TRD2_Redacted.pdf
PDF 103 KB Posted
- Attached to
- RANGE SECURITY - GATES
- Solicitation number
- FA282325QA033
About this file
This Range Gate Technical Requirements Document outlines a government procurement for 8 sets of new double range gates to be delivered to Duke Field at Eglin Air Force Base in Florida. The technical specifications mandate precise requirements for gate construction, including 12-foot, 0.5-inch long gates fabricated with 2-inch square steel tubing, 7-foot mounting posts with 4-inch diameter circular steel tubing, a 7-foot tieback post with 2.5-inch diameter circular steel tubing, and associated hardware. Each set includes two single range gates, two mounting posts, two top caps, one tieback post, four hinges, and mounting hardware. Additional requirements specify that all gates must be primed and powder coated in Nautical Red with a finish coat of 8-16 mils (200-400 microns). Vendors must schedule delivery with government contacts between 0645 and 1600 hours, providing at least one business day's notice, with specific delivery location and offloading capabilities to be confirmed after contract award.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| DRAWINGS.pdf | ||
| USA000368-25-DPCAP.pdf | ||
| USA000392-25-DPCAP.pdf | ||
| COMBO1 3_Redacted.pdf | ||
| TRD1_Redacted.pdf | ||
| DAF-Contracting-SPE-Delegate--Open-Letter-to-Contractors-21-Mar-25.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Range Gate Technical Requirements Document
1. The Government requests the purchase/delivery of 8 sets of new double range gates. A double range gate configuration spans 25 feet 2 inches in length. A single range gate spans 12 foot, 0.5 inch in length. A range gate set includes quantity 2 single range gates, quantity 2 7 foot 4 inch dimeter steel tube mounting posts, quantity 2 4 inch diameter top caps, quantity 1 7 foot 2.5 inch diameter steel tube tieback post, quantity 4 hinges and and mounting hardware. Deliver range gates to:
. (Duke Field) Eglin AFB, FL. 32542
Government Points of Contact will be provided after the contract is awarded.
2. The vender shall call Government Point(s) of Contact to schedule delivery during the hours of (0645 to 1600) not later than one business day in advance of anticipated delivery. At which time, the Government will provide the exact location for that particular delivery to include offloading capabilities. This is a hard requirement, no exceptions.
3. The Government is requesting 8 sets of new double range gates 12 foot, 0.5 inches long per range gate. The range gate will be fabricated with 2 inch square steel tubing. Use 4 inch diameter round tubing for range gate mounting posts. Use 2.5 inch diameter round tubing for range gate tieback post. See attached range gate specification drawing.
These are the minimal requirements that the Government is willing to accept in order to successfully complete these projected projects within the time and budget that has been allotted.
1. This product must be made of 2 inch square steel. This is a hard requirement, no exceptions.
2. Gates must meet fabrication specification above and indicated in the attached drawing. This is a hard requirement, no exceptions.
3. The range gates will be fabricated with 2 inch square steel tubing. The mounting post will be
4 inch diameter circular steel tubing, 7 feet in length, with a top cap. The tie-back post will be
2.5 inch diameter circular steel tubing, 7 feet in length, with a top cap. The ranges gate will include hinges and mounting hardware. See attached range gate drawing. This is a hard requirement, no exceptions.
4. All should be primed and powder coated, finish coat 8-16 mils (200-400 microns) Nautical
Red
File details come from the government source that posted it. Updated .