F2027058 Technical Specifications.pdf
PDF 134 KB Posted
- Attached to
- Purchase of Construction Road Sweepers
- Solicitation number
- F2027058
- Issued by
- Tarrant County, Garland City, Texas
About this file
This is a Technical Specifications document for the Texas state procurement (GovTribe ID: F2027058) related to the purchase of construction road sweepers. The document establishes the technical requirements and specifications that road sweeper equipment must meet to qualify for purchase under this contract opportunity. The procurement seeks to acquire road sweepers designed for sweeping roads and pushing debris, with specifications outlining performance standards, design requirements, operational capabilities, and quality benchmarks that vendors' equipment must satisfy for bid consideration.
The technical specifications document serves as the baseline for evaluating vendor submissions and ensuring that all purchased equipment meets the state's operational and performance standards. Prospective bidders must review these specifications carefully to confirm their equipment complies with all stated requirements prior to submitting their bids. The document does not indicate specific quantities, pricing terms, set-asides, response deadlines, or contract duration in the summary provided, though these elements would typically be detailed in the main solicitation documents accompanying this technical specifications file.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
IFB No. F2027058 Page 1
TECHNICAL SPECIFICATIONS
I. PURPOSE
A. Tarrant County is requesting bids for a self-propelled front mounted sweeper broom and a road construction sweeper mid-mounted with front blade. The technical specifications for both type of sweepers will be included below.
B. Tarrant County intends to award to the lowest responsible bidder who meets or exceeds specifications based on price of the equipment including standard warranty and delivery costs.
II. GENERAL REQUIREMENTS
A. This specification requires the latest production model for the basic unit and any components required to produce the whole equipment unit described within. All parts and supplies not specifically mentioned that are necessary for units to be complete and ready for operation or are normally furnished as standard equipment must be furnished by the Vendor at no additional cost.
B. Awarded vendor must not begin production of requested equipment before receiving a Tarrant County purchase order.
C. It is preferred that Bidders include a detailed specification sheet with their bid submission. Specification sheets must include references to all specifications included in this Statement of Work at a minimum. Tarrant County reserves the right to require that vendors provide this information before proceeding with award.
III. DELIVERY REQUIREMENTS
A. Bidders must provided estimated delivery lead times that are as accurate as possible.
B. Awarded vendor must include all delivery costs in base cost of the equipment.
C. Awarded vendor must deliver equipment fully assembled and ready to use.
D. Awarded vendor must not delete any equipment that is included as standard by the equipment manufacturer from delivered equipment.
E. Awarded vendor must provide an operator’s manual for offered equipment at time of delivery. Tarrant County will accept a digital operator’s manual.
F. Awarded vendor must not include decals or advertisements on delivered equipment.
The exception to this requirement are manufacturer standard markings. This should include preventative maintenance instruction schedule, consisting of manufacturer’s recommendations for periodic lubrications, inspections and adjustments must be furnished.
IV. FEDERAL AND STATEMENT REQUIREMENTS
A. The units delivered by the awarded vendor must meet, or exceed all Federal and State of Texas safety, health, lighting, and noise regulations and standards in effect at the time they were manufactured.
IFB No. F2027058 Page 2
B. All units must meet or exceed all EPA emission requirements that are in effect on the date of the bid opening. Points and/or credits must not be used to meet emission requirements.
V. WARRANTY
A. Standard Warranty:
1. All standard manufacturer warranty information must be included with bid response as an attachment.
2. The awarded vendor must promptly provide the services that Tarrant County is entitled to under the terms of the manufacturer’s warranty.
3. Any Computer technology fixes or upgrades that are issued during the warranty period shall be installed at no charge to the County including but not limited to travel time, administrative costs, and fuel surcharges.
4. Technicians must travel to Tarrant County Precinct Maintenance Facility, or the job site, if necessary, at no charge to the County, to perform required warranty service unless otherwise arranged.
VI. SERVICE INFORMATION
A. Complete set of filters.
B. Operations, Parts, and Service Manual
IFB No. F2027058 Page 3
TECHNICAL SPECIFICATIONS FOR SELF-PROPELLED FRONT MOUNTED SWEEPER
BROOM
A. Awarded vendors must provide equipment that meets or exceeds the following specifications at a minimum for Self-Propelled Front Mounted Sweeper Brown.
B. General Requirements:
1. Dimensions:
a. Minimum height 91 inches
b. Minimum length 186 inches
c. Minimum width 93 inches
d. Minimum weight 6,500 lbs
2. Frame:
a. 6 inch channel with gussets at all stress points and welds.
b. Front and rear bumpers constructed of 2” x 6” steel tubing.
c. Certified OSHA approved roll over protections meeting ISO 3471/:1994.
3. Brakes and Safety Equipment:
a. Dynamic brake and hydraulic brakes required
b. Parking brake(w. warning light & buzzer) needs to be cable driven to disk type.
c. Vandal protection required
C. Engine Requirements
1. Four (4) cylinder diesel engine required
2. Minimum 74 HP
3. 95 – amp alternator
4. 12 – volt electric system
5. A minimum 30 – gallon fuel tank
6. Safety shut down engine feature
7. Dry type two-stage air cleaner with extension air cleaner stack required.
8. Heavy-duty radiator cooling system required
D. Drive Train and Steering
1. Front wheel drive and rear wheel fully hydraulic steering required with orbital type steering.
2. Propelled with two (2) speed hydrostatic system with foot pedal controls, forward and reverse. Hydrostatic pump driven motor with hot oil shuttle built in, under a variable speed.
3. Neutral shift capability for towing.
4. Maximum turning radius 72 inches.
IFB No. F2027058 Page 4
5. Four (4) 15” manufacture standard tires; identical mounted spare required. (All wheels/tires must be interchangeable)
6. Dead engine steering capability.
7. Heavy duty rear steer, oscillating rear straight axle required.
8. Closed loop transmission
E. Hydraulic System
1. Minimum 20 gallon reservoir
2. Return tank filter
3. High pressure hydraulic spin on filter is required
4. 28 gpm pump with pressure compensated load, with variable displacement.
5. Hydraulic oil cooler
6. Main manifold located outside of operator compartment
7. Tank minimum capacity of 22 gallon with sight level gauge
8. Tank cartridge 10 micron, located on the return line.
F. Brush
1. Minimum inner diameter of 10 inches and maximum outer diameter of 32 inches.
2. Minimum length of 8 feet (wafer type)
3. Poly/steel mix required
4. Core must be one piece welded steel
5. Quick-change configuration required
6. Heavy duty shock absorbers installed on core support for balanced purposes.
7. Full length rubber deflecting shield
8. Fully powered electronic hydraulic motor and adjustable to 30 degrees minimum left to right.
9. Must have the following shift selector and electronic joystick control for all brush functions:
a. Up and down
b. Side to side
10. Guard must be a full length heavy-duty reinforced steel with shield.
11. Dust suppression system must have a spray bar with cleanable and or replaceable spray tips. Must have a minimum 145-gallon ply water tank that includes drains for winter with a 12 – volt pressurized water pump with strainer.
12. Metal shield covering 140 degrees w/steel end plates.
13. Sweeping angle up to 45 degrees steer both sides left and right mounter under cabin
14. 3-point support for the sweeper
15. Brush side shifting 12” to 18” minimum
G. Cab and Miscellaneous items required
1. Must have full visibility on all sides
IFB No. F2027058 Page 5
2. Must have tinted safety glass
3. Pressurized cab with heat and air conditioning required.
4. Brush Water System
5. 7 ½” ft front blade scraper
6. 2 head lights for the front and 2 head lights for the rear
7. Turn signal lights
8. Stop light
9. Instrument panel gauges must be lighted and should include the following:
a. Oil pressure
b. Coolant temperature
c. Fuel
d. Hour
e. Amps/volts
f. Tachometer
10. Required front and rear windshield wipers with washer
11. Horn and backup alarm
12. All gauges on one common dash, located to the right of the operator seat.
13. Throttles adjust from dash panel.
14. Back-up camera & display
15. Tilt & telescoping steering column
16. Electronic controlled brush speed
17. 4 heavy duty tie downs
18. Breakaway west coast style mirrors preferred
19. Work, front, and rear, stop, tail, turn and emergency flasher lights required.
20. Operator seat with suspension height adjustment
21. Turning radius is required to be a maximum 13 feet
22. Front axle shall be 5000 lb minimum capacity, oscillating type with hydraulic brakes.
23. Rear axle required to be heavy duty ¾” ton capacity, truck type with leaf spring suspension, powered by variable speed hydrostatic motor.
a. Minimum speed 32 mph, with hydraulic brakes
24. Tires ST225/75R15 load range D minimum. 6 bolt wheels
IFB No. F2027058 Page 6
TECHNICAL SPECIFICATIONS FOR ROAD CONSTRUCTION SWEEPER MID-MOUNTED
WITH FRONT BLADE
A. Awarded vendors must provide equipment that meets or exceeds the following specifications at a minimum for Self-Propelled Center Sweeper Broom with Front Blade.
B. General Requirements:
1. Dimensions:
a. Minimum height 91 inches
b. Minimum length 186 inches
c. Minimum width 93 inches
d. Minimum weight 5,700 lbs
2. Frame:
a. 6 inch channel with gussets at all stress points and welds.
b. Front and rear bumpers constructed of 2” x 6” steel tubing.
c. Certified OSHA approved roll over protections meeting ISO 3471/:1994.
3. Brakes and Safety Equipment:
a. Dynamic brake and hydraulic brakes required
b. Parking brake(w. warning light & buzzer) needs to be cable driven to disk type.
c. Vandal protection required
C. Engine Requirements
1. Minimum is a tier 4 Final
2. Four (4) cylinder diesel engine required; air cleaner (Minimum 4.5L) element dry – type with turbine rotary type pre-cleaner
3. Minimum 74 HP
4. 95 – amp alternator
5. 12 – volt electric system
6. A minimum 30 – gallon fuel tank
D. Drive Train and Steering
1. Closed loop transmission.
2. Variable speed, hydrostatic pump driven.
3. Neutral shift capability for towing.
4. Hydrostatic motor with hot oil shuttle built in.
5. Foot control for forward and reverse travel. One pedal for forward, one pedal for reverse.
6. Dynamic brake.
E. Hydraulic System
1. 28 gpm pump with pressure compensated load, with variable displacement.
IFB No. F2027058 Page 7
2. Hydraulic oil cooler
3. Main manifold located outside of operator compartment
4. Tank minimum capacity of 22 gallon with slight level gauge
5. Tank cartridge 10 micron, located on the return line.
F. Brush Core
1. Minimum length of 8 feet (wafer type)
2. Powered by hydraulic motor with electronic speed.
3. Heavy duty shock absorbers installed on core support for balanced purposes
4. Full length rubber deflecting shield
5. Metal shield covering 140 degrees w/steel end plates
6. Sweeping angle up to 45 degrees steer both sides left and right mounter under cabin
7. 3-point support for the sweeper
G. Steering:
1. Hydraulic power steering with orbital type steering
2. Dead engine steering capability
H. Parking Brake:
1. Cable driven to disk type
I. Other Requirements:
1. Brush Water System
2. 7 ½” ft front blade scraper
3. 2 head lights for the front; 2 head lights for the rear
4. Turn signal lights
5. Stop light
6. Backup alarm
J. Instruments:
1. All gauges on one common dash located to the right of the operator seat
2. Throttle adjust from dash panel.
3. Shift selector and electronic joystick control for all brush functions
4. Electronic controlled brush speed K. Turning Radius:
1. Turning radius is required to be a maximum 13 feet L. Axles:
1. Front axle shall be 5000 pound minimum capacity, oscillating type with hydraulic brakes
2. Rear axle required to be heavy duty ¾” ton capacity, truck type with leaf spring suspension, powered by variable speed hydrostatic motor. Minimum speed 32 mph, with hydraulic brakes.
3. Tires ST225/75R15 load range D minimum (6 bolt wheels)
File details come from the government source that posted it. Updated .