Exhibit_B-1_Rate_Sheet__All_Groups_1_Thru_4.xlsx

40 KB Posted

Attached to
IFB C5612005-D BLADE SHARPENING SERVICES
Solicitation number
0000030886
Issued by
California

About this file

Written by GovTribe AI ·

This document is an Exhibit B-1 Rate Sheet related to an Invitation for Bid (IFB) from the California Department of Corrections and Rehabilitation (CDCR) Inmate/Ward Labor (IWL) Program for Blade Sharpening Services. The IFB includes four groups of participating institutions, where the contractor must be located within a specified radius of each group. The services requested include sharpening of various types of blades and cutters such as carbide tipped saw blades, dado set chippers, sharper cutters, high-speed steel knives, router bits, and drill bits. The State's estimated spend for the four groups ranges from $15,000 to $50,000. Bidders must bid on all items and provide unit pricing, with the lowest responsive bidder determined based on the total bid amount for each group. Contractors may offer a discount of at least 1% of the invoice amount, with a minimum of $50, for invoices paid within 30 days.

The pricing must include all labor, equipment, delivery, materials, supplies, permits, licenses, insurance, transportation, travel, and other expenses necessary to perform the services. The State reserves the right to increase or omit portions of the work as deemed necessary. Bidders are required to download an Excel version of the rate sheet in addition to the PDF file to assist in accurate bid calculations.

View the file

Other files

File Type Posted
IFB_C5612005-D_Blade_Sharpening_Services.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Group 1.

BLADE SHARPENING SERVICES
CALIFORNIA REHABILITATION CENTER (CRC)
CALIFORNIA INSTITUTION FOR MEN (CIM)
CALIFORNIA INSTITUTION FOR WOMEN (CIW)
INMATE/WARD LABOR PROGRAM
Note: Bidder is required to bid each item. Rates must include all fees and taxes. Failure to indicate a dollar amount in any item will be grounds to reject the entire bid. Bidder will enter a zero dollar amount ($0.00) for items that they deem to be non-billable items. A zero dollar ($0.00) amount listed for any and all items will be interpreted and understood by the State to mean that the bidder indicating a zero dollar amount shall perform any such services at no cost to the State.
Electronic bid packages include an Excel version of this Rate Sheet (Exhibit B-1) in addition to the PDF file in order to assist bidders in computing accurate totals. Bidders are encouraged to download the Excel version and complete all highlighted cells.
All prices and notations must be printed in ink or typewritten and shall encompass every item of expense necessary to perform the services.
Quantities listed on Exhibit B-1 Rate Sheet are the State's estimates only and are offered as a basis for comparison of bids. The State does not expressly or by implication agree that the actual amount of work will correspond therewith and reserves the right to increase/omit portions of the work as may be deemed necessary or advisable by the State.
Group 1.
ITEMSSERVICESTYPEDESCRIPTIONUNIT PRICE
CARBIDE TIPPED SAW BLADESSharpenATB/TCG/COMBOup to 40 Teeth$
SharpenATB/TCG/COMBOfrom 41 to 80 Teeth$
SharpenATB/TCG/COMBOmore than 80 Teeth$
DADO SETS CHIPPERSSharpenN/A2 wing chippers (outside blades)$
Sharpen2 wing chippers (inside blades)$
SHARPER CUTTERS STRAIGHT EDGE PROFILES ALL DIAMETERSSharpen Only3 WingStraight$
Sharpen Only4 WingStraight$
Sharpen Only6 WingStraight$
SHARPER CUTTERS STRAIGHT EDGE PROFILES ALL DIAMETERSSharpen Only3 WingDetailed$
Sharpen Only4 WingDetailed$
Sharpen Only6 WingDetailed$
HIGH SPEED STEEL KNIVESSharpen OnlyPer KnifeStraight$
Sharpen OnlyPer KnifeDetailed$
CARBIDE TIPPED AND SOLID CARBIDE ROUTER BITSSharpen OnlyAll DiametersStraight$
Sharpen OnlyAll DiametersDetailed$
SOLID CARBIDE SPIRALS SOLID CARBIDE COMPRESSIONSharpen Only1/4 in Diam to 1/2 in DiamN/A$
Sharpen Only1/4 in Diam to 1/2 in Diam$
DRILL BITSSharpen OnlyJobber DrilsN/A$
Sharpen OnlyBrad points$
Sharpen OnlyForstner$
Sharpen OnlyCountersink$
Total Bid Amount$ - 0
BASIS FOR AWARD
Contractor must be within a 95-mile radius of the lnstitutions
The "Basis for Award" is strictly used for bidding purposes only and used to determine the lowest responsive bidder. *The Agreement for this group shall be witten for the State's estimate of $25,000.00
Contractor may offer a discount to the amount paid on invoices received and accepted by the CDCR in order for the invoices to be paid within thirty (30) days of receipt. Discount offered on invoices must be at least one percent of the invoice amount and a minimum of $50.00.

Discount offered on invoices to be paid within 30 days of receipt = _____% *

* The percent of discount (highest discount prevails) may be used in the event of tie bids. Refer to the Notice to Prospective Bidders, Bid Submission Requirements.

California Department of Corrections and Rehabilitation (CDCR) Rate Sheet Bid Number C5612005-D Exhibit B-1

Group 2.

BLADE SHARPENING SERVICES
CALIPATRIA STATE PRISON (CAL)
CENTINELA STATE PRISON (CEN)
INMATE/WARD LABOR PROGRAM
Note: Bidder is required to bid each item. Rates must include all fees and taxes. Failure to indicate a dollar amount in any item will be grounds to reject the entire bid. Bidder will enter a zero dollar amount ($0.00) for items that they deem to be non-billable items. A zero dollar ($0.00) amount listed for any and all items will be interpreted and understood by the State to mean that the bidder indicating a zero dollar amount shall perform any such services at no cost to the State.
Electronic bid packages include an Excel version of this Rate Sheet (Exhibit B-1) in addition to the PDF file in order to assist bidders in computing accurate totals. Bidders are encouraged to download the Excel version and complete all highlighted cells.
All prices and notations must be printed in ink or typewritten and shall encompass every item of expense necessary to perform the services.
Quantities listed on Exhibit B-1 Rate Sheet are the State's estimates only and are offered as a basis for comparison of bids. The State does not expressly or by implication agree that the actual amount of work will correspond therewith and reserves the right to increase/omit portions of the work as may be deemed necessary or advisable by the State.
Group 2.
ITEMSSERVICESTYPEDESCRIPTIONUNIT PRICE
CARBIDE TIPPED SAW BLADESSharpenATB/TCG/COMBOup to 40 Teeth$
SharpenATB/TCG/COMBOfrom 41 to 80 Teeth$
SharpenATB/TCG/COMBOmore than 80 Teeth$
DADO SETS CHIPPERSSharpenN/A2 wing chippers (outside blades)$
Sharpen2 wing chippers (inside blades)$
SHARPER CUTTERS STRAIGHT EDGE PROFILES ALL DIAMETERSSharpen Only3 WingStraight$
Sharpen Only4 WingStraight$
Sharpen Only6 WingStraight$
SHARPER CUTTERS STRAIGHT EDGE PROFILES ALL DIAMETERSSharpen Only3 WingDetailed$
Sharpen Only4 WingDetailed$
Sharpen Only6 WingDetailed$
HIGH SPEED STEEL KNIVESSharpen OnlyPer KnifeStraight$
Sharpen OnlyPer KnifeDetailed$
CARBIDE TIPPED AND SOLID CARBIDE ROUTER BITSSharpen OnlyAll DiametersStraight$
Sharpen OnlyAll DiametersDetailed$
SOLID CARBIDE SPIRALS SOLID CARBIDE COMPRESSIONSharpen Only1/4 in Diam to 1/2 in DiamN/A$
Sharpen Only1/4 in Diam to 1/2 in Diam$
DRILL BITSSharpen OnlyJobber DrilsN/A$
Sharpen OnlyBrad points$
Sharpen OnlyForstner$
Sharpen OnlyCountersink$
Total Bid Amount$ - 0
BASIS FOR AWARD
Contractor must be within a 75-mile radius of the lnstitutions
The "Basis for Award" is strictly used for bidding purposes only and used to determine the lowest responsive bidder.*This Agreement for this group shall be witten for the State's estimate of $50,000.00
Contractor may offer a discount to the amount paid on invoices received and accepted by the CDCR in order for the invoices to be paid within thirty (30) days of receipt. Discount offered on invoices must be at least one percent of the invoice amount and a minimum of $50.00.

* The percent of discount (highest discount prevails) may be used in the event of tie bids. Refer to the Notice to Prospective Bidders, Bid Submission Requirements.

Rate Sheet Bid Number C5612005-D

Group 3.

BLADE SHARPENING SERVICES
RICHARD J. DONOVAN CORRECTIONAL FACILITY (RJD)
INMATE/WARD LABOR PROGRAM
Note: Bidder is required to bid each item. Rates must include all fees and taxes. Failure to indicate a dollar amount in any item will be grounds to reject the entire bid. Bidder will enter a zero dollar amount ($0.00) for items that they deem to be non-billable items. A zero dollar ($0.00) amount listed for any and all items will be interpreted and understood by the State to mean that the bidder indicating a zero dollar amount shall perform any such services at no cost to the State.
Electronic bid packages include an Excel version of this Rate Sheet (Exhibit B-1) in addition to the PDF file in order to assist bidders in computing accurate totals. Bidders are encouraged to download the Excel version and complete all highlighted cells.
All prices and notations must be printed in ink or typewritten and shall encompass every item of expense necessary to perform the services.
Quantities listed on Exhibit B-1 Rate Sheet are the State's estimates only and are offered as a basis for comparison of bids. The State does not expressly or by implication agree that the actual amount of work will correspond therewith and reserves the right to increase/omit portions of the work as may be deemed necessary or advisable by the State.
Group 3.
ITEMSSERVICESTYPEDESCRIPTIONUNIT PRICE
CARBIDE TIPPED SAW BLADESSharpenATB/TCG/COMBOup to 40 Teeth$
SharpenATB/TCG/COMBOfrom 41 to 80 Teeth$
SharpenATB/TCG/COMBOmore than 80 Teeth$
DADO SETS CHIPPERSSharpenN/A2 wing chippers (outside blades)$
Sharpen2 wing chippers (inside blades)$
SHARPER CUTTERS STRAIGHT EDGE PROFILES ALL DIAMETERSSharpen Only3 WingStraight$
Sharpen Only4 WingStraight$
Sharpen Only6 WingStraight$
SHARPER CUTTERS STRAIGHT EDGE PROFILES ALL DIAMETERSSharpen Only3 WingDetailed$
Sharpen Only4 WingDetailed$
Sharpen Only6 WingDetailed$
HIGH SPEED STEEL KNIVESSharpen OnlyPer KnifeStraight$
Sharpen OnlyPer KnifeDetailed$
CARBIDE TIPPED AND SOLID CARBIDE ROUTER BITSSharpen OnlyAll DiametersStraight$
Sharpen OnlyAll DiametersDetailed$
SOLID CARBIDE SPIRALS SOLID CARBIDE COMPRESSIONSharpen Only1/4 in Diam to 1/2 in DiamN/A$
Sharpen Only1/4 in Diam to 1/2 in Diam$
DRILL BITSSharpen OnlyJobber DrilsN/A$
Sharpen OnlyBrad points$
Sharpen OnlyForstner$
Sharpen OnlyCountersink$
Total Bid Amount$ - 0
BASIS FOR AWARD
Contractor must be within a 75-mile radius of the lnstitution
The "Basis for Award" is strictly used for bidding purposes only and used to determine the lowest responsive bidder.*This Agreement for this group shall be witten for the State's estimate of $50,000.00
Contractor may offer a discount to the amount paid on invoices received and accepted by the CDCR in order for the invoices to be paid within thirty (30) days of receipt. Discount offered on invoices must be at least one percent of the invoice amount and a minimum of $50.00.

* The percent of discount (highest discount prevails) may be used in the event of tie bids. Refer to the Notice to Prospective Bidders, Bid Submission Requirements.

Rate Sheet Bid Number C5612005-D

Group 4.

BLADE SHARPENING SERVICES
IRONWOOD STATE PRISON (ISP)
INMATE/WARD LABOR PROGRAM
Note: Bidder is required to bid each item. Rates must include all fees and taxes. Failure to indicate a dollar amount in any item will be grounds to reject the entire bid. Bidder will enter a zero dollar amount ($0.00) for items that they deem to be non-billable items. A zero dollar ($0.00) amount listed for any and all items will be interpreted and understood by the State to mean that the bidder indicating a zero dollar amount shall perform any such services at no cost to the State.
Electronic bid packages include an Excel version of this Rate Sheet (Exhibit B-1) in addition to the PDF file in order to assist bidders in computing accurate totals. Bidders are encouraged to download the Excel version and complete all highlighted cells.
All prices and notations must be printed in ink or typewritten and shall encompass every item of expense necessary to perform the services.
Quantities listed on Exhibit B-1 Rate Sheet are the State's estimates only and are offered as a basis for comparison of bids. The State does not expressly or by implication agree that the actual amount of work will correspond therewith and reserves the right to increase/omit portions of the work as may be deemed necessary or advisable by the State.
Group 4.
ITEMSSERVICESTYPEDESCRIPTIONUNIT PRICE
CARBIDE TIPPED SAW BLADESSharpenATB/TCG/COMBOup to 40 Teeth$
SharpenATB/TCG/COMBOfrom 41 to 80 Teeth$
SharpenATB/TCG/COMBOmore than 80 Teeth$
DADO SETS CHIPPERSSharpenN/A2 wing chippers (outside blades)$
Sharpen2 wing chippers (inside blades)$
SHARPER CUTTERS STRAIGHT EDGE PROFILES ALL DIAMETERSSharpen Only3 WingStraight$
Sharpen Only4 WingStraight$
Sharpen Only6 WingStraight$
SHARPER CUTTERS STRAIGHT EDGE PROFILES ALL DIAMETERSSharpen Only3 WingDetailed$
Sharpen Only4 WingDetailed$
Sharpen Only6 WingDetailed$
HIGH SPEED STEEL KNIVESSharpen OnlyPer KnifeStraight$
Sharpen OnlyPer KnifeDetailed$
CARBIDE TIPPED AND SOLID CARBIDE ROUTER BITSSharpen OnlyAll DiametersStraight$
Sharpen OnlyAll DiametersDetailed$
SOLID CARBIDE SPIRALS SOLID CARBIDE COMPRESSIONSharpen Only1/4 in Diam to 1/2 in DiamN/A$
Sharpen Only1/4 in Diam to 1/2 in Diam$
DRILL BITSSharpen OnlyJobber DrilsN/A$
Sharpen OnlyBrad points$
Sharpen OnlyForstner$
Sharpen OnlyCountersink$
Total Bid Amount$ - 0
BASIS FOR AWARD
Contractor must be within a 75-mile radius of the lnstitution
The "Basis for Award" is strictly used for bidding purposes only and used to determine the lowest responsive bidder.*This Agreement for this group shall be witten for the State's estimate of $15,000.00
Contractor may offer a discount to the amount paid on invoices received and accepted by the CDCR in order for the invoices to be paid within thirty (30) days of receipt. Discount offered on invoices must be at least one percent of the invoice amount and a minimum of $50.00.

* The percent of discount (highest discount prevails) may be used in the event of tie bids. Refer to the Notice to Prospective Bidders, Bid Submission Requirements.

Rate Sheet Bid Number C5612005-D

File details come from the government source that posted it. Updated .