Exhibit A.pdf
PDF 177 KB Posted
- Attached to
- FLANGE
- Solicitation number
- SPSMYM326Q7008
About this file
This document is a Contract Data Requirements List (CDRL) for a federal contract with the number 5274E254 SPMYM326Q7008, focusing on a flange system/item. The CDRL outlines two specific data items that the contractor must submit:
Data Item A001 requires a Certificate of Compliance for Quality Certification, to be submitted one time with material delivery. Data Item A002 requires a Certification Data/Report for Chemical & Mechanical Certification, also to be submitted one time with material delivery. Both items are to be submitted under separate shipment numbers, with specific requirements including quantitative test results, evidence of correct specimen testing, and compliance with marking and certification requirements for Controlled Industrial Material. The requiring office is designated as Code 245, and the distribution statement is marked as "A". The document is prepared by Carl Cantara and approved by Steven W. Harmon, with a digital signature dated August 14, 2025.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Security Agreement For NNPI_DD FORM 2345.pdf | ||
| 26Q7008 RFQ Required amended.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. 000A B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM E. CONTRACT/ PR NO.
5274E254 SPMYM326Q7008
F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
HARMON.STEVE
N.W.1289406219
Digitally signed by
HARMON.STEVEN.W.12894062
Date: 2025.08.14 11:01:17 -04'00'
File details come from the government source that posted it. Updated .