F2027046 Technical Specifications.pdf

PDF 255 KB Posted

Attached to
Purchase of Pneumatic Compactor
Solicitation number
F2027046
Issued by
Tarrant County, Texas

About this file

This technical specifications document pertains to Tarrant County, Texas's procurement of an eight-wheel pneumatic compactor. The specifications define the detailed requirements for the equipment, including operational capacity, performance standards, and design features that the compactor must meet. The document establishes minimum thresholds for refuse compaction capability, chassis specifications, engine requirements, and hydraulic system parameters to ensure the equipment meets the county's operational needs for solid waste management.

The specifications include requirements for compactor body dimensions, hopper capacity, compaction force, and refuse ejection mechanisms. Additional specifications address safety features, compliance with applicable standards and regulations, warranty provisions, and delivery requirements. Pricing and payment terms, as well as any applicable set-asides or incumbent contractor preferences, would be addressed in the associated solicitation document rather than in the technical specifications.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

IFB No. F2027046 Page 1

Technical Specifications

I. BACKGROUND

A. Tarrant County is requesting bids for the purchase of an eight (8) wheel pneumatic compactor.

B. Tarrant County intends to award to the lowest responsible bidder who meets or exceeds specifications based on price of the equipment including standard warranty and delivery costs.

II. GENERAL REQUIREMENTS

A. Awarded vendor must provide equipment that meets or exceeds all Federal and State of Texas safety, health, lighting, and noise regulations. Offered equipment must meet this requirement at time of bid submission

B. Awarded vendor must provide equipment that meets or exceeds all Environmental Protection Agency (EPA) emission requirements. Offered equipment must meet this requirement at time of bid submission

C. Awarded vendor must not begin production of requested equipment before receiving a Tarrant County purchase order.

D. Bidders must be a full-service dealer capable of all service and repairs on offered equipment.

E. It is preferred that Bidders include standard warranty information with their bid submission. Tarrant County reserves the right to require that vendors provide this information before proceeding with award.

F. It is preferred that Bidders include extended warranty information with their bid submission. Tarrant County reserves the right to require that vendors provide this information before proceeding with award. Extended warranty must be for 5 years / 3,000 hours at a minimum.

G. It is preferred that Bidders include a detailed specification sheet with their bid submission. Specification sheets must include references to all specifications included in this Statement of Work at a minimum. Tarrant County reserves the right to require that vendors provide this information before proceeding with award.

IFB No. F2027046 Page 2

III. DELIVERY REQUIREMENTS

A. Awarded vendor must include all delivery costs in base cost of the equipment.

B. Awarded vendor must deliver equipment fully assembled and ready to use.

C. Awarded vendor must not delete any equipment that is included as standard by the equipment manufacturer from delivered equipment.

D. Awarded vendor must provide an operator’s manual for offered equipment at time of delivery. Tarrant County will accept a digital operator’s manual.

E. Awarded vendor must not include decals or advertisements on delivered equipment. The exception to this requirement are manufacturer standard markings.

IV. EQUIPMENT REQUIREMENTS

A. Operating Weight: 20,000 pounds minimum

B. Operating Weight: 60,000 pounds maximum

C. Equipment Width: 93 inches maximum

D. Compaction Width: 80 inches minimum and 82 inches maximum

E. Inside Turning Radius: 245 inches maximum

F. Ground Clearance: 11 inches minimum

G. Engine:

1. Horsepower: 130 minimum

2. Fuel Tank Capacity: 60 gallons minimum

3. Inline 4-cylinder turbo diesel

4. Liquid cooled

5. Volt: 12 or 24

6. Alternator: 80 amp minimum

H. Drive System:

1. 2 speed Hydrostatic Drive

2. Travel Speed: 12 mph minimum

I. Tires:

1. Computer controlled automatic tire inflation system

2. Tire Size: 13/80 R20

IFB No. F2027046 Page 3

J. Instruments:

1. Park Brake Warning Light

2. Volt and Amp Meter

3. Hour Meter

4. Engine Warning Lights with audible alarm

K. Safety:

1. Service and Park brakes

2. Rollover Protection System (ROPS)

3. Backup Alarm

4. Seatbelt

5. Horn

6. Front and rear work lights

7. Ignition powered Backup camera

8. Blue / Amber strobe light

L. Chassis

1. Cab: Full Canopy

2. Locking Engine compartments

3. Suspension seat with rotation and slide

M. Additional:

1. Spare Tire Mounted on rim

2. 2 complete set of filters for maintenance service including hydraulics

File details come from the government source that posted it. Updated .