Exhibit A - Spec ATTACH0001 - Mech Tool Set.doc

W56HZV-

Specification (Attachment 0001) March 2021

METRIC/STANDARD TOOL SET, GENERAL MECHANIC

THE TOOL SET SHALL BE PROVIDED WITH ALL NEW COMPONENTS AND HAVE THE FOLLOWING MINIMUM FEATURES AND CAPABILITIES:

1. CONFIGURATION

1.1. The items in the tool set shall be the latest model available.

1.2. The tool set shall contain:

1.2.1. 97-piece chrome-plated, 3/8” and 1/2” drive socket and ratchet handle set including but not limited to:

1.2.1.1. An assortment of 3/8” drive standard sockets

1.2.1.2. An assortment of 1/2” drive standard sockets

1.2.1.3. Two 3/8” drive spark plug sockets

1.2.1.4. At least two 3/8” and one 1/2” drive extensions

1.2.1.5. One 3/8” and one 1/2” drive ratchet handles

1.2.1.6. One 3/8” drive universal joint

1.2.1.7. One 3/8” drive to 1/4” drive socket adapter

1.2.2. 9-piece 3/8” drive metric socket set, standard, 6-point (6mm to 19mm), chrome- plated, heat-treated steel, with holder

1.2.3. 9-piece 3/8” drive metric socket set, deep-well, 6-point (8mm to 16mm), chrome-plated, heat-treated steel, with holder

1.2.4. 9-piece 3/8” drive metric standard socket set, 12-point (8mm to 16mm), heat-treated, chrome-plated steel, with holder

1.2.5. 11-piece metric combination wrench set (7mm to 19mm), drop-forged, mirror-polished alloy steel, with carry/storage case

1.2.6. 8-piece automotive pliers set, drop-forged, heat-treated carbon steel, chrome-plated including but not limited to:

1.2.6.1. Adjustable, multiple position pliers

1.2.6.2. Diagonal cutter pliers

1.2.6.3. Electrical wire stripping pliers

1.2.6.4. Needle nose cutter pliers

1.2.6.5. Slip joint pliers

1.2.6.6. 10 in (25.4 cm) vise-grip pliers, with locking curved jaw

1.2.6.7. Brake spring pliers, with slotted arm and anchor hole

1.2.7. 63-piece screwdriver set, with magnetic tips where appropriate, chrome-plated steel shafts including but not limited to:

1.2.7.1. Slotted, Phillips, square, and star drivers

1.2.7.2. Precision picks, tack, puller

1.2.7.3. 9-piece SAE 1/4” drive sockets

1.2.7.4. 9-piece metric 1/4” drive sockets

1.2.7.5. Mini magnet parts tray

1.2.8. 28-piece heavy-duty punch and chisel set including but not limited to:

1.2.8.1. 5-piece taper punches

1.2.8.2. 5-piece pin punches

1.2.8.3. 2-piece center punches

1.2.8.4. 3-piece cold chisels

1.2.8.5. One chisel gauge

1.2.9. One metric hex key set with ball-ends, black finish heat-treated steel, including holder

1.2.10. One 24 oz (680 g) ball-peen hammer, high-carbon, steel forged head, hardened and tempered, rim-tempered face, polished face, hickory handle, length 15.25 in. (39 cm)

1.2.11. One 2 lb (907 g) dead blow hammer, one piece composite construction, sand filled head

1.2.12. One professional circuit tester light with heavy duty clip and 12 ft (3.66 m) retractable lead

1.2.13. One 25-blade metric feeler gauge, S-2 chrome vanadium steel

1.2.14. One pair ventilated safety glasses, with anti-fog, scratch/impact resistant, polycarbonate lenses with UV protection, which meets ANSI Z87.1-2010 standard

1.2.15. One ramp style spark plug gauge, chrome/vanadium high carbon steel

1.2.16. One 8 meter metric tape measure, steel and flexible, graduated in mm

1.2.17. One magnetic pick-up tool with LED light and flexible shaft, 5 lb (2.3 kg) magnetic power

1.2.18. One (10-150 psi) heavy-duty, dual head air chuck, SUV and truck tire pressure gauge, extended barrel, silver finish

1.2.19. One plastic, 20 in (500 mm) in length, lockable tool box, with built-in organization compartments and lift-out carry tray(s)

2. FEATURES

2.1. Language requirements:

2.1.1. Manual(s) (where appropriate) shall be provided, written in English

2.1.2. Any applicable warning/instruction labels provided shall be written in English or in universal symbols where appropriate.

3. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS:

3.1. Each Tool Set shall be tagged with a removable active RFID data rich tracking tag, specifically designated as Savi ST-654-041.

3.2. The active RFID tag shall have at least 128 Kbytes of memory.

3.3. The active RFID tag shall be compliant with ISO 18000/7 standards.

3.4. The tag shall be securely affixed to the set with two or more plastic cable ties.

3.5. The tag data and electronic data field format shall be in accordance with specifications established by Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 "Commodity Item Database Format" with the following clarifications:

3.5.1. The "document field" titled "DOCUMENT" shall be the document number (e.g. "milstrip") as specified by the Government procuring agency.

3.5.2. The "MISC1" field shall be the item serial number, if available.

3.5.3. The "MISC2" field shall be used for user comments (e.g. contract number).