Exhibit A.pdf
PDF 114 KB Posted
- Attached to
- WELD STUD
- Solicitation number
- SPMYM325Q9012
About this file
This is a Contract Data Requirements List (CDRL) for a weld stud procurement, containing two data items (A001 and A002) that must be submitted with material delivery. The first data item (A001) requires a Certificate of Compliance under DI-MISC-81356A, while the second data item (A002) requires Chemical and Mechanical Certification Data/Report under DI-MISC-80678.
The CDRL specifies that both items require one-time submission with the material delivery, with distribution to Code 133.2. Key requirements include quantitative test results in required units, separate shipment numbers for each data item, and specific fastener certification showing evidence of testing with new untested fasteners for wedge tensile and yield strength testing. The document is approved by Jason Laflamme on 12/06/2024 and prepared by Johnathen Farrington on 11/22/24.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined Synopsis Solicitation SPMYM325Q9012.pdf | ||
| Clauses and Provisions 25Q9012.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
245.2M-0313-25 (2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY
A TDP X TM OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
WELD STUD 43264001
1. DATA ITEM NO. 2. TITLE ofDATA ITEM 3. SUBTITLE
A001
CERTIFICATION OF QUALITY
CERTIFICATE OF COMPLIANCE COMPLIANCE
4. AUTHORITY (DATA Item Description Number) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC-81356A SECTION c'.'z CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES
REQUIRED
DD
One Time With Material DRAFT FINAL
A
8. APP.CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A N/A
SUBMISSION
N/A
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For payment & submission of data refer to clauses 252.232-7006 & 252.232- 15. TOTAL 0 1 0
7003 or 52.232-36. Each data item submitted by vendor must be submitted under a separate shipment number.
1.DATA ITEM NO. 2 TITLE of DATA ITEM 3. SUBTITLE
A002
CERTIFICATION DATA/ REPORT
CHEMICAL & MECHANICAL
CERTIFICATION
4. AUTHORITY 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
DI-MISC -80678 SECTION C. CODE 245
7. DD 250 REQ 9. DIST 10. FREQUENCY 12. DATE OF 1st 14. DISTRIBUTION
STATEMENT SUBMISSION
a. ADDRESSEE b. COPIES REQUIRED One Time DD With Material DRAFT FINAL
A
8. APP. CODE 11. AS OF DATE 13. DATE OF REG REPRO
SUBSEQUENT CODE 133.2 0 1 0
N/A
SUBMISSION
N/A N/A
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 ofDI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical & 15. TOTAL 0 1 0
Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-
7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC-80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material" apply.
G. PREPARED BY H. DATE I. APPROVED BY 245.2 J. DATE
12/6/202•
Uohnathen Farrington x5203 11/22/24 X Ja s o n L afla m m e 12/06/2024 245.2M
Sig n o o t, y: L ..,_FL /I M M E .JASO N .R .1 Z 5 5 7 1 6 5 5 6
0002-0003
File details come from the government source that posted it. Updated .