as well as assisting student to be able to perform the required positioning of a patient to obtain those views. It is a curriculum requirement.

• Height: 5'1" (156 cm)

• Weight: 105 lbs (48 kg)

Skin Tone Selection: Light tone the preferred skin tone for this procurement.

4. DELIVERY TERMS: Delivery shall be at DHA Medical Education & Training Campus METC Logistics & Facilities Division 2220 Wheelright Street, Building 4194-E JBSA Fort Sam Houston, TX 78234 and be completed in accordance with the manufacturers’ commercial schedule, estimated to be within sixteen (16) to eighteen (18) weeks from date of award. Please ensure the shipping cost is either included in your overall cost or provided in a separate Line Item on your quote

5. TRAINING: No, should not include initial onsite training for staff.

6) DOCUMENTATION: The contractor shall provide one (1) copy of owner’s manuals for each of the mannequins. Documentation shall be provided in English in hard copy.

7) INSTALLATION: NO. There is not installation required for the mannequins. No assembly is required once unboxed.

8) MAINTENANCE SERVICE: There is no maintenance or service provided for the mannequin.

9) WARRANTY: For a period of two (2) years from the date of purchase, if this Product is determined to be defective.

10) INSPECTION AND ACCEPTANCE: In addition to the inspection and acceptance terms articulated in Federal Acquisition Regulation 52.212-4, the Government reserves the right to perform such performance tests and evaluations as defined below to verify specified system performance. Such tests and evaluations, if performed, shall be conducted within the environment that the system is to be operated. The Contractor has the right to be present during the tests and evaluations, if performed, at the Contractor’s expense.