Salient Characteristics for 7 Workbenches.pdf

PDF 178 KB Posted

Attached to
Workstation Benches - Sources Sought
Solicitation number
FA2816A071674
Issued by

About this file

This document is a salient characteristics specification for heavy-duty, mobile, Electrostatic Discharge (ESD) protective workstations with integrated storage, power distribution, and cable management. The procurement requires a specific combination of mobile benches: three units at 90 inches wide, two units at 66 inches wide, and two units at 84 inches wide, all at a restrictive 24-inch depth and 30-inch height. This dimensional configuration is legally mandated by physical footprint restrictions of a new imaging section and is non-negotiable.

All workstations must feature 100% fully arc-welded heavy-duty steel frames in Industrial Safety Blue (RAL 5017) or equivalent, shipped completely assembled from the factory floor. Each unit requires four heavy-duty total-lock stem casters (minimum 4-inch diameter) that simultaneously lock both swivel and wheel rotation, a pre-engineered 3-tier open-frame architecture with clear shelving levels for heat dissipation, and minimum 1.125-inch thick High-Pressure Laminate (HPL) ESD-safe top panels. Worksurfaces must comply with ANSI/ESD S20.20 and MIL-STD standards to discharge 5,000 volts in less than 0.01 seconds. Each bench includes integrated cable management systems, Panduit cable management assemblies, industrial-grade power strips with surge protection (ranging from 16 to 24 outlets depending on size), angled shelving assemblies, storage bins, and pencil lips for containment. All items from the work surface downward, including drawers, cabinets, keyboards, and CPU holders, must be pre-installed; only upper accessories such as shelves, upper cabinets, and monitor mounts require field installation. Shipping is included in the vendor's proposal.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Salient Characteristics: Heavy-Duty ESD Mobile Workstations

General Description The vendor shall provide heavy-duty, mobile, Electrostatic Discharge (ESD) protective workstations with integrated storage, power distribution, and cable management.

Dimensional Constraint Non-Negotiability: The combination of exactly 90”W, (QTY 3) 66”W (QTY 2), and 84”W (QTY 2) units at a restrictive 24” depth is legally mandated by the physical footprint restrictions of the new imaging section.

Finish: Industrial powder coating, Standard Safety Blue (RAL 5017) or equivalent.

Color: Black or equivalent neutral dark color.

Fully Welded Unified Structural Frame: Benches must feature a 100% fully arc-welded heavy-duty steel frame shipped completely assembled from the factory floor. Multi-tier configurations holding dozens of live laptops, heavy-duty network deployment carts, and infrastructure equipment create immense static and dynamic weight. Equipped with four

(4) heavy-duty, total-lock stem casters (minimum 4" diameter) that simultaneously lock both the swivel and wheel rotation.

Pre-Engineered 3-Tier Vertical Egress Open-Frame Architecture: The benches must provide 3 completely clear, open-shelf levels entirely engineered for unimpeded heat dissipation.

Integrated Multi-Tier Ergonomic Reach Depth: Shelving tiers must be geometrically optimized at a 24” workbench depth.

Worksurface Composition: Minimum 1.125” thick High-Pressure Laminate (HPL) ESD-safe top panel matching the nominal footprint. (Minimum 1.125” thickness)

Continuous Grounding ESD Matrix: Worksurfaces must feature a continuous static-dissipative ESD top complying with ANSI/ESD S20.20 and MIL-STD compliance to safely discharge 5,000 volts in less than 0.01 seconds, protecting unconfigured internal components from permanent electrostatic destruction.

Assembly: Ship fully welded and assembled. Preinstall all items from the work surface and below, prior to shipping. This includes drawers, cabinets, keyboards, CPU holders and other miscellaneous items. The only items that will need to be installed will be any upper accessories such as shelves, upper cabinets, power strips, bin rails and monitor mounts.

Shipping: Included

Assembled, 90W x 24D x 30H Details: ESD Worksurface, Total-lock Casters, HD Frame, Blue (QTY 2)

Core Structure & Frame components

• FRAME ASSY HYD LEGB 2.0 SQ x 89.0 x 23.0 x 23.5 blue or equivalent o Characteristics: Heavy-duty welded steel hydraulic leg base frame assembly; minimum 2.0-inch square tubing; dimensional footprint of approximately 89"W x 23"D x 23.5"H; powder-coated finish in blue or approved equivalent; must support integrated height-adjustment mechanisms and heavy-weight capacities. (QTY 1 FOR EACH BENCH)

• Powder = blue or equivalent o Characteristics: Industrial-grade powder coat finish applied to all raw steel components; color matched to standard industrial blue or approved equivalent; must provide high impact, scratch, and chemical resistance.

(QTY 1 FOR EACH BENCH)

• WELD SPDR 16GA x 2.0 SQ x 85.0 o Characteristics: Welded structural frame spreader; constructed from minimum 16-gauge steel; 2.0-inch square profile; nominal length of 85.0 inches; provides lateral stability and structural rigidity to the base frame.

Note: Mount lower spreader at center location (QTY 1 FOR EACH BENCH)

• FRAME WITH REAR SPREADER

o Characteristics: Requires additional rear structural cross-spreader;

maximizes heavy-duty weight distribution and prevents frame racking or twisting under maximum load. (QTY 1 FOR EACH BENCH)

• BOLT SH SPDR x 16GA x 2.0SQ x 84.875 blue or equivalent o Characteristics: Bolt-on structural shelf spreader bar; constructed from minimum 16-gauge steel; 2.0-inch square profile; exact length of 84.875 inches; powder-coated blue or equivalent; includes pre-drilled hardware mounting provisions. (QTY 1 FOR EACH BENCH)

• FRAME WITH EXACT WS HEIGHT

o Characteristics: Factory frame engineered to ensure an exact fixed or finalized worksurface height of 30 inches from the floor (including casters/glides). (QTY 1 FOR EACH BENCH)

• Bench Size to match space footprint 90W x 24D x 30H o Characteristics: Complete dimensional adaptation configuration;

guarantees the fully assembled workbench envelope measures exactly 90" Width x 24" Depth x 30" (QTY 1 FOR EACH BENCH)

Worksurface & ESD Protection

• TOP PNL 1.13 x 90.0 x 24.0 ESD HPL BLK o Characteristics: Electrostatic Dissipative (ESD) High-Pressure Laminate

(HPL) industrial tabletop panel; minimum thickness of 1.13"; overall outer boundary dimensions of 90.0"W x 24.0"D; non-reflective black finish;

engineered to safely dissipate static electrical charges away from sensitive electronic assemblies. Must meet ANSI/ESD S20.20 standards for static dissipation. (QTY 1 FOR EACH BENCH)

• ESD worksurface grounding kit - FULL w/ rectangle hub, lug & straps o Characteristics: Complete single-point ESD grounding hardware system;

includes a low-profile rectangular terminal distribution hub, secure connection lugs, and adjustable operator wrist straps with static-dissipative cords; must provide continuous ground paths conforming to ANSI/ESD S20.20 standards. (QTY 1 FOR EACH BENCH)

Mobility & Mounting Hardware

• Caster Total Lock 4 x 1.25 Blk, 1/2-13 x 1" stm location.

o Characteristics: Heavy-duty, industrial-grade total-lock swivel casters; 4" wheel diameter with a 1.25" tread width; non-marking black polyurethane wheels; threaded stem mounting configuration utilizing a 1/2"-13 x 1" stem;

features dual-action total-lock braking mechanisms that simultaneously freeze both wheel rotation and swivel tracking. (QTY 4 FOR EACH BENCH)

• 1/2"-13 ASTM A563 Grade A Zinc Finish Steel Jam Nut o Characteristics: Hexagonal locking low-profile jam nuts; threaded to 1/2"-13 specifications; manufactured in strict compliance with ASTM A563 Grade A structural steel standards; corrosion-resistant clear zinc electroplated finish;

utilized to lock mobile casters rigidly to the primary leg housing. (QTY 1 FOR

EACH BENCH)

• HARDWARE KIT FOR HD BENCH D51108-1 (Used for: UNISTRUTS) o Characteristics: Complete specialized fast installation hardware kit matching specification code D51108-1; contains all spring nuts, channel bolts, washers, and anchoring hardware optimized specifically for securing structural Unistrut components. (QTY 1 FOR EACH BENCH)

• STANDARD HARDWARE KIT (D44753-2) (Used for: UNISTRUT ACCESSORIES) o Characteristics: Complete specialized fast installation hardware kit matching specification code D44753-2; contains all accessories for 12” or 15” shelves, power rails, bin rails, monitor rails, and static monitor mounts.

(QTY 4 FOR EACH BENCH)

• L CLIP 1-1/8X1-1/4X1-1/4, 13 GA L-ANGLE

o Characteristics: Right-angle structural mounting bracket ("L-Clip");

fabricated from thick 13-gauge structural steel; nominal dimension profile of 1-1/8" x 1-1/4" x 1-1/4"; pre-punched bolt holes for structural framing joins.

(QTY 4 FOR EACH BENCH)

• UNISTRUT BAR 12GA x 1.63 x 60.0 TRAF (Blue or equivalent) o Characteristics: Heavy-wall commercial Unistrut mounting channel; 12-gauge structural roll-formed profile steel channel; measuring 1.63" x 1.63" structural profile and 60.0" in continuous linear length; Traffic Blue color-finish; serves as a universal anchor backbone for structural accessories.

(QTY 2 FOR EACH BENCH)

• Unistrut cap - White o Characteristics: Safety end caps for structural strut rails; impact-resistant white polymer plastic; designed to friction-fit snugly over standard raw-cut Unistrut profile ends to eliminate exposed sharp edge hazards. (QTY 2 FOR

EACH BENCH)

Cable & Power Management

• PANDUIT CBL MGMT 72.0 ASSY

o Characteristics: High-density Panduit-brand or equivalent vertical/horizontal cable management pathway assembly; nominal length of

72.0 inches; provides enclosed, neat routing routes for high-volume power and data cabling. (QTY 1 FOR EACH BENCH)

• POWER STRIP 24-PLG, 15FT cord 120V/15A W/SURGE PROTECTION o Characteristics: Industrial-grade power distribution strip; overall cross-section of approx. 2.31" x 3.0" with a continuous 72.0-inch length; features 24 NEMA 5-15R electrical outlets; rated for 120V / 15-Amp service; features integrated heavy-duty surge protection and a minimum 15-foot heavy-gauge power cord. (QTY 2 FOR EACH BENCH)

• POWER STRIP ASSY 1.5 x 82 blue or equivalent o Characteristics: Task-rail integrated electrical power strip assembly; ultra-slim 1.5-inch profile with an 82-inch length; powder-coated blue or equivalent; optimized for tool/accessory power directly over the workspace.

(QTY 2 FOR EACH BENCH)

Shelving, Bin Rails, & Accessories

• ANGLED SHELF FRM ASSY 82 x 15 x 6.0 blue or equivalent o Characteristics: Ergonomic angled upper-shelf steel frame assembly;

overall dimensions 82"W x 15"D with a 6.0" rear lip/rise height; powder-coated blue or equivalent; designed to present bins or parts at a user-friendly forward tilt. (QTY 2 FOR EACH BENCH)

• STD SHELF 0.75 x 89.75 x 15.0 LPL BLK o Characteristics: Low-Pressure Laminate (LPL) standard utility shelf panel;

0.75-inch thickness; exact dimensions 89.75"W x 15.0"D; black finish;

impact-resistant edges. (QTY 2 FOR EACH BENCH)

• STD lower/upper shelf 0.75 x 89.75 x 18.0 LPL BLK o Characteristics: Extended flat storage shelf board; 0.75" core thickness;

expanded surface area dimensions of 89.75"W x 18.0"D; black Low-Pressure Laminate (LPL) finish. (QTY 1 FOR EACH BENCH)

• BIN RAIL ASSY 14 GA x 82 x 0.87 x 2.25 blue or equivalent o Characteristics: Heavy-duty parts bin hanging rail assembly; formed from rigid 14-gauge steel; overall dimensions 82"W x 0.87"D x 2.25"H; powder-coated blue or equivalent; universal lip profile compatible with all standard hanging storage plastic bins. (QTY 1 FOR EACH BENCH)

• Bin Medium 4-1/8" x 7-3/8" -- blue or equivalent o Characteristics: Heavy-duty molded plastic storage bins (medium size);

standard dimensions approximately 4-1/8" Wide x 7-3/8" Deep; colored blue or equivalent; features a rear hanging lip to securely hook onto the 14-gauge bin rail. (QTY 26 FOR EACH BENCH)

• PENCIL LIP 14ga 89.75 x 2.0 blue or equivalent o Characteristics: Retention lip edge guard; fabricated from durable 14-gauge steel; measures 89.75"W x 2.0"H; powder-coated blue or equivalent; mounts to the edge of shelves to prevent items or tools from rolling or sliding off.

(QTY 2 FOR EACH BENCH)

Assembled, 66W x 24D x 30H Details: ESD Worksurface, Total-lock Casters, HD Frame, Blue (QTY 2)

Core Structure & Frame Components

• FRAME ASSY HYD LEG B 65 x 23 x 23.5 (Blue or equivalent) o Characteristics: Heavy-duty welded steel hydraulic leg assembly frame;

minimal nominal dimensions of 65"W x 23"D x 23.5"H; powder-coated finish in industrial blue to provide chemical and scratch resistance. (QTY 1 FOR

EACH BENCH)

• Powder = Blue RAL 5017 o Characteristics: Industrial powder coating material; color-matched to standard Traffic Blue (RAL 5017); must provide durable, uniform corrosion and impact protection for all metal surfaces. (QTY 1 FOR EACH BENCH)

• WELD SPDR 16GA x 2.0 SQ x 61.0 o Characteristics: Welded frame structural spreader bar; fabricated from minimum 16-gauge square steel tubing measuring 2.0" x 2.0"; overall length of 61.0"; designed to ensure lower lateral frame rigidity. Note: Mount lower spreader at center location (QTY 1 FOR EACH BENCH)

• FRAME WITH REAR SPREADER

o Characteristics: Requires an additional rear support spreader bar to maximize physical stability and load-bearing capacity under heavy operation.

(QTY 1 FOR EACH BENCH)

• BOLT SH SPDR x 16GA x 2.0SQ x 60.875 (Blue or equivalent) Characteristics: Bolt-on structural shoulder spreader beam; 16-gauge 2.0" square steel profiles; exact 60.875" span; pre-drilled hardware alignment channels; powder-coated finish. (QTY 1 FOR EACH BENCH)

• FRAME WITH EXACT WS HEIGHT

o Characteristics: Factory frame engineered to ensure an exact fixed or finalized worksurface height of 30 inches from the floor (including casters/glides). (QTY 1 FOR EACH BENCH)

• Bench Size to match space footprint: 66W x 24D x 30H o Characteristics: Complete dimensional adaptation configuration;

guarantees the fully assembled workbench envelope measures exactly 66" Width x 24" Depth x 30" Height (including top surface and mobile hardware).

(QTY 1 FOR EACH BENCH)

Worksurface & ESD Controls

• TABLE TOP PANEL 1.13 x 66.0 x 24.0 ESD HPL BLK o Characteristics: Electrostatic Dissipative (ESD) High-Pressure Laminate (HPL) industrial tabletop panel; minimum thickness of 1.13"; overall outer boundary dimensions of 66.0"W x 24.0"D; non-reflective black finish;

engineered to safely dissipate static electrical charges away from sensitive electronic assemblies. (QTY 1 FOR EACH BENCH)

• ESD worksurface grounding kit - FULL w/ rectangle hub, lug & straps o Characteristics: Complete single-point ESD grounding hardware system;

includes a low-profile rectangular terminal distribution hub, secure connection lugs, and adjustable operator wrist straps with static-dissipative cords; must provide continuous ground paths conforming to ANSI/ESD S20.20 standards. (QTY 1 FOR EACH BENCH)

Mobility & Mounting Hardware

• Caster Total Lock 4 x 1.25 Blk, 1/2-13 x 1" stm location o Characteristics: Heavy-duty, industrial-grade total-lock swivel casters; 4" wheel diameter with a 1.25" tread width; non-marking black polyurethane wheels; threaded stem mounting configuration utilizing a 1/2"-13 x 1" stem;

features dual-action total-lock braking mechanisms that simultaneously freeze both wheel rotation and swivel tracking. (QTY 4 FOR EACH BENCH)

• 1/2"-13 ASTM A563 Grade A Zinc Finish Steel Jam Nut o Characteristics: Hexagonal locking low-profile jam nuts; threaded to 1/2"-13 specifications; manufactured in strict compliance with ASTM A563 Grade A structural steel standards; corrosion-resistant clear zinc electroplated finish;

utilized to lock mobile casters rigidly to the primary leg housing. (QTY 4 FOR

EACH BENCH)

• HARDWARE KIT FOR HD BENCH D51108-1 (Used for: UNISTRUTS) o Characteristics: Complete specialized fast installation hardware kit matching specification code D51108-1; contains all spring nuts, channel bolts, washers, and anchoring hardware optimized specifically for securing structural Unistrut components. (QTY 1 FOR EACH BENCH)

• STANDARD HARDWARE KIT (D44753-2) (Used for: UNISTRUT ACCESSORIES) o Characteristics: Complete specialized fast installation hardware kit matching specification code D44753-2; contains all accessories for 12” or 15” shelves, power rails, bin rails, monitor rails, and static monitor mounts.

(QTY 4 FOR EACH BENCH)

• L CLIP 1-1/8X1-1/4X1-1/4, 13 GA L-ANGLE

o Characteristics: Right-angle structural mounting bracket ("L-Clip");

fabricated from thick 13-gauge structural steel; nominal dimension profile of 1-1/8" x 1-1/4" x 1-1/4"; pre-punched bolt holes for structural framing joins.

(QTY 4 FOR EACH BENCH)

• UNISTRUT BAR 12GA x 1.63 x 60.0 TRAF (Blue or equivalent) o Characteristics: Heavy-wall commercial Unistrut mounting channel; 12-gauge structural roll-formed profile steel channel; measuring 1.63" x 1.63" structural profile and 60.0" in continuous linear length; Traffic Blue color-finish; serves as a universal anchor backbone for structural accessories.

(QTY 2 FOR EACH BENCH)

• Unistrut cap - White o Characteristics: Safety end caps for structural strut rails; impact-resistant white polymer plastic; designed to friction-fit snugly over standard raw-cut

Cable & Power Management o Characteristics: Industrial high-capacity open-slot routing channel assembly; 72.0" length; high-impact polymer or metal structure; features integrated pass-through pathways to contain and pathway-protect extensive instrumentation cables. (QTY 1 FOR EACH BENCH)

• POWER STRIP 16-PLG, 15FT cord 120V/15A W/SURGE PROTECTION o Characteristics: Industrial-grade power distribution unit; heavy-duty housing measuring roughly 2.31" x 3.0" x 48.0" long; equipped with 16 integrated NEMA 5-15R receptacles; high-joule integrated electrical surge protection; 15-foot heavy-duty grounded power supply cord; electrical rating of 120V AC / 15 Amp continuous service. (QTY 2 FOR EACH BENCH)

• POWER STRIP ASSY 1.5 x 58 (Blue or equivalent) o Characteristics: Low-profile toolbar-integrated power strip assembly;

structural housing measuring 1.5" profile height x 58" width; Traffic Blue color-matched finish; provides localized multiple-outlet utility access across the workspace span. (QTY 2 FOR EACH BENCH)

Shelving, Storage & Accessories

• ANGLED SHELF FRM ASSY 58 x 15 x 6.0 (Blue or equivalent) o Characteristics: Rigid, overhead structural tilted shelf framing; nominal sizing footprint of 58"W x 15"D x 6.0"H; adjustable tilt mechanics for picking/ergonomics; blue powder-coat finish. (QTY 2 FOR EACH BENCH)

• STD SHELF 0.75 x 65.75 x 15.0 LPL BLK o Characteristics: Flat standard accessory shelf board; 0.75" core thickness;

dimensions measuring 65.75"W x 15.0"D; finished in Low-Pressure Laminate (LPL) black; designed to mount flush onto framing. (QTY 2 FOR EACH

BENCH)

• STD lower/upper shelf 0.75 x 65.75 x 18.0 LPL BLK o Characteristics: Extended flat storage shelf board; 0.75" core thickness;

expanded surface area dimensions of 65.75"W x 18.0"D; black Low-Pressure Laminate (LPL) finish. (QTY 1 FOR EACH BENCH)

• BIN RAIL ASSY 14 GA x 58 x 0.87 x 2.25 (Blue or equivalent) o Characteristics: High-strength cantilevered part-bin hanging rail; fabricated from thick 14-gauge structural steel; total span dimensions of 58"W x 0.87"D x 2.25"H; blue finish; designed to clip or hook rows of storage bins securely without sagging. (QTY 1 FOR EACH BENCH)

• Bin Medium 4-1/8" x 7-3/8" -- blue or equivalent o Characteristics: Hanging organizer storage parts bins; medium footprint format measuring approximately 4-1/8"W x 7-3/8"D; molded from high-impact polymer plastic; colored blue to match workspace aesthetics;

features molded rear lips for easy slotting onto bin rails. (QTY 20 FOR EACH

BENCH)

• PENCIL LIP 14ga 65.75 x 2.0 (Blue or equivalent) o Characteristics: Flat-surface retaining edge lip; robust 14-gauge steel sheet construction; measuring 65.75" long with a 2.0" vertical projection barrier;

powder-coated in Blue or equivalent; prevents small parts, drawings, or instruments from sliding off work boundaries. (QTY 2 FOR EACH BENCH)

Assembled, 84W x 24D x 30H Details: ESD Worksurface, Total-lock Casters, HD Frame, Blue (QTY 3)

Frame & Structural Components

• FRAME ASSY HYD LEG B 83.0” W x 23.0” D x 23.5” H (Blue or equivalent) o Characteristics Heavy-duty, 2.0-inch square hydraulic leg frame assembly, measuring 83.0” W x 23.0” D x 23.5” H. Must feature an integrated hydraulic height-adjustment mechanism and be finished in industrial Blue powder coat (RAL 5017) or equivalent. (QTY 1 FOR EACH BENCH)

• Powder = Blue RAL 5017 o Characteristics: Commercial-grade industrial powder-coat finish matching

Blue RAL 5017 color specification for high durability and chemical resistance. (QTY 1 FOR EACH BENCH)

• WELD SPDR 16GA x 2.0 SQ x 79.0 o Characteristic: Welded frame structural spreader bar; fabricated from minimum 16-gauge square steel tubing measuring 2.0" x 2.0"; overall length of 79.0"; designed to ensure lower lateral frame rigidity. Note: Mount lower spreader at center location (QTY 1 FOR EACH BENCH)

• FRAME WITH REAR SPREADER

o Characteristics Requires an additional rear support spreader bar to maximize physical stability and load-bearing capacity under heavy operation.

(QTY 1 FOR EACH BENCH)

• BOLT SH SPDR x 16GA x 2.0SQ x 78.875 (Blue or equivalent) o Characteristics: Bolt-on structural shoulder spreader beam; 16-gauge 2.0" square steel profiles; exact 78.875” span; pre-drilled hardware alignment channels; powder-coated finish. (QTY 1 FOR EACH BENCH)

• FRAME WITH EXACT WS HEIGHT

o Characteristics: Factory frame engineered to ensure an exact fixed or finalized worksurface height of 30 inches from the floor (including casters/glides). (QTY 1 FOR EACH BENCH)

• Bench Size to match space footprint: 84W x 24D x 30H o Characteristics: Complete dimensional adaptation configuration;

guarantees the fully assembled workbench envelope measures exactly 84" Width x 24" Depth x 30" Height (including top surface and mobile hardware).

Factory frame engineered to ensure an exact fixed or finalized worksurface height of 30 inches from the floor (including casters/glides). (QTY 1 FOR

Worksurface & ESD Protection

• TABLE TOP PANEL 1.13 x 84.0 x 24.0 ESD HPL BLK o Characteristics: Electrostatic Dissipative (ESD) High-Pressure Laminate

(HPL) industrial tabletop panel; minimum thickness of 1.13"; overall outer boundary dimensions of 84.0” W x 24.0” D; non-reflective black finish;

engineered to safely dissipate static electrical charges away from sensitive electronic assemblies. Must meet ANSI/ESD S20.20 standards for static dissipation. (QTY 1 FOR EACH BENCH)

• ESD worksurface grounding kit - FULL w/ rectangle hub, lug & straps o Characteristics: Complete single-point ESD grounding hardware system;

includes a low-profile rectangular terminal distribution hub, secure connection lugs, and adjustable operator wrist straps with static-dissipative cords; must provide continuous ground paths conforming to ANSI/ESD S20.20 standards. (QTY 1 FOR EACH BENCH)

Mobility & Mounting Hardware

• Caster Total Lock 4 x 1.25 Blk, 1/2-13 x 1" stm location.

o Characteristics: Heavy-duty, industrial-grade total-lock swivel casters; 4" wheel diameter with a 1.25" tread width; non-marking black polyurethane wheels; threaded stem mounting configuration utilizing a 1/2"-13 x 1" stem;

features dual-action total-lock braking mechanisms that simultaneously freeze both wheel rotation and swivel tracking. (QTY 4 FOR EACH BENCH)

• 1/2"-13 ASTM A563 Grade A Zinc Finish Steel Jam Nut o Characteristics: Hexagonal locking low-profile jam nuts; threaded to 1/2"-13 specifications; manufactured in strict compliance with ASTM A563 Grade A structural steel standards; corrosion-resistant clear zinc electroplated finish;

utilized to lock mobile casters rigidly to the primary leg housing. (QTY 4 FOR

EACH BENCH)

• HARDWARE KIT FOR HD BENCH D51108-1 (Used for: UNISTRUTS) o Characteristics: Complete specialized fast installation hardware kit matching specification code D51108-1; contains all spring nuts, channel bolts, washers, and anchoring hardware optimized specifically for securing structural Unistrut components. (QTY 1 FOR EACH BENCH)

• STANDARD HARDWARE KIT (D44753-2) (Used for: UNISTRUT ACCESSORIES) o Characteristics: Complete specialized fast installation hardware kit matching specification code D44753-2; contains all accessories for 12” or 15” shelves, power rails, bin rails, monitor rails, and static monitor mounts.

(QTY 4 FOR EACH BENCH)

• L CLIP 1-1/8X1-1/4X1-1/4, 13 GA L-ANGLE

o Characteristics: Right-angle structural mounting bracket ("L-Clip");

fabricated from thick 13-gauge structural steel; nominal dimension profile of 1-1/8" x 1-1/4" x 1-1/4"; pre-punched bolt holes for structural framing joins.

(QTY 4 FOR EACH BENCH)

• UNISTRUT BAR 12GA x 1.63 x 60.0 TRAF (Blue or equivalent) o Characteristics: Heavy-wall commercial Unistrut mounting channel; 12-gauge structural roll-formed profile steel channel; measuring 1.63" x 1.63" structural profile and 60.0" in continuous linear length; Traffic Blue color-finish; serves as a universal anchor backbone for structural accessories.

(QTY 2 FOR EACH BENCH)

• Unistrut cap - White o Characteristics: Safety end caps for structural strut rails; impact-resistant white polymer plastic; designed to friction-fit snugly over standard raw-cut

Cable Management & Power Distribution o Characteristics: Industrial high-capacity open-slot routing channel assembly; 72.0" length; high-impact polymer or metal structure; features integrated pass-through pathways to contain and pathway-protect extensive instrumentation cables. (QTY 1 FOR EACH BENCH)

• POWER STRIP 24-PLG, cord 120V/15A W/SURGE PROTECTION o Characteristics: 72.0” L x 2.31” W x 3.0” H industrial power strip featuring 24 outlets, integrated surge protection, a 15-foot heavy-duty power cord, and rated for standard 120V/15A operation. (QTY 2 FOR EACH BENCH)

• POWER STRIP ASSY 1.5 x 76 TRAF (Blue or equivalent) o Characteristics: Low-profile toolbar-integrated power strip assembly;

structural housing measuring 1.5" profile height x 76" width; Blue or equivalent color-matched finish; provides localized multiple-outlet utility access across the workspace span. (QTY 2 FOR EACH BENCH)

Shelving, Storage & Accessories

• ANGLED SHELF FRM ASSY 76 x 15 x 6.0 (Blue or equivalent) o Characteristics: Rigid, overhead structural tilted shelf framing; nominal sizing footprint of 76"W x 15"D x 6.0"H; adjustable tilt mechanics for picking/ergonomics; Blue powder coat or equivalent. (QTY 2 FOR EACH

BENCH)

• STD SHELF 0.75 x 83.75 x 15.0 LPL BLK o Characteristics: Flat standard accessory shelf board; 0.75" core thickness;

dimensions measuring 65.75"W x 15.0"D; finished in Low-Pressure Laminate (LPL) black; designed to mount flush onto framing. (QTY 2 FOR EACH

BENCH)

• STD Lower/Upper Shelf 0.75 x 83.75 x 18.0 LPL BLK o Characteristics: Extended flat storage shelf board; 0.75" core thickness;

expanded surface area dimensions of 65.75"W x 18.0"D; black Low-Pressure Laminate (LPL) finish. (QTY 1 FOR EACH BENCH)

• BIN RAIL ASSY 14 GA x 76 x 0.87 x 2.25 (Blue or equivalent) o Characteristics: High-strength cantilevered part-bin hanging rail; fabricated from thick 14-gauge structural steel; total span dimensions of 76"W x 0.87"D x 2.25"H; blue finish; designed to clip or hook rows of storage bins securely without sagging. (QTY 1 FOR EACH BENCH)

• Bin Medium 4-1/8" x 7-3/8" -- blue or equivalent o Characteristics: Hanging organizer storage parts bins; medium footprint format measuring approximately 4-1/8"W x 7-3/8"D; molded from high-impact polymer plastic; colored blue to match workspace aesthetics;

features molded rear lips for easy slotting onto bin rails. (QTY 1 FOR EACH

BENCH)

• PENCIL LIP 14ga 83.75 x 2.0 (Blue or equivalent) o Characteristics: Flat-surface retaining edge lip; robust 14-gauge steel sheet construction; measuring 83.75" long with a 2.0" vertical projection barrier;

powder-coated in Blue or equivalent; prevents small parts, drawings, or instruments from sliding off work boundaries. (QTY 2 FOR EACH BENCH)

File details come from the government source that posted it. Updated .