Parts_Washer_6036_Aircraft_Wheel_Washer_SPEC_Sheet.pdf

PDF 76 KB Posted

Attached to
Aircraft Wheel Washer
Solicitation number
F1S1AB8017B003-1
Issued by

View the file

Other files

File Type Posted
RESOLICITATION_-_Modification_1.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Green Technology: Closed Loop Zero Discharge & High Efficiency Swing Door Retracting Turntable for Maximum Access Stainless Steel Cabinet & Wetted Standard Components Automatic Electronic Water Level Control & Refill Heavy gage 304 Stainless Steel 3/16" Cabinet Thickness Easy Service Front Suction Strainer Stainless Steel Appointed Pump with Chemically Resistant Viton Seals Adjustable Electronic Temp Control, Temp Gage Auto Heated Fresh Water Rinse Cycle Control Transformer External of Panel minimizes Heat Auto Steam Exhaust System Programmable 24/7 Clock for Heating & Skimmer Auto Programmable Oil Skimmer System Low Water Shut-Off Protects Pumps & Heating System Engineered Wheel Wash Power Blast Manifold Electronic Door Safety Interlock Oscillating Blast Non-Synchronous to Turntable to Maximize Cleaning Wash Cycle Timer with Auto Reset Removable Internal Reservoir Cover allows Full Access 230 V or 460 V- 60 Hz 3-Phase with 120 V Controls 4 Station Aircraft Wheel Fixture - Optional Sizes Chemical Resistant Two Part, 3 mm Epoxy Coating

Spray Manifold: Overall Dimensions: Work Area Dimensions:

OSCILLATING NON- SYNCHRONOUS Width: (Std Unit) 106 inches Turntable Diameter: 60 inches Angle of Oscillation: 39 degrees Depth: (Std Unit) 106 inches Work Height: 36 inches Frequency of Oscillation: 4 per minute Height: 93 inches Table Load Capacity: 2,000 lbs Number of Wash Nozzles: 20 Empty Weight: 8210 lbs Type of Nozzle: Vee-Jet Reservoir Capacity: 397 gallons Nozzle Material: 316 Stainless Sludge Capacity: 80 gallons

Heat System: Electrical:

Operating Temperature: 140 - 190 degrees F Wiring Standard: NFPA 79 Motor Rating: Continuous Duty Initial Heat-Up Time: 70 - 100 minutes Motor Starters: Across the line Motor Enclosures: TEFC Electric Heat Element Size: 80 kW Short Circuit Protection: Std Electrical Enclosures: NEMA 12 Gas/Propane Eclipse 80% Eff: 400,000 BTU/hr Overload Protection: Std Wiring Conduit: Flex- Non-Metallic Equivalent Electric Heat: 105 kW Motor Type: Industrial Type of Conduit: Liquid tight NEMA12

Pump System & Performance:

Total System Flow: 374.00 gpm Flow per Nozzle: 18.70 gpm System Pressure: 212.00 psi Blast Velocity: 181.00 ft/sec Power Density: 1.19 hp/cuft

STANDARD:

70 hp

High Efficiency, Rated for continuous duty (20 Start/hour without overheating), vertical, centrifugal, seal-less, balanced, enclosed impeller.

STINGRAY 6036

SPECIFICATIONS

Note: All performance data taken at nozzle discharge.

AIRCRAFT WHEEL WASHER

Standard Features & General Construction:

STINGRAY MANUFACTURING

2450 Adie Road St. Louis, MO 63043 USA Phone: (314)447-9000 Fax: (314)447-0909 Email: sales@stingwash.com www.stingwash.com

File details come from the government source that posted it.