Salient Characteristics.docx

This requirement is for Computer simulated and diagnostic boards that are linked to computer simulated software. Computer software must be able to simulate starting, charging systems, engine controls and electrical lighting systems. Diagnostic boards must be able to simulate starting and charging systems as well. The diagnostics boards are linked to the computer allowing the instructor the ability to input faults. Need the training aids listed below or approved equal allowing hands on repair and troubleshooting skills. The training aids should also allow students to see the inner workings as well as the ability to disassemble and reassemble.

0001 - Model #1801B-ATech Electricity & Electronics Program or approved equal

The Troubleshooting Trainer (model - 1801B) is the workstation for ATech’s Automotive Electricity and Electronics Programs. This trainer features modified digital meter (volt-ohm-amp) to accelerate Ohm’s Law learning, includes integrated power supply, and 12VDC power source for use with courses.

Features:

• Supports Automotive Electricity Computer Based Instruction (CBI) Software (model - 1810W)

• Supports Automotive Electronics Computer Based Instruction (CBI) Software (model - 1820W)

• Hands-on activities and computer animation hold student interest

• Provides troubleshooting practice and competency testing

• Classroom management with remote fault insertion capability

• Print or export Student Records

• NEW USB connectivity

• NEW RJ45 connection to ATech Network System (ANS)

• NEW RJ45 connection to ATech Keypad

0002 - Model #1821-Automotive Electronics Courseboard or approved equal

The Automotive Electronics Courseboard - model 1821 is a hands-on study of basic automotive electronics that includes a Courseboard and USB drive containing the Student Manual and Instructor Guide. Also included in this courseware package is an on-site copy license to allow for the reproduction of instructional materials for use in the classroom.

The Automotive Electronics Courseboard features real fixed components and wire terminals. 12-Volt power supply not included. Does not include fault insertion capability.

Activities Include:

UNIT I - Introduction to Electronics

• Electricity to Electronics

• The Digital Multi-Meter

• Why use a DMM?

UNIT II - Introduction to Semiconductors/Diodes

• Diode Behavior

• The Diode as a Rectifier

• The Light Emitting Diode (LED)

• The Clamping Diode

• The Zener Diode

UNIT III - Transistor Circuits

• The Transistor Circuit

• The Amplifier

• Transistor Troubleshooting

• Combining Transistors

UNIT IV - More Electronics

• The Capacitor

• The Photo Resistor

• Combined Electronics

0003 - Model #811FJ-Starting System Fault Courseboard or approved equal

• New Components

• Factory Wire Colors

• Battery Posts (Battery NOT Included)

• Network/Manual Fault Insertion

• Courseware Included

0004 - Model #812FJ-Charging System Fault Courseboard or approved equal

• New Components

• Compatible with Service Manual Procedures

• 1 ½ HP Drive Motor

• Network/Manual Fault Insertion

• Battery Posts (Battery NOT Included)

• Courseware Included

0005 - Model #821FJ-Lighting System Fault Courseboard or approved equal

• New Components

• “By-the-Book” Diagnostics

• Controlled by Body Control Module (BCM)

• Battery Posts (Battery or Power Supply NOT Included)

• Network/Manual Fault Insertion

• Courseware Included

0006 - Model #400-2W-Disc and Drum brake simulator or approved equal

0007 - Model #120-Rear axle mock up with cut away or approved equal

0008 - Model #6681-Standyne Diesel pump with cut away or approved equal

0009 - Model #6682-Cummins PT Diesel pump with cut away or approved equal

Additional Requiremnt includes Computer based troubleshooting training software program based on various systems (listed below) that deal with the basic concepts of troubleshooting automotive components. The program should be able to operate in "Random Mode" where faults are selected randomly for each circuit chosen or can have an "Instructor" select faults from various circuits to be activated as each student runs the program.

0010 - Model #2815-Starting Systems or approved equal

The Starter System Troubleshooting Trainer is a software program based on a Starting System and deals with the basic concepts of troubleshooting those automotive components. This program can operate in Random Mode where the faults are selected randomly for each circuit chosen, or the instructor can select faults from various circuits to be activated as each student runs the program.

Features:

• Realistic operation of starter system.

• Built-in DVOM and Load Tester.

• Student performance is stored in Central Records or on a student USB drive as the student proceeds through the program.

• Instructor uses IMP to create student record, and assigns ID number and password for student login.

• Visual reinforcement of circuit behavior.

• Network Version Available - model 2815N Activities Include:

• Troubleshooting section that can insert 47 possible faults into starting circuits for diagnosis in Training or Advance Mode.

0011 - Model #2816-Charging Systems or approved equal

The Charging System Troubleshooting Trainer is a software program based on a Charging System and deals with the basic concepts of troubleshooting those automotive components. This program can operate in Random Mode where the faults are selected randomly for each circuit chosen, or the instructor can select faults in various circuits to be activated as each student runs the program.

Features:

• Realistic operation of charging system.

• Built-in DVOM and Load Tester.

• Student performance is stored in Central Records or on a student USB drive as the student proceeds through the program.

• Instructor uses IMP to create student record, and assigns ID number and password for student login.

• Visual reinforcement of circuit behavior.

• Network Version Available - model 2816N

Activities Include:

• Troubleshooting section that can insert 19 possible faults into charging circuits for diagnosis in Training or Advance Mode.

0012 - Model #3610-Engine Control Fundamentals or approved equal

This program consists of 21 student activities with more than 60 animations – designed to present the fundamentals of engine control components. Includes “hands-on” digital voltmeter use.

0013 - Model #3620-Engine Control System Operations or approved equal

This program consists of 14 student activities with more than 60 animations – designed to present “closed loop” emission control systems. Includes “hands-on” voltmeter and oscilloscope usage.