Solicitation_-_FA282319QA024.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NO.

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

RFQ IFB RFP

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NAICS:

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

8 (A)

EDWOSB

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

FA282319QA024

Solicitation/Contract Form

Supplies or Services and Prices/Cost

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

0001 Chemisorption and Physiorption Analyzer IAW the Technical Requirements. To include Installation and user familiarization, and shipping.

Purchaser's Item Code: NULL Product Service Code: 6630 Firm Fixed Price

CIN: F1TBAN9136A0010000AA

1.0 Each

Description/Specifications/Statement of Work

Requirements Turnkey dual Chemisorption and Physiorption Analyzer System to include hardware and software options necessary to perform Temperature - Programmed Desorption + Reduction + Oxidation analysis.

Technical Requirements for Chemisorption Physiorption Analyzer

1. The AFRL/RWF has a purchase requirement for a turnkey dual Chemisorption and Physisorption analyzer system. The delivered system shall include all hardware and software components (except gases) necessary to perform Temperature-Programmed Desorption + Reduction + Oxidation analysis.

As a minimum the system shall include the following:

a. System shall be of the Thermal Conductivity Detector (TCD) type. The TCD shall be temperature controlled and insulated to afford low noise, low drift and high signal to noise ratio. The TCD should be capable of having the range and sensitivity adjusted. The signal output should be 0-10 volts with X1 or X10 gain and a resolution of 0.1 mV. (Please include filament material options and costs with quote).

b. Shall include a removable furnace capable of sustained operation at 1100C and compatible with both oxidizing and reducing atmospheres. The furnace system shall include furnaces for both standard pulse chemisorption and TPD/TPR analysis. The furnace controller shall allow programmable linear temperature ramps from 0.5C to 50C per minute. The system shall be capable of controlling the sample temperature between 25C and 1100C.

c. Shall include at least two sample ports in parallel and two high temperature quartz sample tubes. The sample temperature should be monitored in-situ by inert clad thermocouples. Self-sealing sample cell holders are preferred.

d. Shall include syringe injection capability to perform dose sizing. Automatic injection loop capability is also desirable.

e. Shall include at least one consumables spares kit with one additional quartz sample tube, O-rings, filters, etc.

f. Shall include integrated sample cooling. This can be accomplished using either fan forced air or plumbed house air/nitrogen. Sample cooling should be capable of cooling samples from max temperature down to 40C in approximately 30-40 minutes for high throughput analysis.

g. Shall include at least five gas inlets (at least one preparation gas and four carrier gases). Automatic gas switching is preferred. A system that is capable of performing titrations for metal area and dispersion measurements through the use of automatic injector and gas switching is highly desired. A system capable of variable gas flow rate control is not required but preferred.

h. Shall include the following semi-conductor grade, stainless steel diaphragm, dual-stage regulators;

(1 CGA-320 at 30psig for Carbon Dioxide, 1 CGA-540 at 30 psig for Oxygen, 1 CGA-350 at 30 psig for Hydrogen, and 1 CGA-350 at 30 psig for Carbon Monoxide). Each regulator shall include proper sized Swagelok fitting and tubing for connection to the Instrument. (Hookup for House nitrogen or argon will be supplied by the user). The hydrogen regulator should include a hydrogen safety device (excess flow valve).

i. The system must use stainless steel tubing for all wetted gas lines (including exhaust) and manufactured to handle Ammonia (NH3). The system shall be designed to be purged and include mechanisms to prevent backflow of moisture into the systems as a means to minimize corrosion.

j. O-ring and seals should be of a material grade comparable to or better than Viton.

k. Waste gases should be vented through a dedicated exhaust port with fitting for connection to fume hood via Swagelok tubing. The system should include an integrated adsorbent and a cold trap before the TCD with a bypass valve.

l. The system should include the following safety features; pressure relief valve on sample vessel and check valves on gas feed lines.

m. The system shall include analysis software with the ability to perform manual or automatic baseline subtraction, peak integration, peak detection, peak-fitting, peak overlay, peak retention time, integral value, etc. The software should also include the ability to automatically perform the following calculations: Single-point BET surface area... Total pore volume... Langmuir surface area... Active metal area... Average crystal size... Activation energy... Acid/base site quantification... Degree of dispersion... The software should be capable of displaying the following graphically; TCD (mV) versus time, TCD (mV/g) versus time, sample and oven temperatures versus time, TCD (mV) versus temperature, TCD (mV/g) versus temperature, graph for desorption activation energy, overlay function of each graph type.

n. The system shall be designed to allow for upgrading. As a minimum, the system shall include dedicated evolved gas out port and software signal interfaces for connection to an external FTIR, gas chromatography or mass spectrometer instrument. The system being quoted should NOT include the secondary external detection hardware. The system should be designed to allow for connection to a mass spectrometer without the need to have the instrument modified at the factory or in the field.

o. Please include a separate quote for a mass spectrometer add on option: (Mass spec with faraday and electron multiplier detector (300AMU), vacuum system, temperature controlled capillary sample transfer line and software).

p. If factory installation is included, this shall include the following on site (post installation) certification runs as a minimum; (1) Signal to noise baseline with each gas, (2) Temperature programmed desorption using calcium oxalate, (3) active metal area, (4) Single-point BET surface area, (5) Total pore volume,

(6) Langmuir surface area, (7) Active metal area (8) Average crystal size (9) Activation energy, (10) Acid/ base site quantification (11) Degree of dispersion.

q. If the system being quoted does not include factory installation, a factory certification data set shall be supplied along with sufficient reference materials and procedures for each test to be ran by the user on site to verify the system is operating as designed. On site verification should be completed by the User within 45 days of delivery.

r. The system shall be turn key for use in the USA and should be serviced by 110 - 240 VAC and 50/60 Hz line voltage.

s. The system offered shall include as a minimum a one year warranty.

t. The system quoted should include freight charges.

Packaging and Marking

Inspection and Acceptance

0001 Inspection and Acceptance Location

Both Destination Instructions: None

DoDAAC: F1TBAN Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

AFRL RWMF FUZES

306 W EGLIN BLVD BLDG 432

AF BPN NO MILSBILLS PROCESSES

EGLIN AFB, FL 32542 0000

United States

OfficeCode:

Mitchel Bogle Telephone: (850) 882-5600 Email: mitchell.bogle.1@us.af.mil

Deliveries or Performance

Government Destination

0001 Delivery Schedule Ship To Address

Delivery Requested By

19 NOV 2019

1.0 Each

Ship To

DoDAAC: F1TBAN Cage:

DunsNumber:

Duns4Number:

CountryCode: USA

AFRL RWMF FUZES

306 W EGLIN BLVD BLDG 432

AF BPN NO MILSBILLS PROCESSES

EGLIN AFB, FL 32542 0000

United States

OfficeCode:

Mitchel Bogle Telephone: (850) 882-5600 Email: mitchell.bogle.1@us.af.mil

Contract Administration Data

Special Contract Requirements

Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018 52.204-13 System for Award Management Maintenance OCT 2018 52.212-1 Instructions to Offerors - Commercial OCT 2018 52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information OCT 2016 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting OCT 2016 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016 252.209-7998 Representation Regarding Conviction of a Felony Criminal (Class Deviation 2012-O0007) MAY 2019 252.209-7999 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law (Class Deviation 2012-O0004) JAN 2012 252.213-7000 Notice to Prospective Suppliers on the Use of Past Performance Information Retrieval System - Statistical Reporting in Past Performance Evaluations MAR 2018 252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017 252.225-7012 Preference For Certain Domestic Commodities DEC 2017 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DEC 2018 252.232-7010 Levies on Contract Payments DEC 2006 252.239-7017 Notice of Supply Chain Risk FEB 2019 252.239-7018 Supply Chain Risk FEB 2019 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Items JUN 2013

CLAUSES INCORPORATED BY FULL TEXT

ADDENDUM TO FAR 52.212-1 Instructions to Offerors - Commercial Items OCT 2018

*** THIS SECTION IS FOR SOLICITATION PURPOSES ONLY. THIS SECTION WILL BE PHYSICALLY REMOVED FROM

THE RESULTANT AWARD. ***

1. Addendum to 52.212-1(a), NAICS code and small business size standard. The NAICS code is 334516, Analytical Laboratory Instrument Manufacturing and size standard is 1,000 EMP for this requirement.

2. Addendum to 52.212-1-(c), Period for Acceptance of Offers. This paragraph is tailored as follows: "The offeror agrees to hold the prices in its offer firm through 30 September 2019 for receipt of offers."

3. Submit offers electronically to: 2d Lt Yesenia Manzur, yesenia.manzur.1@us.af.mil and David P. Jesmain, David.Jesmain.1@us.af.mil. Offeror shall submit offers electronically, allowing sufficient time for the upload to be completed by the offer submission closing date and time.

3.1. Only electronic versions of offers will be accepted. Paper copies of offers will be rejected and not considered for award.

4. The following instructions prescribe the format for offers, and describes the approach to be used for the development and presentation of offer data. The offer shall include all of the information requested in the specified instructions.

4.1. Offers shall be complete and be organized into the following three (3) separate parts:

a. PART I: Cover Sheet

b. PART II: SF 1449

c. PART III: Technical Capability Documentation

4.2. The content of each part is described below:

a. PART I: Cover Sheet

1. Complete each fill in of the Cover Sheet with your company info.

b. PART II: SF 1449

1. Complete the SF 1449 CLIN 0001 and fill-in 52.213-3 (Addendum) Annual Representations and Certifications statement and any other required fill-ins.

c. PART III: Technical Capability Documentation: Limited to 6 Page(s)

1. Your submitted documentation will be evaluated against the Technical Factors as defined in Addendum 52.212-2.

a. Chemisorption and Physisorption Analyzer system with the technical requirement minimum specifications listed.

b. Warranty

5. Questions shall be emailed to both the Contract Specialist, 2d Lt Yesenia Manzur, yesenia.manzur.1@us.af.mil and the Contracting Officer, David P. Jesmain, david.jesmain.1@us.af.mil by 16 August 2019 at 12:00 PM Central Standard Time

(CST).

6. Offerors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors; failure to meet a requirement of the solicitation may be excluded from consideration. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale; and

7. Documents submitted in response to this solicitation must be fully responsive to and consistent with:

7.1. Requirements of this solicitation, Government standards and regulations;

7.2. Evaluation Factors for Award;

7.3. Format for all offer Parts:

7.3.1. Offers shall be submitted in pdf. Format.

7.3.2. Offer font shall be Times New Roman and no smaller than 12 font size.

8. Addendum to 52.212-1(e), Multiple offers, this paragraph is deleted for this solicitation and marked "reserved".

9. Only electronic versions of offers will be accepted.

10. Addendum to 52.212-1(j), Data Universal Numbering System (DUNS) Number. This paragraph is expanded to include the following statement: "All offers submitted through a Joint Venture shall have an assigned DUNS number for the Joint Venture Entity."

11. Addendum to 52.212-1(k), System for Award Management (SAM). This paragraph is expanded to include the following statement: "All offers submitted through a Joint Venture shall have an active SAM account for the specific Joint Venture Entity.

12. All of the time and date references for receipt of offers in this addendum shall be superseded by any subsequent solicitation amendments that extend the time and date for receipt of offers.

(End of Addendum)

52.212-2 EVALUATION - COMMERCIAL ITEMS OCT 2014

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantegous to the Government, price and others factores considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement and;

(ii) price.

Technical and price, whem combined, are equal.

ADDENDUM TO FAR 52.212-2 - EVALUATION - COMMERCIAL ITEMS (OCT 2014)

*** THIS SECTION IS FOR SOLICITATION PURPOSES ONLY. THIS SECTION WILL BE PHYSICALLY REMOVED FROM

THE RESULTATNT AWARD. ***

1. Methodology. This acquisition will utilize the Lowest Price Technically Acceptable (LPTA) approach, in which, the Government intends to award to an offeror with a technically acceptable quote at the lowest overall total evaluated price.

The LPTA approach does not permit tradeoffs between price/cost and past performance, and will include an evaluation for technical acceptability.

2. Relative Importance. The Government's evaluation will be based on the following factors and sub-factors:

a. Factor 1 - Price

b. Factor 2 - Technical Acceptability Price and Technical are equal when evaluated.

3. Offers which are unrealistic in terms of technical acceptability or price may be rejected at any time during the evaluation process. The Government reserves the right to make an award without discussions; however, discussions may be conducted with all, some, or none of the offerors. Offerors may be required to participate in telephone discussions at AFTC Installation Contracting Division/PZIOAD, 308 West D Av. Eglin AFB, FL 32542.

4. The Government intends to award a Firm-Fixed Price (FFP) Contract as a result of this solicitation.

5. Offerors are cautioned to follow the detailed instructions in the Addendum to 52.212-1 and Addendum to 52.212-2 fully, as the Government reserves the right to make an award based on initial offers received, without discussion of such offers.

a. Price Evaluation. The first (1st) step will be evaluating prices and listing all responsive offers by price from lowest to highest. Offeror's prices submitted in the Offer Schedule will be evaluated for completeness and fair and reasonableness. All offerors will be evaluated based on price and placed in order from lowest to highest price. To determine the lowest price, the total proposed price for CLIN 0001 will be used.

b. Technical Evaluation. Offers shall be evaluated independently of the cost/price quote evaluation to determine the offerors' compliance with the technical requirements of this solicitation. The Government may make a final determination as to the rating of an offer based on the quote as submitted without requesting any further information. The technical factor will receive an overall rating of either "Acceptable" or " Unacceptable" using the rating description in Table 1 below. The Government's technical evaluation team shall evaluate the technical quote on a pass/fail basis, assigning one of the ratings described below for any sub-factor. Any sub factor evaluated as "Unacceptable" will render the entire quote "Unacceptable"; therefore, un-awardable. Only those quotes determined to be technically "Acceptable", either initially or as a result of discussions, will be considered for award. However, the offeror is cautioned that the Government reserves the right to award this effort based on the initial quote, as received, without discussion. Evaluators shall assign a rating, which fails within one of the following ranges according to the degree to which the offeror meets the minimum requirements described below in Table 1.

Table 1. Technical Ratings

Rating Description

ACCEPTABLE Quote meets the requirements of the solicitation. The offeror's documentation clearly demonstrates their capability and understanding of all aspects of performance in accordance with the product specifications.

UNACCEPTABLE Quote does not meet the requirements of the solicitation. The offeror's documentation does not clearly demonstrate their capability and understanding of all aspects of performance in accordance with the product specifications.

The technical factors will be rated ACCEPTABLE when the offeror's documentation clearly demonstrates their capability to accommodate all aspects of performance in accordance with the product specifications and the technical sub-factors listed below:

Sub-Factor 1: Technical Requirements - The offeror's submitted documentation clearly demonstrates they have the ability to provide a chemisorption and physisorption analyzer with the following specifications as minimum:

a. System shall be of the Thermal Conductivity Detector (TCD) type. The TCD shall be temperature controlled and insulated to afford low noise, low drift and high signal to noise ratio. The TCD should be capable of having the range and sensitivity adjusted. The signal output should be 0-10 volts with X1 or X10 gain and a resolution of 0.1 mV. (Please include filament material options and costs with quote).

b. Shall include a removable furnace capable of sustained operation at 1100C and compatible with both oxidizing and reducing atmospheres. The furnace system shall include furnaces for both standard pulse chemisorption and TPD/TPR analysis. The furnace controller shall allow programmable linear temperature ramps from 0.5C to 50C per minute. The system shall be capable of controlling the sample temperature between 25C and 1100C.

c. Shall include at least two sample ports in parallel and two high temperature quartz sample tubes. The sample temperature should be monitored in-situ by inert clad thermocouples. Self-sealing sample cell holders are preferred.

d. Shall include syringe injection capability to perform dose sizing. Automatic injection loop capability is also desirable.

e. Shall include at least one consumables spares kit with one additional quartz sample tube, O-rings, filters, etc.

f. Shall include integrated sample cooling. This can be accomplished using either fan forced air or plumbed house air/ nitrogen. Sample cooling should be capable of cooling samples from max temperature down to 40C in approximately 30-40 minutes for high throughput analysis.

g. Shall include at least five gas inlets (at least one preparation gas and four carrier gases). Automatic gas switching is preferred. A system that is capable of performing titrations for metal area and dispersion measurements through the use of automatic injector and gas switching is highly desired. A system capable of variable gas flow rate control is not required but preferred.

h. Shall include the following semi-conductor grade, stainless steel diaphragm, dual-stage regulators; (1 CGA-320 at 30psig for Carbon Dioxide, 1 CGA-540 at 30 psig for Oxygen, 1 CGA-350 at 30 psig for Hydrogen, and 1 CGA-350 at 30 psig for Carbon Monoxide). Each regulator shall include proper sized Swagelok fitting and tubing for connection to the Instrument.

(Hookup for House nitrogen or argon will be supplied by the user). The hydrogen regulator should include a hydrogen safety device (excess flow valve).

i. The system must use stainless steel tubing for all wetted gas lines (including exhaust) and manufactured to handle Ammonia (NH3). The system shall be designed to be purged and include mechanisms to prevent backflow of moisture into the systems as a means to minimize corrosion.

j. O-ring and seals should be of a material grade comparable to or better than Viton.

k. Waste gases should be vented through a dedicated exhaust port with fitting for connection to fume hood via Swagelok tubing. The system should include an integrated adsorbent and a cold trap before the TCD with a bypass valve.

l. The system should include the following safety features; pressure relief valve on sample vessel and check valves on gas feed lines.

m. The system shall include analysis software with the ability to perform manual or automatic baseline subtraction, peak integration, peak detection, peak-fitting, peak overlay, peak retention time, integral value, etc. The software should also include the ability to automatically perform the following calculations: Single-point BET surface area... Total pore volume...

Langmuir surface area... Active metal area... Average crystal size... Activation energy... Acid/base site quantification...

Degree of dispersion... The software should be capable of displaying the following graphically; TCD (mV) versus time, TCD (mV/g) versus time, sample and oven temperatures versus time, TCD (mV) versus temperature, TCD (mV/g) versus temperature, graph for desorption activation energy, overlay function of each graph type.

n. The system shall be designed to allow for upgrading. As a minimum, the system shall include dedicated evolved gas out port and software signal interfaces for connection to an external FTIR, gas chromatography or mass spectrometer instrument.

The system being quoted should NOT include the secondary external detection hardware. The system should be designed to allow for connection to a mass spectrometer without the need to have the instrument modified at the factory or in the field.

o. Please include a separate quote for a mass spectrometer add on option: (Mass spec with faraday and electron multiplier detector (300AMU), vacuum system, temperature controlled capillary sample transfer line and software).

p. If factory installation is included, this shall include the following on site (post installation) certification runs as a minimum;

(1) Signal to noise baseline with each gas, (2) Temperature programmed desorption using calcium oxalate, (3) active metal area, (4) Single-point BET surface area, (5) Total pore volume, (6) Langmuir surface area, (7) Active metal area (8) Average crystal size (9) Activation energy, (10) Acid/base site quantification (11) Degree of dispersion.

q. If the system being quoted does not include factory installation, a factory certification data set shall be supplied along with sufficient reference materials and procedures for each test to be ran by the user on site to verify the system is operating as designed. On site verification should be completed by the User within 45 days of delivery.

r. The system shall be turn key for use in the USA and should be serviced by 110 - 240 VAC and 50/60 Hz line voltage.

s. The system quoted should include freight charges.

Sub-Factor 2: Warranty - The system offered shall include as a minimum a one year warranty.

The technical factor will be rated UNACCEPTABLE when the offeror's documentation does not clearly demonstrate their capability to provide the required items in accordance with the product specifications and delivery schedule.

6. Basis for Contract Award. By submission of its quote, the offeror accedes to all solicitation requirements, including terms and conditions, representations and certifications. The Government intends to award a contract to the offeror deemed responsible in accordance with FAR 9.104, as supplemented, whose quote conforms to the Request for Quote(RFQ) requirements including all stated terms, conditions, representations, certifications, and all other information required by the RFQ and is judged, based on the evaluation criteria, to represent the best value to the Government. The Government intends to award one contract to the offeror whose technically acceptable quote is the lowest priced of those quotes received.

(END OF ADDENDUM)

ADDENDUM TO FAR 52.212-3 - OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS (NOV 2017)

1. Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b) (2) of this provision do not automatically change the representations and certifications posted on SAM website (sam.gov).

2. The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.sam.gov/portal/SAM/#1. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs __________. [Offeror to identify the applicable paragraphs at (c) through (q) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(END OF ADDENDUM)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--

COMMERCIAL ITEMS MAY 2019

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C.

4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved] ___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

___ (10) [Reserved] ___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

___ (ii) Alternate I (Nov 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (ii) Alternate I (Jan 2011) of 52.219-4.

___ (13) [Reserved] ___ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).

___ (ii) Alternate I (Nov 2011).

___ (iii) Alternate II (Nov 2011).

___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Aug 2018) (15 U.S.C. 637 (d)(4)).

___ (ii) Alternate I (Nov 2016) of 52.219-9.

___ (iii) Alternate II (Nov 2016) of 52.219-9.

___ (iv) Alternate III (Nov 2016) of 52.219-9.

___ (v) Alternate IV (Aug 2018) of 52.219-9.

___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

___ (19) 52.219-14, Limitations on Subcontracting (Jan 2017) (15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages--Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657f).

_X_ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).

___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

_X_ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

_X_ (26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

_X_ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (28) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

___ (ii) Alternate I (Feb 1999) of 52.222-26.

___ (29) (i) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

___ (ii) Alternate I (July 2014) of 52.222-35.

_X_ (30) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

___ (ii) Alternate I (July 2014) of 52.222-36.

___ (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

_X_ (33) (i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).

___ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O.13693).

___ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

___ (38) (i) 52.223-13, Acquisition of EPEAT(r) -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514 ___ (ii) Alternate I (Oct 2015) of 52.223-13.

___ (39) (i) 52.223-14, Acquisition of EPEAT(r) -Registered Television (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

___ (41) (i) 52.223-16, Acquisition of EPEAT(r) -Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

_X_ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513).

___ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

___ (44) 52.223-21, Foams (Jun 2016) (E.O. 13696).

___ (45) (i) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

___ (ii) Alternate I (Jan 2017) of 52.224-3.

___ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

_X_ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C.

3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

___ (ii) Alternate I (May 2014) of 52.225-3.

___ (iii) Alternate II (May 2014) of 52.225-3.

___ (iv) Alternate III (May 2014) of 52.225-3.

___ (48) 52.225-5, Trade Agreements (Aug 2018) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_ (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

___ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

___ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

___ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505), 10 U.S.C. 2307(f)).

___ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

_X_ (55) 52.232-33, Payment by Electronic Funds Transfer--System for Award Management (Oct 2018) (31 U.S.C. 3332).

___ (56) 52.232-34, Payment by Electronic Funds Transfer--Other Than System for Award Management (Jul 2013) (31 U.S.C. 3332).

___ (57) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

___ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

___ (59) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

___ (60) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

___ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

___ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495) ___ (2) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67.).

___ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C.206 and 41 U.S.C. chapter 67).

___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67).

___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-- Requirements (May 2014) (41 U.S.C. chapter 67).

___ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

___ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

___ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause--

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Jan 2019) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2019) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) (A) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. chapter 78 and E.O. 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-- Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xviii) 52.222-62, Paid sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of Clause)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://farsite.hill.af.mil/ (End of clause)

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause- Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/ iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory…