F2M3CB4179A001 Salient Characteristics B738.pdf
PDF 88 KB Posted
- Solicitation number
- F2M3CB4179A001
About this file
This document is a Sources Sought Notice for a 25HP Motor and Vertical Turbine Pump for the Department of the Air Force Air Education and Training Command. The key details are:
The government is seeking a full-featured commercial-industrial vertical turbine pump with specific salient characteristics, including a design of 1125 USGPM @ 70' TDH, 2-stage, 1170 RPM, and a 25HP, 1200RPM, 3 phase/60Hz/230-460V driver assembly. The required discharge head assembly, shaft guard, base plate, and bowl assembly components are also detailed.
Interested sources are requested to fill out and return the Sources Sought document by 12 August 2024 at 12:00PM CST to Christina Gregory via email. No other information about the acquisition timeline, pricing, or set-asides is provided.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| F2M3CB4179A001- Sources Sought.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics: The pump shall be a full-featured commercial-industrial product for the purpose of supporting a Chilled Water Plant. The pump needs to have the following characteristics:
Design: 1125 USGPM @ 70’ TDH (Total Dynamic Head) 1170 RPM
2 Stage Vertical Turbine Pump.
Driver Assembly Section: U.S. 25HP, 1200RPM, 3 phase/60Hz/230-460V with a 324 TP Frame, Vertical Hollow Shaft and 1.1875” Drive Coupling.
Discharge Head Assembly Section: 1.1875” x34.22”x416SS Head Shaft Assembly
F-Style Fabricated Steel Head with 8” Class 150# Steel Raised Face Discharge Flange for 16.5” BD with 25” width x 25” length x 1.38” thick integral base.
Shaft Guard: Special Fabrication 1.1875” Cast Iron Packing Box Assembly with B10 C932 Bronze Bearing.
#1345 Packing, Bronze Lantern Ring and SS Packing Gland.
Base Plate: Special Steel 25” W x 25” L X1” Thick
Pump end Discharge case close coupled directly to discharge head.
Once Piece Bowl and Top Shaft: Top shaft portion=1.1875” DIA-WL x 118TPI x 21” in length.
Bowl Assembly Section: 14LH – 2 stage Product Lubricated Bow Assembly w 18-8 Stainless Steel
Fasteners Must Include: Ductile Iron Discharge Case with B10 C932 Bronze Bearing
- Ductile Iron Bowls
- B10 C932 Bronze Bowl Wear Rings
- B 10 C932 Bronze Bowl Bearings
- 201SS Impellers with 316SS Collets
- One Piece Bowl and Top Shaft: Bowl Shaft Portion= 1.6875" DIA x 416SS
File details come from the government source that posted it. Updated .