Exhibit D - Inspection Report.pdf

PDF 81 KB Posted

Attached to
FY22 Area Wide Tree Release Federal contract opportunity
Solicitation number
12363N22Q4050
Issued by
Department of Agriculture Forest Service R9-Eastern Region

View the file

Other files for this federal contract opportunity

Other files attached to FY22 Area Wide Tree Release, newest first.
File Type Posted
Exhibit B - Maps.pdf PDF
Exhibit E - Tree Selection Criteria.pdf PDF
Exhibit A - Specs.pdf PDF
Exhibit C - Information Sheet.pdf PDF
Provided Evaluation Forms.docx DOCX document
12363N22Q4050 - FY22 Area Wide Tree Release - PA.docx DOCX document
Service Contract Act WD 2015-4249.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

FY22 Area Wide Tree Release

Allegheny NF

Exhibit D

TREE RELEASE INSPECTION REPORT

Contract #: ______________________ Inspected By: ________________________ (print)

Area Inspected: __________________ Date of Inspection: ____________________

Plot

#Desirables

Total #Desirables

Cut %Desirables

Cut #Undesirables

Total # Undesirables

Not Cut %Undesirables

Not Cut Notes

Unit Slash Work has been completed ________________ (date)

If corrections were needed indicate the date corrections were made: _________________ (date)

COMMENTS:

INSTRUCTIONS:

The radius of each plot is six (6) feet. There will be a minimum of one plot per 5 acres taken. Areas greater than 15 acres shall have a plot for every three acres. Plots will be systematically distributed over the area using a grid system.

When counting desirables and there are more than 25 on the plot you may estimate by counting a ¼ plot and multiply by four. All desirables cut shall be counted along with undesirables not cut. There should be no more than 10% of desirables cut and no more than 10% of undesirables not cut.

All starting points and plot lines will be designated with flagging (do not use orange flagging). All plots shall have a plot center marked and numbered. Flagging shall be used to delineate the plot so it can be relocated. An Area Map indicating plot layout, bearings and distance used between plots shall be completed for each Area.

File details come from the government source that posted it. Updated .