SS_Att_1_EOD_Robot_Specs_v2.xlsx

15 KB Posted

Attached to
EOD Robotic Platform and Attachments
Solicitation number
FA2823-17-R-4000
Issued by

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1 MINIMUM GOVERNMENT SPECIFICATIONS: INTERESTED VENDOR ____________________________

SPECIFICATIONS AND / OR COMMENTS:

· Platform dimensions MUST NOT exceed the following:
o Maximum weight of 13,000 lbs without attachments or other modifications;
o Maximum overall height of 85 inches with boom in stowed position;
o Maximum width of 63 inches with outriggers in the fully up position; and
o Maximum length of 170 inches with boom in stowed position.
· Maximum sound level no greater than 100db;
· Water-cooled diesel fueled engine rated at a minimum of 90 hp;
· 24 Volts DC electrical system with a 110 Volts AC accessory line at end of boom;
· Platform must operate independently from any umbilical, cable, leash or other tethered means.
· Must be propelled on continuous tracks system:
o Continuous tracks must be a minimum of 12 inches wide and constructed of rubber-based material with no exposed metal surface;
o Must be capable of a transit speed range with a minimum of 1.5 mph and a maximum of 2.5 mph while on hard pack dirt; and
o Must be capable of traversing soft sand and climbing/departure angle of 30 degrees.
· Must have four (4) hydraulically activated outriggers to aid stability;
· Platform MUST meet the following minimum hydraulic system requirements:
o System capacity of 34 Gallons
· Platform must have a minimum 3,000 psi to end of boom hydraulic lines to provide hydraulic power to tool attachments
· Platform must have two sets of independently controlled auxiliary hydraulic lines with quick disconnect fittings at boom end
MINIMUM PERFORMANCE SPECIFICATIONS:
· Platform must have a single boom meeting the following minimum requirements:
o Capable of rotating 360 degrees with outriggers fully extended to support the chassis;
o Capable of lifting a 1,200 lb load at full boom extension and 5,000 lb load within 5 feet of chassis;
o Capable of reaching downward to 13.5 feet to facilitate excavator operations; and
o Must be capable of powering work tool attachments by providing a standard hydraulic flow rate of at least 30 gallon per minute.
· The platform must be interoperable with the following work tool attachments in order to perform the required functions:
o Minimum of an 8 cubic foot excavation bucket;
o Hydraulic concrete breaker capable of reaching 1,000 blows per minute at least 770 foot pounds;
o Hydraulic metal shears with:
§ Minimum jaw opening of 9 inches,
§ Capable of rotating 360 degrees, and
§ Capable of cutting through 2 inches of solid round steel.
o Multi-purpose grapple capable of the following:
§ Moving a 2,000 lb load for 50 meters,
§ Must have a minimum opening range of at least 55 inches, and
§ Must have a minimum load capacity of 2,204 lb.
o Two hydraulically powered manipulator arms. Arms will be mounted on a releasable hitch at end of boom work tool attachment point and connected to platform’s hydraulic system. These arms:
§ Must have a lift capacity of at least 200 lbs at full extension ,
Must have a gripper on each arm capable of rotating 360 degrees and the gripper must be capable of applying at least 100 foot lbs in clockwise/counterclockwise direction, and the gripper must be able to grip 3/4 inch diameter T-handles
§ Must receive hydraulic and electrical power by platform,
§ Must be mounted 36 inches apart, shoulder to shoulder,
§ Must have 6 axis of articulation plus gripper,
ADDITIONAL REQUIREMENTS:
· Platform must be capable of integrating the existing Government owned Esteem radio package (model number 195ED-2) working on 902.928 MHZ frequency to provide 1-2 mile remote Radio Frequency (RF) operation. The Government will provide the radio package to the contractor for installation of the Government owned radio package.
· Platform must be capable of integrating Government owned video cameras. The Government will provide the cameras to the contractor upon contract award. The Government will provide the installation quantities and placement of the cameras in any subsequently issued solicitation . The contractor shall install the Government owned cameras. The contractor shall provide and include all necessary installation components such as: cables, mounts, brackets, control enclosures, and other parts as necessary to complete installation.
· The contractor shall coordinate and provide initial operation and maintenance training to the Government at contractor facilities and follow-on training session(s) at Eglin AFB, FL. The number of Government personnel to be trained and additional training detail requirements will be provided in any subsequently issued solicitation.

EOD Robot Specifications Sources Sought Notice, Attachment 1

&P

File details come from the government source that posted it. Updated .