Exhibit E Errata to 2020 SS.pdf

20SS-001A-05

MICHIGAN

DEPARTMENT OF TRANSPORTATION

SUPPLEMENTAL SPECIFICATION

FOR

ERRATA TO THE 2020 STANDARD SPECIFICATIONS

1 of 4 12-01-21

Page Subsection Errata

1-83 108.05.A.2 In the first paragraph of this subsection change the language

“MDOT Form 1130” to read “MDOT Form 1130A”.

2-29 205.03.P.1 Delete the first sentence of this subsection and replace with the following:

“Do not dispose of material, temporarily or permanently, beyond the normal plan fill slope across wetlands or floodplains.”

2-30 205.03.P.2 Delete the first sentence of this subsection and replace with the following:

“Do not dispose of material, temporarily or permanently, in wetlands or floodplains.”

2-30 205.03.P.3 Delete the second paragraph of this subsection and replace with the following:

“Contact the appropriate regulatory agencies to determine whether an area is a regulated wetland or floodplain before disposing of surplus or unsuitable material in areas outside the right-of-way and not shown on the plans as disposal sites.”

2-30 205.03.P.3 Delete the first sentence of the third paragraph of this subsection and replace with the following:

“Immediately move to an upland site any surplus or unsuitable material that was disposed of in portions of wetlands or floodplains not shown on the plans as disposal sites, at no additional cost to the Department.”

2-30 205.03.P.4 Delete the first sentence of this subsection and replace with the following:

“The Department will notify the applicable regulatory agencies if the

Department becomes aware that the Contractor disposed of surplus or unsuitable material in portions of a wetland or floodplain not shown on the plans.”

3-31 308.04.D Change the subsection title from “D. General.” to read “A. General.”

4-11 401.04 Change the eighth pay item from the bottom of the list on this page to read as follows:

Culv End Sect __ inch, Grate .................................................. Each

2 of 4 12-01-21

4-12 401.04.C.4 Change this subsection to read:

“The Engineer will measure Culv End Sect __ inch, Grate by each as shown on the plans for the size of grate required.”

4-52 406.04.B In the second paragraph of this subsection delete the first sentence and replace with the following:

“The Department will pay separately for cast-in-place concrete, other than for culvert segments, headwalls, wingwalls, aprons, and curtain walls.”

6-23 602.04.F Add the following sentence to the end of the first paragraph of this subsection:

Temporary concrete pavement, pavement within 4 feet of an obstruction, pavement areas less than 300 square yards, or pavement less than 3 feet wide will not be cored.

6-23 602.04.F Delete the following language from this subsection on this page:

“The Engineer will not core the following:

1. Temporary concrete pavement;

2. Pavement within 4 feet of an obstruction;

3. Pavement areas less than 300 square yards; or

4. Pavement less than 3 feet wide.”

6-24 602.04 Rename the following subsections as follows:

“1. Initial Core.

6-24 602.04 2. Additional Cores.

6-24 602.04 3. Price Adjustment for Thickness.

6-25 602.04 4. Price Adjustments for Steel Locations within the Pavement.

6-26 602.04 5. Remove and Replace.”

7-107 709.04 Change the Pay Unit on the second pay item from the top of the list on this page to read as follows:

Thousand Board Foot

8-44 810.03.J.9 Add a period to the end of the third sentence in this subsection.

8-53 810.03.V Add a period to the end of the second sentence of the first paragraph of this subsection.

8-57 810.04.L Change this subsection to read:

“The unit price for Sign, Erect, Salv of the type required includes erecting the salvaged sign on a new sign support or existing sign support, as shown on the plans, and attaching devices, and hardware, including brackets.”

3 of 4 12-01-21

8-110 812.04 Change the fifth and sixth pay item from the top of the list on this page to read as follows:

Sign, Type B, Temp, Prismatic, Spec, Furn ................ Square Foot Sign, Type B, Temp, Prismatic, Spec, Oper ................ Square Foot

8-141 815.04.C.1.d Delete this subsection in its entirety.

8-142 815.04.C.2.d Change this subsection to read:

"During the first watering of the second growing season, remove and dispose of the guying material, identification tags, and inspection tags."

8-170 818.04.G Delete this subsection in its entirety.

8-170 818.04 Rename the following subsections as follows:

“G. Handholes (Hh).

8-171 818.04 H. Service Disconnect.

8-171 818.04 I. Metered Service.

8-171 818.04 J. Unmetered Service.

8-172 818.04 K. Wood Pole.

8-172 818.04 L. Concrete Pole, Fit Up.

8-172 818.04 M. Steel Pole, Fit Up.

8-172 818.04 N. Bracket Arm.”

8-185 820.01.B Add a period to the end of the first sentence of this subsection.

8-199 820.04 Add the pay item to the list on this page:

TS, (number) Way (type) Mtd (LED) Optic

8-200 820.04 Change the second pay item from the top of the list on this page to read as follows:

TS Head, Temp ...................................................................... Each

8-200 820.04 Change the eleventh pay item from the top of the list on this page to read as follows:

TS, Lens, Pedestrian Sym (LED) ........................................... Each

8-200 820.04 Delete the following pay items from the list:

Strain Pole, Steel, 6 bolt, __ foot ............................................. Each Mast Arm Pole, Cat__ ............................................................. Each Mast Arm, __Foot, Cat ............................................................ Each

8-200 820.04 Change the eleventh pay item from the bottom of the list on this page to read as follows:

Mast Arm, Rem ....................................................................... Each

8-204 820.04.C Delete the last paragraph of this subsection in its entirety.

8-204 820.04.D Delete the first paragraph of this subsection in its entirety.

9-119 913.06 Change this subsection to read:

4 of 4 12-01-21

Circular precast concrete units with circular reinforcement for adjusting rings, tops, risers, and sump bases for manholes, catch basins, and inlets must meet the requirements of AASHTO M199 and the following additions and exceptions:

9-133 917.03 Rename the four subsections following the first paragraph on this page as follows:

D. Deciduous Shade Trees.

E. Small Trees, Ornamentals, and Shrubs.

F. Evergreen Trees.

G. Vines, Ground Cover, and Herbaceous Ornamental Plants.

6A Pay Item Index Change the following pay item to read:

Culv End Sect __ inch, Grate 4-11 401

14A Pay Item Index Delete the following pay items reading:

Mast Arm Pole, Cat__ ..............................................8-200 820 Mast Arm, __Foot, Cat .............................................8-200 820 14A Pay Item Index Change the following pay item to read:

Mast Arm, Rem ........................................................8-200 820

22A Pay Item Index Change the following pay item to read:

Sign, Type B, Temp, Prismatic, Spec, Furn .............8-110 812 Sign, Type B, Temp, Prismatic, Spec, Oper .............8-110 812

23A Pay Item Index Delete the following pay item reading:

Strain Pole, Steel, 6 bolt, __ foot ..............................8-200 820

26A Pay Item Index Change the following pay item to read:

TS Head, Temp .......................................................8-200 820