17QB104_Sources_Sought-Signed.pdf

SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR PROPOSAL

BUT INFORMATION AND PLANNING PURPOSES ONLY! It does not constitute a solicitation and/or quote and is not to be construed as a commitment by the

Government.

The Request for Quotation (RFQ) number is FA2521-17-Q-B104 shall be used to reference any written responses to this source sought.

Patrick Air Force Base anticipates a requirement that is being considered under a small business set-aside program. The North American Industry Classification Systems

(NAICS) Code proposed 334515. The size standard for NAICS is 750 Employees

The requirement is to provide 1 each manufacturer refurbished N9040B-526 UXA Signal

Analyzer, 3 Hz to 26.5 GHz with 3 years manufacture warranty for the Frequency

Analysis (FCA) Vehicle with the following options:

- N9040B-B5X, Analysis bandwidth, 510 MHz

- N9040B-P26, Preamplifier, 26.5 GHz

- N9040B-RT2, Real-time analysis up to maximum

- N9040B-ALV, Auxiliary Log Video Output

- N9040B-RTS, Real time wide band

- N9040B-FT2, Frequency Mask Trigger

- 1CM042A, Rack mount kit

- N6171A, MATLAB

Salient Characteristics:

- Frequency: 3 Hz to 26.5 GHz, Mixers to 1.1 THz 3

- Maximum Analysis Bandwidth: 160 MHz

- Bandwidth Options: 25 standard, 40, 85, 125, 160 MHz

- Maximum Real-Time Bandwidth: 160 MHz

- Real-Time Bandwidth Options: 510 MHz

- DANL @1 GHz: -171 dBm

- Phase Noise @1 GHz (10 kHz offset): -132 dBc/Hz

- Phase Noise @1 GHz (1 MHz offset): -146 dBc/Hz

- Overall Amplitude Accuracy: ±0.19 dB

- TOI @1 GHz (3rd Order Intercept): +22 dBm

- Maximum Dynamic Range 3rd Order @1 GHz: 119 dB

- Applications-General Purpose:

• Analog Demodulation

• EMI Precompliance

• Flexible Digital Modulation Analysis

• MATLAB

• Noise Figure

• Phase Noise

• Pulse

• Real-Time Spectrum Analysis

• Remote Language Compatibility

• SCPI Code Compatibility

-Applications-Digital Video:• CMMB

• Digital Cable TV

• DTM B

• DVB-T/H

• ISDB-T/Tmm

-Standard Attenuator Range: 70 dB

-Standard Attenuator Step: 2 dB

-Minimum Duration for 100% Probability of Intercept: 3.57 μs

-Spur Free Dynamic Range: 75 dBc

-Triggering:

• FMT (Frequency Mask Trigger)

• TQT (Time Qualified Trigger)

• Level

• RF Burst

• Line

• External

• Periodic

-Applications with Frequency Mask Trigger:

• 89600 VSA Software

• Real-Time Spectrum Analyzer

Options:

- N9040B-B5X, Analysis bandwidth, 510 MHz

- N9040B-P26, Preamplifier, 26.5 GHz

- N9040B-RT2, Real-time analysis up to maximum

- N9040B-ALV, Auxiliary Log Video Output

- N9040B-RTS, Real time wide band

- N9040B-FT2, Frequency Mask Trigger

- 1CM042A, Rack mount kit

- N6171A, MATLAB

- N9063C Analog Demodulation Measurement

- N9067C, Pulse Measurement application

NOTE: RESPONSES TO THIS SOURCES SOUGHT SHALL STATE IF THEY

ARE A SUPPLIER OR MANUFACTURER!

The purpose of this requirement is to meet the 45SW multiple instantaneous mission support requirements, an additional frequency control analysis (FCA) vehicle with fully equipment and signal analyzers must be required.

45 CONS is interested in any size business that is capable of meeting this requirement.

The government is also interested in all small businesses including (8(a), Historically

Underutilized Business Zone, Service Disabled Veteran Owned Small Businesses

(SDVOSB), or, if applicable based on NAICS code, Economically disadvantaged women-owned small business (EDWOSB) Women Owned Small Businesses (WOSB) that are interested in performing this requirement. The government requests interested parties submit a brief description of their company's business size (i.e. annual revenues and employee size), business status (i.e., 8(a), Historically Underutilized Business Zone, or SDVOSB, WOSB, EDWOSB, or small business) anticipated teaming arrangements, and a description of similar services offered to the Government and to commercial customers.

Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners. The

Government will use this information in determining its small business set-aside decision.”

As stipulated in FAR 15.201, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. No solicitation exists;

therefore, do not request a copy of the solicitation. The decision to solicit for a contract shall be solely within the Government's discretion.

Any information submitted by respondents to this sources sought synopsis is voluntary.

This sources sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any government assessments. The Government's evaluation of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small businesses, or any particular small business designation (e.g. SDVOSB, HUBZone, 8(a), WOSB, VOSB, etc.).

All interested firms shall submit a capabilities package that explicitly demonstrates company capabilities-indicating examples of commercial sales-and product specifications related to this effort. Also indicate if you are the manufacturer, or provide the name and size of the manufacturer of the product(s) you will be supplying. Respondents are further requested to indicate their status as a Foreign-owned/foreign-controlled firm and any contemplated us of foreign national employees on this effort.

Include in your capabilities package your DUNS, Cage Code, System for Award

Management expiration date, GSA contract number and expiration (if applicable), and any related specifications/drawings.

Responses may be submitted electronically to the following e-mail address:

45cons.lgcb.e-bids@us.af.mil and david.freitag.1@us.af.mil.

mailto:45cons.lgcb.e-bids@us.af.mil mailto:david.freitag.1@us.af.mil

For any questions or concerns please contact David Freitag at david.freitag.1@us.af.mil or 321-494-0092

RESPONSES ARE DUE NO LATER THAN April 19, 2017.

Approved

Contracting Officer mailto:david.freitag.1@us.af.mil