Exhibit A.pdf
PDF 550 KB Posted
- Attached to
- Beryllium Plate
- Solicitation number
- SPMYM326Q5070
About this file
This is a Contract Data Requirements List (DD Form 1423-1) for contract number 5274440, establishing data submission requirements for a Plate item under contract line item 0002. The document specifies five data items that the contractor must submit as follows:
Data Item A001 (Certificate of Compliance): A one-time submission with material required to certify quality compliance per DI-MISC-81356A, referenced in contract Section C.2. The contractor must submit one final copy to Code 133.2 under a separate shipment number. Payment and submission procedures are governed by clauses 252.232-7006, 252.232-7003, or 52.232-36. Data Item A002 (Certification Data/Report): A one-time submission with material documenting chemical and mechanical certification per DI-MISC-80678, referenced in Section C.3. Test results must be quantitative and in specification-required units. Paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply. One final copy required. Additionally, requirements for marking and certification of controlled industrial material apply. Data Item A003 (Test/Inspection Report – Heat Treatment Results): A one-time submission with material per DI-MISC-80678, Section C.4. Vendor must submit heat treatment results per Note 7005 of drawing 7106787 REV-XC and Note 7014 of drawing 7066792/XD. Paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply. Data Item A004 (NDT (UT) Procedure Approval): A one-time submission prior to any ultrasonic testing per UDI-T-23732-B, Section C.5. Vendor procedures must comply with NAVSEA T9074-AS-GIB-010/271-REV-1 and Notes 7006 and 7033 of referenced drawings. Procedures require review and approval by PNSY Code 135T prior to performing UT. Paragraph 10.1 of UDI-T-23732-B does not apply. Data Item A005 (Test/Inspection Report – UT Results/Report): A one-time submission with material per DI-NDTI-80809B, Section C.6. UT test results must comply with NAVSEA Technical Publications T9074-AS-GIB-010/271 REV-1 and applicable drawing notes. Multiple paragraphs of DI-NDTI-80809B do not apply. All submissions require DD 250 documentation, distribution statement A marking, and submission under separate shipment numbers. The document was prepared by Jason LaFlamme (Ext-3032) on 09/13/25 and approved by Edward Walsh on 09/22/2025.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ 26Q5070.pdf | ||
| Exhibit C.pdf | ||
| Combined Synopsis Solicitation 26Q5070.pdf | ||
| Exhibit B.pdf | ||
| Security Agreement For NNPI.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 1423-1 (FACSIMILE) PAGE 1 of 3
CONTRACT DATA REQUIREMENTS LIST
245.2X-1766-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM E. CONTRACT/PR NO.
5274440
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY (DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C.2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
CODE 133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C.3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
CODE 133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual test results of all chemical & mechanical test(s) required by the specification
4. The test result(s) shall be quantitative & in the units required by the specification.
5. For payment & submission of data refer to clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
6. In addition to the certification data requirements specified in DI-MISC-80678, the requirements of the contract section titled, “Marking and Certification requirements for Controlled Industrial Material” apply.
15. TOTAL 0 1 0
SPMYM326Q5070
Plate
245.2X-1766-25 (1 DATA ITEM)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
Plate
E. CONTRACT/PR NO.
5274440
F. CONTRACTOR
1 DATA ITEM NO.
A003
2 TITLE of DATA ITEM
TEST/ INSPECTION REPORT
3 SUBTITLE
(HEAT TREATMENT RESULTS)
4 AUTHORITY (DATA Item Description Number)
DI-MISC-80678
5 CONTRACT REFERENCE
SECTION C. 4
6 REQUIRING OFFICE
PURCHASING ACTIVITY
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
WITH MATERIAL
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8 APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
CODE-133.2 0 1 0
16 EMARKS
- 1.Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
- VENDOR SHALL SUBMIT THEIR RESULTS OF THE HEAT-TREATMENT PER NOTE
7005 OF DWG 7106787 REV-XC & NOTE 7014 OF DWG 7066792/XD.
0 0 0
15. TOTAL 0 1 0
1. DATA ITEM NO.
A004
2 TITLE of DATA ITEM
NDT (UT) PROCEDURE APPROVAL
3 SUBTITLE
(UT) PROCEDURE
4 AUTHORITY (DATA Item Description Number)
UDI-T-23732-B
5 CONTRACT REFERENCE
SECTION C. 5
6 REQUIRING OFFICE
PURCHASING ACTIVITY
7. DD 250 REQ
LT
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
PRIOR TO ANY UT
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
CODE-135T 0 1 0
16 EMARKS
- PARA # 10.1 OF UDI-T-23732-B DO NOT APPLY.
- VENDOR’S UT PROCEDURE. TO BE VENDOR’S UT PROCEDURE IAW NAVSEA
T9074-AS-GIB-010/271-REV-1 AND NOTE 7006 OF DWG-7106787 REV-XC & NOTE 7033
OF DWG 7066792/XD. ACCEPTANCE CRITERIA TO BE PER NOTE 7006 OF DWG
7106787 REV-XC & NOTE 7033 OF DWG 7066792/XD. SUBMIT PROCEDURES TO
PNSY CODE 135T FOR REVIEW AND APPROVAL PRIOR TO PERFORMING ANY UT.
0 0 0
15. TOTAL 0 1 0
DD FORM 1423-1 (FACSIMILE) PAGE 2 of 3
245.2X-1766-25 (1 DATA ITEM)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP X TM ______ OTHER______
D. SYSTEM/ITEM
Plate
E. CONTRACT/PR NO.
5274440
F. CONTRACTOR
1 DATA ITEM NO.
A005
2 TITLE of DATA ITEM
TEST/ INSPECTION REPORT
3 SUBTITLE
(UT) RESULTS / REPORT
4 AUTHORITY (DATA Item Description Number)
DI-NDTI-80809B
5 CONTRACT REFERENCE
SECTION C. 6
6 REQUIRING OFFICE
PURCHASING ACTIVITY
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
CODE-133.2 0 1 0
16 REMARKS
- PARA #’S 10.2.2, 10.2.3.1, 10.2.4, 10.2.5, 10.2.6.2, 10.2.6.3, 10.2.6.4.2, 10.2.6.5 AND
10.2.6.6 OF DI-NDTI-80809B DO NOT APPLY.
- VENDOR SHALL SUBMIT THEIR UT TEST RESULTS IAW NAVSEA TECH PUB’S
T9074-AS-GIB-010/271 REV-1 & NOTE 7006 OF DWG 7106787 REV-XC & NOTE 7033 OF
DWG 7066792/XD.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY
JASON LAFLAMME EXT-3032
245.2X
H. DATE
09/13/25
I. APPROVED BY 245.2
9 / 2 2 / 2 0 2 5
X E D W A R D W A L S H
S i g n e d b y : W A L S H . E D W A R D . M . 1 4 1 1 0 4 8 0 3 5
J. DATE
09/22/2025
DD FORM 1423-1 (FACSIMILE) PAGE 3 of 3
File details come from the government source that posted it. Updated .