EXHIBIT A SPMYM326Q7020.pdf
PDF 281 KB Posted
- Attached to
- SELF-LOCKING HEX NUTS
- Solicitation number
- SPMYM326Q7020
About this file
This is a Contract Data Requirements List (CDRL) for self-locking hex nuts under contract number 60164003/SPMYM326Q7020, containing two required data items to be submitted by the contractor.
The first data item (A001) is a Certificate of Compliance certifying quality compliance, with authority under DI-MISC-81356A. This certificate must be submitted one time with material delivery to requiring office CODE 245, with final distribution to CODE 133.2. One copy each of draft and final versions is required. The second data item (A002) is a Certification/Data Report for chemical and mechanical certification, with authority under DI-MISC-80678, also due one time with material submission to CODE 245 with the same distribution requirements. This certification must contain actual test results of all chemical and mechanical tests required by the specification in quantitative units as specified. Key requirements include that paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply; fastener certification must show evidence of testing with the correct number of specimens using new untested fasteners for wedge tensile and yield strength testing; and compliance with contract section requirements for marking and certification of controlled industrial materials. Both data items are submitted under separate shipment numbers with payment and submission governed by clauses 252.232-7006, 252.232-7003, or 52.232-36. The CDRL was prepared by Christopher Breton on 1/16/2026 and approved by Edward Walsh on 05/05/2026.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ SPMYM326Q7020 Amend 1 Required.pdf | ||
| Clauses - Full Text Provisions and Clauses.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2P-0079-26 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO.
B. EXHIBIT
A
C. CATEGORY
TDP ____X___ TM ______ OTHER______
D. SYSTEM/ITEM
SELF-LOCKING HEX
NUTS
E. CONTRACT/PR NO.
60164003/
SPMYM326Q7020
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF
QUALITY COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACTREFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12.DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENCE
SUBMISSION
N/A
REG REP
RO
CODE 133.2 0 1 0
16. REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number."
15. TOTAL 0 1 0
1. DATA ITEM NO.
A002
2. TITLE of DATA ITEM
CERTIFICATION / DATA REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION: C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10 FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
WITH MATERIAL
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENCE
SUBMISSION
N/A
REG REP
RO
CODE 133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
15. TOTAL 0 1 0
G. PREPARED BY
CHRISTOPHER BRETON
245.2P
H. DATE
1/16/2026
I. APPROVED BY 245.2
5 / 5 / 2 0 2 6
X E D W A R D W A L S H
S i g n e d b y : W A L S H . E D W A R D . M . 1 4 1 1 0 4 8 0 3 5
J. DATE
05/05/2026
DD FORM 1423-1 (FACSIMILE) PAGE 1 OF 1
File details come from the government source that posted it. Updated .