Attachment 3 - Salient Characteristics.docx
DOCX document 23 KB Posted
- Attached to
- 3D Printers for 59 MDW Federal contract opportunity
- Solicitation number
- FA3016
About this file
This solicitation seeks replacement 3D printers meeting detailed technical specifications for the 59th Medical Wing. Requirements include a large format high definition 3D stereolithography printer compatible in dimensions with an existing 3D Systems Viper Si2 SLA System, with maximum dimensions of 58.5 x 38.5 x 76 inches and weight of 1,020 pounds. The printer must operate on 100-240 VAC power and have temperature controls between 64-82 degrees Fahrenheit, utilize a solid state NdYVO4 or better laser with wavelengths of 354.7 nm and curing powers of 100mW or greater. Layer and model detail capabilities, as well as vat size and build envelope, are further specified. The data format must be compatible with .stl and .slc files, and operate on the Windows 10 operating system. The solicitation is issued through the Department of the Air Force Air Education and Training Command as a Request for Quotation numbered FA3016-20-U-0046.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SF30 Amendment No 0001.pdf | ||
| SF30 Amendment No 0001 Official.pdf | ||
| Combined Synopsis Solicitation - Official Release.docx | DOCX document | |
| Combined Synopsis Solicitation.docx | DOCX document | |
| Attachment 2 - Schedule of Supplies.docx | DOCX document | |
| Attachment 1 - Clauses and Provisions.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ESSENTIAL CHARACTERISTICS FOR LARGE FORMAT
HIGH DEFINITION 3D STEREOLIGHOGRAPHY PRINTER
REQUIRED SPECIFICATIONS: Must be able to replace a 3D Systems Viper Si2 SLA System in dimensions and minimum specifications.
Dimensions: Must fit existing unit’s space W52.5 X D33.5 X H70 in. Unit may be 6” larger in any of the three dimensions. Up to W58.5 X D38.5 X H76 in. is acceptable Weight: 1,020 lbs. MAX. Replaces existing machine weight as approved by facility management.
Power Requirements: 100-240 VAC, 50/60 Hz. (15 amp. 115V – 8 amp. 230V). Existing is 15 amp. 115V preferred to avoid facility rewiring.
Operating Temperature Range: 64-82 Degrees Fahrenheit Laser: Solid State NdYVO4 or better; Wavelength: 354.7 nm; Power at vat: 100mW available for curing power Beam Diameter:
Standard Mode: 0.250 mm +/- 0.025 mm (0.010 +/-0.001 in.) or better High Resolution Mode: 0.075 mm +/- 0.015 mm (0.0030 +/-0.0005 in.) or better Build Layer Capability (for creation of high detail/ high accuracy medical models): Minimum: 0.02mm (.0001”) or smaller; Typical: 0.10mm (0.004”) or smaller VAT Capacity: Volume 32.21 L (8.5 U.S. gal). Approximate;
Maximum build envelope:
| Standard Mode: 250 X 250 X250 mm (10 X 10 X10 in.) |
| High resolution Mode: 125 X 125 X250 mm (5 X 5 X10 in.) |
Interchangeable vat: Yes (not absolutely necessary) Input Data Format: .stl, .slc Operating System: Microsoft Windows 10 (upgradeable to latest version) Network type and Protocol: Ethernet, IEEE 802.3 10/100 Base-T or higher System Warranty: One year from installation date to include parts, labor, and system software upgrades
Trade-In Information Manufacturer: 3D Systems Inc.
Model: Viper SI2 Serial NO: 04FB0346
File details come from the government source that posted it. Updated .