F2027054 - Statement of Work.pdf

PDF 177 KB Posted

Attached to
Purchase of 14-Yard Dump Trucks
Solicitation number
F2027054
Issued by
Tarrant County, Texas

About this file

This Statement of Work is issued by Tarrant County, Texas for the purchase of fourteen-yard tandem dump trucks on vocational chassis designated for use by Precincts 2, 3, and 4. The solicitation (IFB No. F2027054) seeks to procure equipment that meets or exceeds all federal and state safety, health, lighting, and noise regulations, as well as Environmental Protection Agency emission requirements at the time of bid submission. Award will be made to the lowest responsible bidder whose equipment meets or exceeds the detailed specifications provided. The awarded vendor must be a full-service dealer capable of providing all service and repairs on the offered equipment and must include all delivery costs in the base price, with equipment to be delivered fully assembled and ready for use.

The Statement of Work establishes comprehensive technical specifications covering frame requirements (one-piece design with minimum 120,000 psi yield strength and 54,600 lbs GVWR), front and rear axle configurations, suspension systems, braking components, and a diesel-powered turbocharged engine with minimum 400 SAE horsepower and 1,450 ft-lb torque. The dump body must be a Warren-style 14-cubic-yard capacity unit painted green with specific interior dimensions and construction materials. Additional requirements include an Allison 4000 RDS-P transmission, cab features with air suspension seating, factory-installed HVAC and entertainment systems, electric tarp system, bed vibrator system, and comprehensive safety equipment including LED strobe lights and backup alarms. Bidders are requested to submit detailed specification sheets and warranty information (standard warranty preferred, with extended warranty of minimum 60 months/150,000 miles and 6-month tarp system coverage preferred). No specific bid due date, award date, or contract term is provided in this document.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

IFB No. F2027054 Page 1

STATEMENT OF WORK

I. BACKGROUND

A. Tarrant County is requesting bids for the purchase of 14 yd Tandem Dump Trucks on Vocational Chassis. This purchase is for Precinct 2, Precinct 3 and Precinct 4.

B. Tarrant County intends to award to the lowest responsible bidder who meets or exceeds specifications based on price of the equipment including standard warranty and delivery costs.

II. GENERAL REQUIREMENTS

A. Awarded vendor must provide equipment that meets or exceeds all Federal and State of Texas safety, health, lighting, and noise regulations. Offered equipment must meet this requirement at time of bid submission

B. Awarded vendor must provide equipment that meets or exceeds all Environmental Protection Agency (EPA) emission requirements. Offered equipment must meet this requirement at time of bid submission

C. Awarded vendor must not begin production of requested equipment before receiving a Tarrant County purchase order.

D. Bidders must be a full-service dealer capable of all service and repairs on offered equipment.

E. It is preferred that Bidders include standard warranty information with their bid submission. Tarrant County reserves the right to require that vendors provide this information before proceeding with award.

F. It is preferred that Bidders include extended warranty information with their bid submission. Tarrant County reserves the right to require that vendors provide this information before proceeding with award. Extended warranty must be 60 months/150,000 miles at a minimum, Tarp System 6 months, at a minimum.

G. It is preferred that Bidders include a detailed specification sheet with their bid submission. Specification sheets must include references to all specifications included in this Statement of Work at a minimum. Tarrant County reserves the right to require that vendors provide this information before proceeding with award.

III. DELIVERY REQUIREMENTS

A. Awarded vendor must include all delivery costs in base cost of the equipment.

B. Awarded vendor must deliver equipment fully assembled and ready to use.

C. Awarded vendor must not delete any equipment that is included as standard by the equipment manufacturer from delivered equipment.

IFB No. F2027054 Page 2

D. Awarded vendor must provide an operator’s manual for offered equipment at time of delivery. Tarrant County will accept a digital operator’s manuals for Service, Parts, Wiring manuals for dump bed, hoist, pump, and vibrator.

E. Awarded vendor must not include decals or advertisements on delivered equipment. The exception to this requirement are manufacturer standard markings.

IV. EQUIPMENT REQUIRMENTS:

A. Frame:

1. Frame rails must be of a one-piece design.

2. Frame Width: 10-3/4 inches minimum

3. Yield strength: 120,000 psi minimum

4. Resisting bending moment (RBM): 2.1 million in.-lb minimum

5. Cab-to-axle (CA) dimension: 120 inches minimum

6. Gross Vehicle Weight Rating (GVWR): 54,600 lbs minimum

B. Front Axle:

1. Front axle capacity: 14,600 lbs minimum.

2. Must be equipped with power steering.

3. Must be equipped with double-acting hydraulic shock absorbers.

4. Must be a setback wide-track design

5. Front wheel hubs

a. Stemco type or approved equal

b. Equipped with wet-type wheel-bearing oilers with sight glass

C. Front Suspension:

1. Front suspension capacity: 14,600-lb. minimum

2. Must utilize multi-leaf springs.

D. Rear Axle:

1. Meritor MT-40-14X or approved equal.

2. Rear axle capacity: 40,000 lbs minimum

3. Configuration:

a. Must have full tandem power divider with automatic traction control.

b. Off-road operation and highway speed:

i. Maximum: up to 75 mph

IFB No. F2027054 Page 3

4. Drive Axles:

a. Equipped with an internal lubrication pump.

b. Equipped with magnetic fill and drain plugs.

c. Electronic Stability Control (ESC) system

E. Rear Suspension:

1. Air-ride suspension or approved equal

2. Equipped with a truck hitch

3. Rear suspension capacity: 40,000-lb minimum

F. Brakes:

1. All brakes must be equipped with brake dust covers

2. Front and Rear Axles:

a. Equipped with disc brakes

3. Braking System:

a. Must be air-operated

b. Must include anti-lock braking (ABS)

c. Must include automatic slack adjusters

4. Parking Brakes:

a. Rear Axle:

i. Must be spring-set

ii. Must be Air-released

5. Air compressor Output: 18.0 CFM minimum

a. Air System:

i. Spin-on Filter:

aa. Bendix AD-IP style or approved equal

b. Must include a heated air dryer with moisture ejector.

G. Engine:

1. Must be Diesel powered

2. Must be Water-Cooled

3. Must be turbocharged

4. Equipped with Air-to-Air charge cooler

5. Design:

a. Must be Electronically controlled diesel

IFB No. F2027054 Page 4

b. Must have six-cylinders, inline

c. Engine Idle Shutdown Timer: 15 minutes, minimum

6. Engine Output:

a. Horsepower: 400 SAE minimum

7. Engine Displacement: 14 liters minimum

8. Engine Torque: 1,450 ft-lb. minimum

H. Exhaust System

1. Must have a single vertical exhaust stack

a. Height must not extend the height of dump bed

b. Must include Heat Shield Protection

I. Fuel Tanks

1. Material: Aluminum or approved equal

2. Fuel capacity: 100 gallons minimum

3. Fuel Tank Design:

a. Operator Access:

i. Entry Steps: 2 minimum

4. Placement:

a. Mounted on Driver’s Side:

i. Fuel Tank

ii. DEF Tank

iii. Battery Box

J. Engine Equipment

1. Must have adjustable electronic throttle

a. Must have cruise control integrations

2. Maximum Electronically Governed Speed: 75 mph

3. Radiator:

a. Must be heavy-duty

b. Maximum Cooling Capacity offered by manufacturer.

c. Must have External Fuel/Water Seperator

4. Oil Pan:

a. Minimum Ground clearance: 16 inches

IFB No. F2027054 Page 5

K. Transmission

1. Must be an Allison 4000 RDS-P or approved equal

a. Six-speed close-ratio automatic transmission

b. Equipped with hot-shift PTO provisions

2. Must include an oil cooler

3. Must include oil temperature warning light or approved equal

4. Power Take Off (PTO):

a. Adjustable Operating Speed: 1,000 RPM maximum

b. Must be controlled through the engine ECM

c. On/Off switch installed on the dashboard.

L. Cab and Equipment

1. Cab Exterior:

a. Paint Color: White

b. Must include a tilting fiberglass hood

c. Must include tilting fiberglass fenders

d. Windshield Wipers and Washers:

i. Electric-powered intermittent, placed on each side

e. Cab Doors:

i. Automatic door locks on each side

ii. Power windows on each side

iii. Heavy-duty grab handle on each side

iv. Electric Mirrors with four-way adjustment:

a. Aero- type Power Mirrors or approved equal

b. Non-adhesive convex mirrors or approved equal

f. Driver and Passenger Cab Access:

i. Steps: minimum two-step entry

2. Cab Interior:

a. Must be fully insulated

b. Must include an air horn

c. Must have an air suspension system.

d. Sun visors placed on each side

IFB No. F2027054 Page 6

e. Interior Trim:

i. Vinyl upholstery panels

ii. Door pockets

iii. Headliner

f. Driver and Passenger Seating:

i. Boston, National, or approved equal

ii. Air-Suspension

iii. High-Back

iv. Seat Belts

v. Arm Rests

3. Tinted Safety Glass Placements:

a. Driver Door

b. Passenger Door

c. Rear Window

4. Cab Equipment

a. Factory-installed AM/FM radio with Bluetooth capabilities

b. Factory-installed HVAC

c. Factory Cabin Filter

d. Factory-installed 12-volt power outlet

e. Factory-installed USB Port

f. Factory Installed Color Display: 7 inches minimum

i. Must be powered by ignition

ii. Must include anti-glare and anti-scratch protection

5. Dashboard Configuration:

a. Minimum Mounted Switches: two (2) pre-wired

i. Circuit: minimum 20-amp circuit

ii. Circuit Breaker Voltage: minimum 12-volts wired through the ignition

IFB No. F2027054 Page 7

6. Cab Safety:

a. Must include a 5-lb. ABC fire extinguisher with quick release holder

i. Rated 2A:10BC

b. Must include a DOT-approved roadside emergency reflective safety triangle kit

M. Gauges and Instruments

1. Panel Design

a. Speedometer

b. Tachometer

c. Voltmeter

d. Engine oil pressure gauge.

e. Water temperature gauge.

f. Fuel and DEF gauge.

g. Dual air pressure gauges.

h. Air filter restriction indicator gauge.

i. Low air pressure warning light with audible buzzer.

j. Engine shutdown system with override capabilities.

i. Must provide manuals for operating parameters that include

Limited, Derated, and Shutdown functions.

k. Transmission oil temperature gauge.

N. Wheels & Tires

1. Wheels

a. Color: Painted White

b. Minimum Wheel Size: 22.5 inch x 8.25 inch

c. Wheel Disc Material: Steel or approved equal

d. Type: 10-hole, hub-piloted,

2. Tires

a. Front Tires:

i. Tire Size: 12R22.5, 16-ply radial or approved equal

ii. Goodyear G751 MSA or approved equal

IFB No. F2027054 Page 8

b. Rear Tires:

i. Tire Size: 11R22.5, 14-ply radial or approved equal

ii. Goodyear G182 RSD or approved equal

O. Dump Body

1. Warren-style body or approved equal

2. Capacity: 14 cubic yards

3. Color: Green

4. Interior Dimensions:

a. Minimum Length: 14 feet

b. Minimum Width: 7 feet, 3 inches

c. Hinge pins must be equipped with greaseable zerk fittings.

5. Dump Body Sides:

a. Material: High-tensible steel, or approved equal

i. Minimum Gauge: 10

ii. Minimum Yield Strength: 50,000 psi

6. Side Configuration:

a. Must be a two-piece design with full tailgate-height side boards.

b. Minimum Side-to-floor Radius: 3 inches

c. Full-length rails:

i. Maximum slope: 30 degrees

d. Side Braces and Corner Posts

i. Must be box-type construction

e. Welded Attachments to Rub Rail:

i. Handles

ii. Steps

iii. Hooks

7. Side Boards:

a. Full-length Sideboards:

i. Material: Steel or approved equal

ii. Must be mounted flush with gussets

IFB No. F2027054 Page 9

8. Floor

a. Material: High-tensible steel, or approved equal

i. Minimum Gauge: 10

ii. Minimum Yield Strength: 50,000 psi

b. 4-inch structural cross members:

i. Minimum Weight: 5.4 lbs. per foot

c. 7-inch structural long sills:

i. Minimum Weight: 6.7 lbs. per foot

d. Demolition Overlay:

i. Minimum number of plates: 3

ii. Minimum Thickness: 16-inch

e. Electric Tarp System:

i. Fabric: Asphalt-grade Tarpaulin or approved equal

a. Consisting of nylon-reinforced vinyl coated on both sides.

ii. Minimum fabric weight: 14 oz P. Bed Vibrator System

1. Cougar DC Truck Vibrator or approved equal

2. Minimum Voltage: 12-volt

3. Must include a circuit-breaker-protected electrical circuit with solenoid integrations.

4. Must include a push-button activation switch

5. Placement

a. The bed vibrator must be mounted on a welded plate behind the doghouse, between the dump body frame rails and to the rear of the hydraulic cylinder.

6. Bed Vibrator:

a. Minimum Electrical Capacity Amp: 85

b. Minimum Operating Speed: 4,000 RPM

c. Minimum Force capacity: 3,200 lbs.

d. Push-button activation switch must be mounted in the PTO dump bed control tower.

IFB No. F2027054 Page 10

Q. Tail Gate:

1. Must be fully boxed

2. Must be double action

3. Must be air operated

4. Must include cab-mounted controls

5. Demolition Overlay:

a. Minimum number of plates: 3

b. Minimum Thickness: 16-inch

6. Material: High-tensible steel, or approved equal

a. Minimum Gauge: 10

b. Minimum Yield Strength: 50,000 psi

7. Structure:

a. Minimum Cross Braces (vertical): Two (2), 5-inches

b. Minimum Cross Braces (horizontal): Two (2), 5-inches

8. D-ring Placement:

a. Welded to the inside top center

9. Hardware mounted to rib columns

a. Heavy-duty offset hinges: one (1) per side

b. 3/8-inch chains: one (1) per side

c. Hooks, keyhole chain slots, or approved equals: 4 minimum

10. Tailgate Locking:

a. Lever Linkage

i. Adjustable provisions on both sides of the rear body

11. Cab Protection

a. Material: Reinforced steel, or approved equal

i. Minimum Gauge: 10

b. Must include triangular reinforcement plates.

12. Asphalt Spreader Apron

a. Material: Steel or approved equal

i. Minimum Thickness: 1/4-inches

ii. Minimum Width: 10 inches wide.

b. Gussets placed on each side

c. Minimum Rear Body Slope: 22.5 degrees

IFB No. F2027054 Page 11

d. Must be compatible with chip spreader boxes and asphalt pavers

13. Hoist and Lift Cylinder:

a. Hoist

i. Front mounted telescopic subframe

ii. Rating: NTEA Class 120 or greater

iii. Pump Material: Steel, Cast-iron, or approval

b. Hoist Control System Operations:

i. Functionality: Raise, Hold, Feather, and Lower

ii. Automatic kick-out functionality.

R. Auxiliary Equipment:

1. Electrical System

a. Must have external battery jump terminals

b. Must have master battery disconnect switch

2. Hydraulic Reservoir

a. Accessible Liquid-level sight glass

3. Hydraulic Tank:

a. Secured Ball-valve shutoff, with wire ties

b. Outside mounted tank

4. Hydraulic System

a. Diverter controls mounted in cab.

b. Rear-mounted quick-connect fittings located below dump body.

5. Power Take-Off Operation System (PTO):

a. Direct-mount PTO and pump assembly

b. Air-Operated

c. Mounted Control Tower

d. Four-Way Valve functionality

i. Raise, Hold, Feather, and Lower functions.

6. Power Take-Off Housing

a. Material: Cast Iron, Steel, or approved equal

IFB No. F2027054 Page 12

b. Chelsea, Muncie, or approved equal

7. Mud Flap Placement:

a. Must be installed behind the rear wheels

8. Rock Guards

a. Material: Steel, or approved equal

i. Minimum Gauge: 10

b. Must be mounted in front of tandem wheels

9. Safety Equipment

a. PTO Warning light

b. PTO raised-bed warning label

c. Dump Body Safety:

i. Minimum Safety Struts: two (2) safety struts

d. Recessed DOT-approved red and white conspicuity tape

i. Safety Tape Placement:

a. Applied to body sidewalls, avoiding rub rails or ribs

e. LED Lights and Wiring:

i. LED Strobe Placement and Wiring:

a. Model CD3802AB or approved equal

b. Must have ability to be operated by dedicated rocker switch in cab

c. Wired to constant power source

d. Placement:

i. Front grille

ii. Rear of dump body

iii. Left-side light to display blue warning light.

iv. Right-side light to display amber warning light.

IFB No. F2027054 Page 13

ii. Dump Body Electrical Wiring Placement:

a. Wiring must be placed in Protective Conduit

b. Must Run along

i. Front to Rear

ii. Side to Side

iii. Top to Bottom

iii. Fixtures mounted flush with rubber gronments

iv. Rear Lights:

a. Recessed Inside Truck Frame Rails: 2 inches minimum

b. Package:

i. Stop/Turn/Tail Lights Minimum: Two (2), Red, 2 inches x 6 inches

ii. Marker Lights Minimum: Three (3),Red

2.5 inch

iii. White Reverse Light Minimum: Two (2), 4 inches

f. Backup Alarm Rating: 107 dB maximum

g. Exterior Ladder:

i. Minimum Steps: Two (2)

ii. Function: Fold-up, Slide-In, Latching

iii. Placement: Installed beneath left front corner of dump body

h. Additional Interior Ladders:

i. 2 minimum

ii. Placement: Located at the same corner as the exterior ladder

i. Additional access steps:

i. Non-Slip

ii. Placement: Installed on side of body

j. Single Rear-View Camera:

i. Must be housed in a protective enclosure

a. Material: Steel, or approved equal

File details come from the government source that posted it. Updated .