Milling Machine RFI.docx
DOCX document 18 KB Posted
- Attached to
- F3YTAJ6058AW01 - Milling Machine
- Solicitation number
- F3YTAJ6058AW01
About this file
This is a Request for Information (RFI) document for a two-axis vertical milling machine procurement by the Department of the Air Force Materiel Command Air Force Sustainment Center. The solicitation number is F3YTAJ6058AW01, and the machine is required for delivery to 552 MXS/MXMFM/7701 1st Street, Building 230, Tinker Air Force Base, Oklahoma 73145, with an anticipated delivery date of 90 days after receipt of order.
The RFI specifies detailed technical requirements for the milling machine, including a two-axis vertical configuration with digital DRO (Digital Readout), R8 spindle taper, and an RPM range of 60–4,200. Required travel dimensions are X-Axis: 34 inches, Y-Axis: 12 inches, Z-Axis: 5 inches, Knee Travel: 14.5 inches, and Ram travel: 13.375 inches. The machine must accommodate four-axis configuration (table, saddle, knee, and quill) and operate on 230V/3-phase/60Hz power. The Air Force will arrange power hookup through local civil engineering contractors, and no vendor training or special electrical box is required. Installation support, warranty information, and documentation requirements should be addressed by the vendor, with operational questions to be resolved through the owner's manual. Point of contact for the procurement is Darrius Miller at darrius.miller.2@us.af.mil or 901-356-4156.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
F3YTAJ6058AW01- Milling Machine RFIs
1. Place of Performance / Delivery Location Please confirm the full delivery address or place of performance where the machine is required to be delivered, installed, or operated.
| 552 MXS/MXMFM/7701 1st St. Bldg 230, Tinker AFB, OK, 73145 | |
| 2. | Scope of Work |
Please provide the detailed scope of work, including any specific requirements for delivery, installation, testing, training, documentation, warranty, or any other support services expected from the vendor.
| Once part is delivered, local CE contractors will hook up to power. No training should be necessary, shop personal will be well versed on machine use. Any questions about specific functions should be found within owners manual. | |||
| • | Power Requirements for the spindle motor | ||
| 230V/3-phase/60HZ | |||
| • | All of our mills are 4 axis, table, saddle, knee, and quill – Is this acceptable? | ||
| Yes | |||
| • | Will they require a JIC electrical box? | ||
| No | |||
| • | Do they have a minimum travel size needed? | ||
| The following are what should be on the machine trying to be ordered and will suffice for what the shop requires: | |||
| x-Axis: 34” | |||
| y-Axis: 12” | |||
| z-Axis: 5” | |||
| Knee Travel: 14-1/2” | |||
| Ram travel: 13-3/8 | |||
| • | What spindle taper do they need? | ||
| R8 spindle taper | |||
| • | RPM Range? | ||
| 60-4,200 | |||
| 3. | Will this machine is to be a 2 axis CNC or two Axis milling machine with DRO. Do you have any other specifications as to sizes? | ||
| It is a two axis vertical milling CNC machine with a digital DRO. No other specifications. |
File details come from the government source that posted it. Updated .