Exhibit C.pdf
PDF 110 KB Posted
- Attached to
- VARIOUS CAP SCREWS AND MACHINE SCREWS Federal contract opportunity
- Solicitation number
- SPMYM325Q6057
About this file
This document is a Contract Data Requirements List (CDRL) for a federal solicitation related to various cap screws and machine screws. The CDRL outlines two specific data items (C001 and C002) for the CAPS CREW contract, with solicitation number SPMYM325Q6057 issued by the Defense Logistics Agency Land and Maritime. The requirements specify the submission of a Certificate of Compliance (C001) and a Certification Data/Report (C002), both to be submitted one time with material delivery.
The solicitation is a 100% small business set-aside for commercial items using Lowest Price Technically Acceptable (LPTA) evaluation criteria, covering three types of screws: flat head machine screws (225 units), socket flat head cap screws (200 units), and socket head cap screws (600 units). The procurement includes specific data requirements for each item, with contractors required to provide detailed chemical and mechanical test certifications. The solicitation will close on 6/16/2025 at 3pm EST, with quotes to be submitted via email to jannell.moriarty@dla.mil, and vendors must be registered in the System for Award Management (SAM) to be considered.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Exhibit A.pdf | ||
| Attachment 0002.pdf | ||
| 25Q6057 RFQ Required.docx | DOCX document | |
| Attachment 0001.pdf | ||
| Exhibit B.pdf | ||
| Attachment 0003.pdf | ||
| Clauses - Full Text Provisions and Clauses 241128.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
C
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPS CREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
C001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
C002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
0008-0009
5142E034 - SPMYM325Q6057
| CONTRACT DATA REQUIREMENTS LIST 2 DATA ITEMS: | |
| TM: | |
| OTHER: | |
| D SYSTEMITEM CAPS CREW E CONTRACTPR NO F CONTRACTOR 5142E034 SPMYM325Q6057: | |
| a ADDRESSEE b COPIES: | |
| 8: | |
| APP CODE: | |
| 11 AS OF DATE: | |
| 13 DATE OF: | |
| DRAFT FINAL: | |
| 16 REMARKS 0 0 0Row1: | |
| a ADDRESSEE b COPIES_2: | |
| 8 APP CODE: | |
| DRAFT FINAL_2: | |
| 11 AS OF DATE_2: | |
| 13 DATE OF_2: | |
| 16 REMARKS: | |
| 0 0 0Row1: | |
| G PREPARED BY: | |
| H DATE: | |
| X: | |
| J DATE: | |
| 2025-06-03T14:30:16-0400 | |
| CRUVER.MICHAEL.L.1228518316 |
File details come from the government source that posted it. Updated .