Questions_and_Answers.pdf

Questions and Answers:

1) Is there an existing supplier for this requirement?

a. No there is not an existing supplier for this requirement. The technical requirements where however derived from a “like unit” currently installed on a sister system.

2) Is there an existing form factor? Is a drawing available of the configuration you’re looking for?

a. No form factor is necessary. No drawing is necessary. Just be sure stay within the footprint and weight specifications called out in the TRD.

3) Is this a airborne requirement?

a. No it is not an airborne requirement.

4) Is the optic mirror/s GFE?

a. Yes the optic is a GFE.

5) Does the weight specification include the controller?

a. No the weight specification is only for the 2-axis motorized gimbal mount (excluding optic)

6) Are the two axis of rotation El/Az or ??

a. No, the two axis of rotation are for pitch and yaw.

7) Is there an acceleration requirement?

a. Yes, apologies for not including it. Min. acceleration requirement is 375deg/sec^2 with 20lb payload. Load distribution is uniformly distributed across the 9” mirror cell.

8) Is this a pointing or a tracking requirement?

a. This is a pointing system. It will be told to move to a positon at a given rate.

9) What quantity are you looking for?

a. Quantity of 1.