STATEMENT_OF_WORK_Dynavision_D2.docx

STATEMENT OF WORK

FOR

THE PURCHASE OF DYNAVISION D2

FOR

THE 353 BA TS

BLDG 147

DESCRIPTION OF SERVICES: The contractor shall provide and deliver Dynavision™ D2 to the 353 Battlefield Airmen Training Squadron Headquarters (Forbes Hall), 950 Voyager Drive, B147, JBSA Lackland Training Annex, San Antonio, Texas 78236.

SCOPE OF WORK: The Dynavision™ D2 is a light-training reaction device, developed to train sensory motor integration through the visual system, offering the ability to assess visual and motor reaction to both central and peripheral stimuli, with a capacity to integrate increasing levels of cognitive challenge.

The contractor shall perform work outside and inside the facility as required.

1.3 The following is a list of locations where the Dynavision™ D2 will be installed:

Room 150: New HPO LAB

PERSONNEL

The contractor shall provide supervision that is experienced, fully qualified, and well versed in construction terminology. The supervisor shall maintain direct control and close surveillance of all contract personnel who are performing the work.

WORKING HOURS AND SCHEDULING

3.1 Work will be performed during normal duty business hours: 0700-1630 M-F.

3.2 Work will be done in such as manner as to not interfere with student training. If the contractor believes work will infringe on student training, he will discuss with unit representative (MSgt Denice Prather, (210) 671-6058) to de-conflict.

SECURITY

All workers will be legal U.S. Citizens with legal picture ID’s and able to gain a clearance on to the military installation.

No guns, drugs, or illegal paraphernalia will be allowed on the military installation.

All vehicles, equipment, and containers will be subject to search at any time while on or seeking access to the military installation.

SPECIFIC TASK

GENERAL NARRATION OF WORK: The contractor deliver the Dynavision™ D2 to the aforementioned facility and into rooms identified in paragraph 1.3. The contract will remove from box and assemble units at each location. The contractor will make connections to the electrical power and to the computers. The contractor will troubleshoot the unit to ensure it is operating correctly in the presence of a unit representative. Remove trash from the facility.

PROTECTION OF GOVERNMENT PROPERTY

6.1 The contractor will protect all government and personnel property from damage.

SAFETY:

All OSHA standards will be complied with.

Best practices of safety in the work place will be adhered to at all times.

INSPECTION AND ACCEPTANCE

8.1 When work is complete the unit representative will inspect the work for completion and quality prior to the job being accepted.

8.2 A minimum of a 12 month warranty on all work and parts will be required in writing upon job completion.

FINAL CLEAN UP

Upon completion the contractor will clean up all tools, trash, dirt, and debris.

All unit property will be placed back as it was.