SOW Embroider Seats.pdf

STATEMENT OF WORK/SERVICE

SEAT COVERS AND BUNK MATTRESS COVERS

1. SCOPE: To outline the procedures and responsibilities in the performance of this Statement of Work (SOW) of both the requesting agency and the vendor the contract is awarded to. This SOW does not in any way limit the responsibility of the vendor to perform all work and furnish all materials required to do a complete job within the intent and scope.

a. The vendor is responsible for supplying material (except seat bottom, seatback, and bunk covers), equipment, and labor necessary to perform all operations in accordance with this SOW using attached pictures and drawings for each cover.

b. The requesting agency will provide the seat bottom, seatback, and bunk covers.

2. DESCRIPTION OF WORK/SERVICE

2A. Requesting Agency Responsibilities:

2Al. Will provide tf\~;;y~iiJtt;;r'~POC at time the contract is awarded.

2A2. Will provide and ship the seat bottom, seatback, and bunk covers to the vendor who is awarded the contract at the requesting agency's expense.

2B. Vertdor Responsibilities:

2Bl. The vendor will provide a POC to_at the time of the contract award.

2B3. Embroider Team Travis logo on both sides of each seat bottom cushion cover.

This task requires removing seatbelt tabs and attachment loops, embroidering the logo, then reattaching seatbelt tabs and attachment loops at their original location. See .

specifications and pictures for the lower seat cushion cover below.

2B4. Embroider Team Travis logo on both sides of each seat back. See.

specifications for the seat back cushion cover below. Embroider the State of California logo on the front of the seat back cover. See specifications and pictures for the seat back cushion cover below.

2B5. Embroider Team Travis logo with arrows facing forward on one side of provided bunk cushion cover. See attached specifications and pictures for the bunk cover below.

3 SPECIFICATIONS:

3A. All material used to embroider the covers must meetF AA appendix F - Part II of Part 25 of FAR approved flame retardant standards.

3B. Colors will match pictures: Bear-gold and trimmed with black, Grass-green, Tongue-red, and red line under grass, State of California in gold, and Team Travis in silver. All Team Travis logos in silver.

3C. Seat bottom: Embroider Team Travis logo (9" long X 2" wide) per attached picture of logo (below) and per measurement of arrows pointing toward the back of the seat, centered front to back with % from the top of side panel and 11/8 from bottom of side panel.

3D. Seat back: Embroider Team Travis (9" long X 2" wide) logo on side of provided back rest seat cover cushion per attached picture (below) and per measurement, with arrows pointing in the down direction, 6 inches from bottom seam, 7 inches from the top seam, centered 1/2 inch from top side seam 1/2 inch bottom side seam. The State of California logo (6" wide X 5" tall) , centered from side-to-side (5 inches each side) on the front of the seat back cover, 4 inches from the top seam, and 8 1/2 inches from the bottom seam.

3E. Bunk cover: Embroider Team Travis logo (9" long X 2" wide) per attached picture (below) and per measurements, centered (32 %inches) between front and rear seam, and 3/8 inches from topside seam and 7/8 inches from the bottom ~eam.

EndSOW .