Exhibits A-F.pdf
PDF 1 MB Posted
- Attached to
- VARIOUS FASTENERS - DRAWING REQUIRED Federal contract opportunity
- Solicitation number
- SPMYM326Q6045
About this file
This document is a Contract Data Requirements List (CDRL) for federal fastener procurement covering multiple contract line items. The contract is administered by the Naval Supply Systems Command (CODE 245) with contractor SPMYM326Q6045.
The CDRL specifies data submission requirements for six fastener products across contract line items 0002, 0004, 0006, 0008, 0010, and 0012. Products include hex socket flat countersunk head screws, hex socket cylindrical head cap screws, hex head self-locking cap screws, and socket flat countersunk head cap screws. For each line item, two data items are required: (1) Certificate of Compliance (Data Item A001, B001, C001, D001, E001, F001) citing authority DI-MISC-81356A and (2) Certification Data/Report with Chemical & Mechanical Certification (Data Item A002, B002, C002, D002, E002, F002) citing authority DI-MISC-82386. Both data items must be submitted one time with material delivery under separate shipment numbers per FAR Clauses 252.232-7006, 252.232-7003, and 52.232-36. Test results must be quantitative and in specification-required units, with fastener certification demonstrating evidence of testing correct specimen quantities; new untested fasteners are required for wedge tensile and yield strength testing. Distribution is to addressee CODE 245 (133.2) with one final copy required and zero draft copies. The document was prepared by Conrad Gagne on 04/02/2026 and approved by Edward Walsh on 04/07/2026 and 04/13/2026.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 26Q6045 RFQ Required.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses.docx | DOCX document | |
| Security Agreement For NNPI_DD FORM 2345.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2C-0534-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. C. CATEGORY
TOP X TM OTHER
D. SYSTEM/ITEM F. CONTRACTOR
B. EXHIBIT
D
E. CONTRACT/PR NO.
60974011 - SPMYM326Q6045SOCKET HEAD CAP SCREW
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
D001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A NIA
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
D002 CERTIFICATION DATA / REPORT
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
NIA
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
4/13/2026
CONRAD GAGNE Ext: 6797 04/07/2026 X 4-13-26
245.2C
EDWARD WALSH
Sign ed by:W ALSH .EDW ARD .M .1411048035
(2 DATA ITEMS)
C. CATEGORY
TOP X TM OTHER
F. CONTRACTOR
B. EXHIBIT
E
E. CONTRACT/PR NO.
60974012 - SPMYM326Q6045
245.2C-0534-26
A. CONTRACT LINE ITEM NO.
D. SYSTEM/ITEM
SOCKET FLAT COUNTERSUNK
HEAD CAP SCREW
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
E001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A NIA
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
E002 CERTIFICATION DATA / REPORT
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
NIA
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
4/13/2026
CONRAD GAGNE Ext: 6797 04/07/2026 X 4-13-26
245.2C
EDWARD WALSH
(2 DATA ITEMS)
C. CATEGORY
TOP X TM OTHER
F. CONTRACTOR
B. EXHIBIT
F
E. CONTRACT/PR NO.
60974013 - SPMYM326Q6045
245.2C-0534-26
A. CONTRACT LINE ITEM NO.
D. SYSTEM/ITEM
HEX HEAD SLF LKG CAP
SCREW
1. DATA ITEM NO. 2. TITLE of DATA ITEM 3. SUBTITLE
F001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY(DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION C. 2 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD With Material DRAFT FINAL One Time
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT 133.2 0 1 0
N/A NIA
SUBMISSION
N/A
16 REMARKS 0 0 0
1. Technical content as described in the respective contract line item(s).
15. TOTAL 0 1 0
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
F002 CERTIFICATION DATA / REPORT
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-82386 SECTION C. 3 CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
DD
REQUIRED One Time
With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT
NIA
SUBMISSION
133.2 0 1 0 N/A
N/A
16 REMARKS
1. Paragraphs 6 AND 8 of DI-MISC-82386 do not apply. 0 0 0
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0 Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232- 7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-82386, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
4/13/2026
CONRAD GAGNE Ext: 6797 04/07/2026 X 4-13-26
245.2C
EDWARD WALSH
| Exhibit A |
| Exhibit B |
| Exhibit C |
| Exhibit D |
| Exhibit E |
| Exhibit F |
File details come from the government source that posted it. Updated .