Master_Project_Schedule_for_AFTC_HQ_Remodel_Project.pdf

Master Project Schedule for AFTC HQ Remodel Project

Required moving tasks are itemized as follows, but may not necessarily occur in the exact sequence shown:

General:

1. Deliver the required number of moving boxes to each organization for pre-packing (1) week prior to their scheduled move date.

2. Meet with the Government representative to review room layouts and resolve potential installation problems prior to start of any work.

3. Ensure that all furniture assemblies are level, square, and aligned with adjoining furniture, and that drawers and cabinet doors operate smoothly after installation.

4. Clear all residual packing materials, trash, and debris from contractor work areas. Sweep floors and vacuum carpets in the work area and adjacent corridors as necessary to remove soil resulting from contractor activities.

Stage I Moves:

1. Move AFTC/DP file/storage cabinets with contents and refrigerator from Rm 237A to Rm 244 in Bldg 1.

2. Move excess file/storage cabinets from Rm 237A to on-base location TBD.

3. Move one (1) conference room set, including table, chairs, podium, and associated items, from Rm 228 in Bldg 1 to on-base location TBD.

4. Move four (4) AFTC/DP personnel, including computers, files, and personal items, from Rm 240 to Rm 244 and rooms TBD in Bldg 1.

5. Move one (1) private office set from Rm 100 in Bldg 1 to Bldg 3700.

6. Move five (5) AFTC/SE personnel, including computers, files, and personal items, From Rm 238 in Bldg 1 to Bldg 3700.

7. Move refrigerator, printer, file/storage cabinets, and contents from Rm 238 in Bldg 1 to Bldg 3700.

8. Move one (1) AFTC/JA personnel, including computer, files, and personal items, from Rm 114 to Rm 118 in Bldg 1.

9. Move one (1) private office set in Rm 114 in Bldg 1 to end of room and cover with protective sheeting.

10. Dismantle two (2) modular workstations in Rm 240 in Bldg 1, stack clear of designated work area, and cover with protective sheeting.

11. Dismantle four (4) modular workstations and one (1) modular reproduction area in Rm 238 in and move components to Rm 104A in Bldg 1 and/or CONNEX container located near Bldg 1.

Stage II Moves:

1. Move two (2) AFTC/DP personnel, including computers, files, and personal items, from rooms TBD to Rm 240 in Bldg 1.

2. Uncover and set up one (1) private office set in Rm 114 in Bldg 1.

3. Move one (1) AFTC/JA personnel, including computer, files, and personal items, from Rm 118 to Rm 114 in Bldg 1.

4. Move one (1) private office set with bookcases from Rm 226 to Rm 114A in Bldg 1.

5. Move one (1) AFTC/JA personnel, including computer, files, and personal items, from Rm 226 to Rm 114A in Bldg 1.

6. Move six (6) AFTC/EN personnel, including computers, files, and personal items, from Rm 106 to Rm 238 in Bldg 1.

7. Move plotter, printer, shredder, file/storage cabinets, and contents from Rm 106 to Rm 238 in Bldg 1.

8. Move one (1) conference table from Rm 104A in Bldg 1 to on-base location TBD.

9. Move one (1) conference table from on-base location TBD to Rm 104A in Bldg 1.

10. Dismantle one (1) workstation in Rm 106 and reproduction area in Rm 110 in Bldg 1 and stack clear of designated work area.

Stage III Moves:

1. Move five (5) AFTC/SE personnel, including computers, files, and personal items, From Bldg 3700 to Rm 106 in Bldg 1.

2. Move refrigerator, printer, file/storage cabinets, and contents from Bldg 3700 to Rm 106 in Bldg 1.

3. Move two (2) AFTC/XP personnel, including computer, files, and personal items, from Rm 116 to Rm 104A in Bldg 1.

4. Move one (1) AFTC/XP personnel, including computer, files, and personal items, from on-base location TBD to Rm 118 in Bldg 1.