Exhibit C.pdf
PDF 283 KB Posted
- Attached to
- Socket Head Cap Screws
- Solicitation number
- SPMYM326Q5018
About this file
This Contract Data Requirements List (CDRL) is for a capscrew contract (PR Number SPMYM326Q5018) with two primary data items to be submitted by the vendor. The first data item (C001) is a Certificate of Compliance for Quality Certification, and the second data item (C002) is a Certification Data/Report for Chemical & Mechanical Certification. Both data items are to be submitted one time, with material, under separate shipment numbers to Requiring Office Code 245. The vendor must provide technical content for the respective contract line items, with specific requirements including quantitative test results, evidence of testing the correct number of specimens, and compliance with marking and certification requirements for Controlled Industrial Material.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2.pdf | ||
| Exhibit A.pdf | ||
| Attachment 1.pdf | ||
| Attachment 4.pdf | ||
| Clauses - Full Text Provisions and Clauses.docx | DOCX document | |
| Exhibit D.pdf | ||
| RFQ 26Q5018.pdf | ||
| Attachment 3.pdf | ||
| Exhibit B.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
C
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
C001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
C002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
SPMYM326Q5018
| CONTRACT DATA REQUIREMENTS LIST 2 DATA ITEMS: |
| A CONTRACT LINE ITEM NO: |
| B EXHIBIT A: |
| undefined: |
| undefined_2: |
| C CATEGORY TDP TM OTHER: |
| D SYSTEMITEM CAPSCREW: |
| E CONTRACTPR NO: |
| F CONTRACTOR: |
| 6 REQUIRING OFFICE CODE 245: |
| 7 DD 250 REQ DD: |
| 8 APP CODE NA: |
| REPRO: |
| 9 DIST STATEMENT REQUIRED A: |
| 14 DISTRIBUTION: |
| 10 FREQUENCY One Time: |
| 12 DATE OF 1st SUBMISSION With Material: |
| a ADDRESSEE: |
| b COPIES: |
| DRAFT: |
| FINAL: |
| 0: |
| 1: |
| 0_2: |
| 133216 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number: |
| 133216 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_2: |
| 016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number: |
| 016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_2: |
| 016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_3: |
| 15 TOTAL: |
| 0_3: |
| 1_2: |
| 0_4: |
| 1DATA ITEM NO A002: |
| 3 SUBTITLE CHEMICAL MECHANICAL CERTIFICATION: |
| 4 AUTHORITY DIMISC80678: |
| 6 REQUIRING OFFICE CODE 245_2: |
| 7 DD 250 REQ DD_2: |
| 8 APP CODE NA_2: |
| 9 DIST STATEMENT REQUIRED A_2: |
| 10 FREQUENCY One Time_2: |
| 14 DISTRIBUTION_2: |
| a ADDRESSEE_2: |
| b COPIES_2: |
| FINAL_2: |
| DRAFT_2: |
| REPRO_2: |
| 0_5: |
| 1_3: |
| 0_6: |
| 133216 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply: |
| 133216 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_2: |
| 016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply: |
| 016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_2: |
| 016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_3: |
| 15 TOTAL_2: |
| 0_7: |
| 1_4: |
| 0_8: |
| G PREPARED BY RQUDGDJQH: |
| H DATE: |
| J DATE: |
File details come from the government source that posted it. Updated .