Exhibit_-_Jobsite_Safety_Checklist.pdf

Jobsite Safety Inspection Jobsite Location: Date:

Inspected by: Others present:

1) Site Access

☐ Clean, level ground

☐ Adequate stairs, ramps, ladders

☐ Adequate Lighting

2) Postings & Signage

☐ Cal/OSHA Postings

☐ Warning Signs

☐ Emergency Procedures/Phone Numbers

3) Fire Protection

☐ Fire Extinguishers present at appropriate distances (General @75ft., Construction @100ft.)

☐ Fire Extinguishers fully charged

☐ Fire Extinguishers adequately identified

☐ Fire/Emergency Plan in place

4) Housekeeping

☐ Clear walkways

☐ Clean work area

☐ Clear access/exits

☐ Extension cords properly used, in good condition

☐ Adequate restrooms and hand washing facilities

☐ Adequate lighting

5) First Aid & Hygiene

☐ Adequate first aid supplies on site

☐ First aid kits adequately identified

☐ First aid kits easily accessed

☐ First aid kits inspected

6) Worker Education & Training

☐ Staff properly trained

☐ Company safety programs in place

☐ Workers observed following safety guidelines

☐ Injury/hazard reporting process in place

☐ Management/Supervision available on site

☐ Safety Manager/Representative on site

7) Material Handling & Storage

☐ Properly located

☐ Safely piled, stacked, bundled

☐ Properly moved and lifted

☐ Properly labeled

☐ Inventory available of Hazardous Chemicals

☐ Safety Data Sheets readily available for Hazardous chemicals

☐ Hazard Communication Program shared

8) Guardrails & Barricades

☐ Located where required (e.g. Skylights, Confined Spaces, Rooftop edges, etc.)

☐ Properly constructed

☐ Adequately secured

9) Personal Protective Equipment (PPE)

☐ PPE inspected before use

☐ Foot Protection worn

☐ Hand Protection worn

☐ Hard Hats worn

☐ Fall Protection worn

☐ Hearing Protection worn

☐ Respiratory Protection worn (e.g. Wildfire smoke, Welding fume, Silica exposure, etc.)

☐ Protective eyewear worn

10) Ladders

☐ Labels are legible

☐ Proper Angle

☐ Proper Size and Type

☐ Safe/Usable Condition

☐ Extend at least 3 feet above upper landing surface

☐ Properly used

11) Scaffolds

☐ Properly erected (planked and secured)

☐ Proper toe boards and guardrails

☐ Competent person on-site during erection and disassembling

12) Lifts (Forklift, Scissor Lift, Boom Lift)

☐ Lift operators properly trained

☐ Lifts inspected before use (every shift)

☐ Used in a safe manner

☐ Seatbelt worn

13) Cranes and Hoists

☐ Lift/Load plans available

☐ Inspected before use

☐ Maintenance log available

☐ Competent/Certified operator

☐ Tag Lines in place and used properly

☐ Signaler/Spotter in place

14) Fall Protection

☐ Fall Arrest Systems inspected

☐ Fall Arrest Systems properly worn

☐ Unprotected openings and ledges identified, marked, and protected

15) Power Tools and Equipment

☐ Good working condition

☐ Proper guards in place

☐ Powder-Actuated tools used by trained operators

16) Electrical Work

☐ Properly trained personnel

☐ Properly labeled breakers/circuits (including high voltage areas)

☐ Overhead lines flagged/identified with signage

☐ Surface cables properly guarded/secured

☐ Proper personal protective equipment used

☐ Hazardous energy control/Lock Out Tag Out procedures in place

☐ Hazardous Energy Control Plan and/or Lock out Tag out Program shared

17) Welding (Soldering and Brazing)

☐ Cylinders properly labeled

☐ Cylinders properly secured

☐ Cylinders properly stored (e.g. incompatible gases segregated, fire barriers maintained, etc.)

☐ Proper screens in place

☐ Proper ventilation/exhaust in place

☐ Fire extinguisher readily available

☐ Fire Watch in place

☐ Proper eye protection used

☐ Hot Work Permits in place

18) Compressed Gas Cylinders

☐ Properly secured

☐ Properly stored

☐ Proper signage and identification

☐ Valves, hoses, and attachments in good condition

19) Confined Spaces

☐ Proper signage for spaces

☐ Permits in place where required

☐ Air monitoring conducting before and during entries

☐ Rescue equipment readily available when required

☐ Trained emergency rescue staff on standby when required

☐ Confined Space Program shared

20) Trenches & Excavations

☐ Proper permit in place

☐ Competent Person present

☐ Properly sloped, where required

☐ Excavated soil properly placed

☐ Appropriate shoring used

☐ Proper access/exit to trench

☐ Proper storage of materials in and above trench

21) Traffic Control

☐ Trained traffic controllers

☐ Properly located

☐ Proper signage

☐ Properly dressed/equipped personnel (including vests)

22) Heat and Illness

☐ Sufficient Water

☐ Access to Shade

☐ High Heat Procedures

☐ Emergency Response Procedures