Ammended Snow Blade Salient Characteristics.pdf
PDF 85 KB Posted
- Attached to
- Snow Removal Blades
- Solicitation number
- FA286024Q4024
About this file
This document is a Salient Characteristics Sheet that describes the requirements for carbide or ceramic embedded with rubber snow removal blades for seven 20-foot plow heads on an Oshkosh H2723G1 with a Wausau Plow head Model: BMP 2050 at Joint Base Andrews. The blades must fit a 3"x3"x12" hole pattern, have a minimum height of 7 1/2" and width of 2 7/8", and utilize a Standard Highway Punch (SHP) design. The new blades are intended to reduce damage to the airfield concrete and require less frequent changes, improving response times and reducing safety risks.
This salient characteristics sheet is related to a federal contract opportunity, Solicitation Number FA286024Q4024, issued by the Department of the Air Force Headquarters District Washington for 100% small business set-aside carbide snow removal blades. The intent is to purchase enough blades to fully outfit seven 20-foot plow heads, with the new blades required to be Department of Transportation approved for use on the airfield. A member of the 316 Civil Engineering Squadron Horizontal Construction shop will approve the product prior to purchase to ensure technical acceptability.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Snow Blades Salient Characteristics.pdf | ||
| Snow Blades Combine Synopsis Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics Sheet
Describe the requested item(s) in salient terms:
- Carbide or ceramic embedded with rubber Snow Removal Blades for a total of seven 20 ft plow heads.
- Carbide or ceramic embedded with rubber Snow Removal Blade will be utilized on an Oshkosh H2723G1 with a Wausau Plow head Model: BMP 2050 Physical characteristics
- Blades must fit 3"x3"x12" hole pattern with a minimum of 7 1/2" height of blade and 2 7/8th width.
- Blades must utilize Standard Highway Punch (SHP) design.
- Blades will be installed in-house by members of the 316 Civil Engineering Squadron (316 CES) Horizontal Construction shop.
- A total amount of blades to fully outfit seven 20ft plow heads is required.
Essential Characteristics
- The quantity of blades purchased should be enough to cover seven 20-foot plow heads.
- Snow removal blades must be Department of Transportation approved for use on Joint Base Andrew’s Airfield.
- Before the purchase of materials, a member of 316 CES Horizontal Construction shop shall approve the product to ensure accurate hole spacing and correct material for technical acceptability.
Functions to be Performed: The intention is for better material to be utilized for snow removal operations. The new blades will reduce damage to Joint Base Andrews’s airfield concrete and require less blade changes, boosting response times while lessening the manpower required for changes and potential safety concerns.
File details come from the government source that posted it. Updated .