Exhibit A.pdf
PDF 120 KB Posted
- Attached to
- SOCKET FLAT HEAD CAP SCREWS
- Solicitation number
- SPMYM326Q6026
About this file
This is a Contract Data Requirements List specifying two data items required for cap screw deliverables under Contract/PR No. 6014E015 - SPMYM326Q6026, with the requiring office identified as CODE 245.
Data Item A001 requires submission of a Certificate of Compliance certifying quality compliance, based on Data Item Description DI-MISC-81356A. This certification must be submitted one time with material delivery as a separate shipment, with one final copy distributed to the requiring office. Data Item A002 requires Certification Data/Report documenting chemical and mechanical certification per DI-MISC-80678, also submitted one time with material as a separate shipment. The certification must include actual test results for all chemical and mechanical tests specified, with quantitative results expressed in units required by specification. For A002, paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply. Fastener certification must demonstrate testing of the correct number of specimens with new untested fasteners required for wedge tensile and yield strength testing. Both data items require compliance with contract marking and certification requirements for controlled industrial material. Payment and submission of data shall reference FAR Clauses 252.232-7006, 252.232-7003, or 52.232-36, with each data item submitted under a separate shipment number. The document was prepared by Stephen Young and approved by 245.2.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 26Q6026 RFQ Required.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses 260210.docx | DOCX document | |
| 26Q6026 RFQ Required.docx | DOCX document | |
| Clauses - Full Text Provisions and Clauses.docx | DOCX document | |
| Attachment 1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAP SCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
6014E015 - SPMYM326Q6026
File details come from the government source that posted it. Updated .