Amendment_1.pdf
PDF 56 KB Posted
- Attached to
- Center Vertical Restraints
- Solicitation number
- F3UUAU8193AW01
About this file
Amendment to specifications
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment_1.pdf | ||
| COMBO_Center_vertical_Restraints.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Amendment 1
The purpose of this amendment is to correct wording previously used in Attachment 1 to add:
This is a Brand name or equal:
Centerline Vertical Restraint System
Part number: V V85120100‐10 for a C‐130 Air craft
Specifications for this part include:
The CVRS is designed for use on the C‐130 aircraft to provide vertical and lateral restraint of Container Delivery System (CDS) containers during flight and throughout the airdrop phase. The CVRS permits the airdrop of up to twelve A‐22 containers from each side of the aircraft. Each container can be rigged and airdropped in a single pass, for a total of 24 individual containers, or all 24 can be airdropped simultaneously. The CVRS was designed to accommodate 48” plywood skidboards; however, 48”x 53.5” and 48”x 96” plywood skidboards may be airdropped with the CVRS installed by rotating the skidboard(s) 90 degrees to allow the 48” side to fit between the CVRS and the aircraft dual rails. The CVRS uses the existing tiedown rings in the aircraft and provides a similar set of tiedown rings as replacement. No special tools are required to install the CVRS. A team of two people can install or remove the CVRS in less than 30 minutes.
This is a brand name or equal requirement. Any products not brand name should be technically equal to this.
File details come from the government source that posted it.