Questions and Answers for RFQ FA301624Q5110.docx
DOCX document 26 KB Posted
- Attached to
- Building 1623 Furniture
- Solicitation number
- FA301624Q5110
About this file
This document is a Questions and Answers (Q&A) file related to Request for Quotation (RFQ) #FA301624Q5110 for Building 1623 Furniture. The RFQ is being issued by the Department of the Air Force Air Education and Training Command and is requesting the manufacture, delivery, and installation of 12 benching stations, 2 four-person cubicles, and 4 laminate modular storage cabinets.
The Q&A document provides responses to several questions, including the acceptability of 42-inch high partition panels, use of base-feed whips, junction boxes, table desks with partial modesty panels, floor dimensions, staging areas, and removal of existing furniture. Specific responses indicate that 42-inch high partition panels are acceptable, base-feed whips can be used, no junction boxes are required, table desks with partial modesty panels are acceptable, the passage width can be 50 inches, and all existing furniture must be removed and disposed of by the contractor.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Amendment 0002.pdf | ||
| RFQ - Building 1623.pdf | ||
| Amendment 0001.pdf | ||
| RFQ - Building 1623.pdf | ||
| Attachment 1 - B1623 Statement of Work.pdf | ||
| Attachment 2 - B1623 Selected Layout.pdf | ||
| Attachment 3 - Base Pass Blank Form.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers for RFQ #FA301624Q5110
1. For the 12 Each 2'x6' Benching Stations -Are 42" H partition panels acceptable?
YES, as long as visibility is not impeded to wall monitors.
-Is it acceptable to quote for 1 Base-Feed Whip for each of the (3) Rows of 4 workstations
YES
--(3) Junction boxes located on the wall of Building at top of Dwg Layout? NO
-If no no partition panels required, Are 2' x 6' Table Desks with Partial Modesty Panels acceptable (with Daisy Chained Power Modules)? YES
2. Are we able to get a building first floor plane for install quoting purpose? YES
As shown on the image below, the dimensions of the passage way towards the center of the cubicle we can get it to 50" or 30". I am assuming that 30" is to narrow so I used the 50" instead. Is this acceptable? YES
Also, is there a storage/staging area for the furniture prior to installation? NO
Is the room going to be on the ground? If above ground, is there a service elevator to help carry the parts of the furniture? AREA IS ON THE GROUND FLOOR.
For the removal of old furniture, can you please identify them so to help us estimate? ALL EXISTING FURNITURE WLL NEED TO BE REMOVED AND DISPOSED OF.
In addition to that, is there a dumpster that the contractor could facilitate for the removal services? NO image1.png
File details come from the government source that posted it. Updated .