Q&A AMD01.pdf

Questions and Answers for

RFQ F3QCCM0008A101

Question 1:

1.0 DESCRIPTION. The Contractor shall provide all tools, parts, materials, equipment, labor, transportation, and supervision necessary to integrate a Fanuc 0i-MF digital Computer Numerical Control (CNC) to the 3-axis SIP Jig Bore machine for the 402d Commodities Maintenance Group (CMXG) at Robins Air Force Base (AFB), Georgia. The servos and the magnetics used to control the machine will be housed inside the existing electrical cabinets. Miscellaneous components such as motor starters, contactors, and control relays, etc. may be re-used. The Contractor shall also rebuild/retrofit the following 3-axis SIP Jig Bore machine to original like new condition

Also section 2.2.15 talks about timelines for the control & retrofit.

Not sure if they would work based on standard delivery of components & the retrofit of the machine.

We will estimate in the quote basic component delivery & expected retrofit time.

Would that work?

Section 3.1 states you will supply some components.

The way I read this is these are the component we will receive that would allow us to build the kit, rebuild the spindle, order the hydraulic & coolant pump.

That would then be installed, the kit & components at your facility?

Answer 1:

1. It is a retrofit only with the spindle rebuild plus new hydraulic unit & Coolant pump.

Estimate in the quote the basic component delivery & the expected retrofit time.

Yes, these are the components that will be made available to you to allow you to build the kit, rebuild the spindle, order the hydraulic & coolant pump. However, the contractor will be responsible for the disassembly of such components as well as the shipping.