RFI 1 - 3001G Furniture.pdf

F3YCAJ0219A101 - 3001G Office Furniture

RFI 1

RFI Regarding FF&E Requirements

Question: Please confirm the description and quantities identified on the attached document

(Proposed Furniture RFI 1.pdf) will meet the requirements listed. If so, this will allow for up to

90 personnel in the identified space.

Answer: The government confirms that the items and quantities listed meet our requirements for teleworking employees to have a “touch down” spot on Tinker AFB.

Question: Please confirm that floor to ceiling walls with a .44 STC rating is required to separate storage area and work are, figuring approximately 56LF. A door allowing access to storage would be provided.

Answer: The government confirms that the storage area needs to be separated from the work area with a wall and access door.

Question: Please confirm that all furnishings need to have applicable power and comm termination points to provide user with full functionality.

Answer: The government confirms that all furnishings must have sufficient power and communication termination points for all possible users to operate with full functionality.

RFI Regarding Power Requirements

Question: Please confirm which power panel is dedicated for use to provide applicable power to furnishings.

Answer: The government confirms that any power panel in the room with sufficient capacity may be used for the furnishings.

Question: Is there a specific power system to be used for the raised floor or can standard conduit and floor boxes be used?

Answer: Standard conduit and floor boxes may be used in this space.