F2027043 - Technical Specifications.pdf
PDF 110 KB Posted
- Attached to
- Purchase of Cardboard Baler
- Solicitation number
- F2027043
- Issued by
- Tarrant County, Texas
About this file
Summary of Technical Specifications for Cardboard Baler Purchase
This document contains technical specifications prepared by Tarrant County, Texas, for the procurement of a replacement cardboard baler for the Tarrant County Recycling Center. The project encompasses the purchase of a new cardboard baler unit along with the uninstallation and removal of the existing equipment. The specifications outline the required capabilities, features, and performance standards for the replacement baler to ensure it meets the operational needs of the recycling center's cardboard processing and baling operations.
The technical specifications detail the equipment requirements, including capacity, dimensions, operational features, safety components, and any ancillary systems necessary for proper installation and operation at the recycling center facility. The specifications serve as the baseline criteria against which submitted bids will be evaluated, ensuring that all bidders understand the minimum acceptable standards and functional requirements for the equipment being procured. Additional project details regarding bid submission deadlines, site visit availability, pre-bid meetings, and award timelines should be referenced in the primary solicitation documents.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL SPECIFICATIONS
IFB No. F2027043 Page 1
I. BACKGROUND
A. Tarrant County is requesting bids for the replacement of a cardboard baler at the Tarrant County Recycling Center.
B. Project includes the uninstallation and removal of current baler.
II. RESPONSE SPECIFICATIONS
A. Bidders must bid on all items to be considered for award.
B. Bidders must include all delivery costs in installation pricing. Delivery and installation costs include, but are not limited to, labor, travel, removal of current equipment, fuel and freight.
C. Bidders must provide warranty information with their submitted responses.
D. Tarrant County reserves the right to require additional information deemed necessary to evaluate the qualifications of a respondent.
E. Bidders shall attach oil system and electrical system requirements in their responses.
F. Bidders must upload a vendor quote form and a product specification sheet.
III. EQUIPMENT REQUIREMENTS
A. Baler offered by vendor must meet or exceed the following specifications:
1. Must be an open-end automatic shear baler
2. Must have an auto-tie system
3. Must have a wire run-out sensor
4. Must have a 5-foot bale slide
5. Must have high-temperature and low-oil alarms
6. Must have an inserter automated lubrication system
7. Must have a minimum total press weight of 25,350 pounds
8. Must have a nominal hopper size of 30 inches x 30 inches
9. Must have 5 bale ties
10. Must have a heavy-duty oil cooler
11. Must have a bale chamber with hinged access door and safety interlock
12. Must have a feed hopper with hinged access door and safety interlock
13. Must produce bale size of 30 inches wide x 40 inches deep x variable length
14. Must have a programmable controller
15. Must have feeder hopper with hinged access door and safety interlock
16. Must have nyloil side and bottom ram wear blocks
17. Must have totally enclosed fan-cooled (TEFC) motors and be suitable for industrial environments
18. Must have a 208-220/440-550V, 3-phase, 60Hz electrical system
19. Must have ethernet remote access VPN
20. Must have fire detection device
21. Must have oil heater
22. Must have full bale slide alarm
TECHNICAL SPECIFICATIONS
IFB No. F2027043 Page 2
23. Must have remote baler controls on pedestal
24. Must have remote touchscreen on bale chamber
25. Must have additional 5-foot bale slide
IV. UNINSTALLATION OF EXISTING EQUIPMENT AND INSTALLATION OF NEW
EQUIPMENT REQUIREMENTS
A. Awarded vendor is solely responsible for the provision of labor and materials to uninstall existing equipment and install new equipment.
B. Awarded vendor must establish and coordinate with Facilities point of contact for installation scheduling.
V. AWARD
A. Must bid on all items to be considered for award B. Award will be made to the lowest bidder meeting specifications
| I. BACKGROUND |
| II. RESPONSE SPECIFICATIONS |
| III. EQUIPMENT REQUIREMENTS |
| IV. UNINSTALLATION OF EXISTING EQUIPMENT AND INSTALLATION OF NEW EQUIPMENT REQUIREMENTS |
| V. AWARD |
File details come from the government source that posted it. Updated .