Exhibit 2 (Plans).pdf

This is a technical drawing/exhibit document prepared by the Oregon Department of Transportation for the Huntington Sand Shed Fencing Project, as part of the Oregon Statewide Imagery Program (OSIP). The document provides detailed plans and specifications for the removal of an existing gate and fence, with replacement of a 32-foot wide gate constructed of Schedule 40 galvanized steel pipe. The project involves removing the existing gate (approximately 32 feet wide consisting of two 16-foot panels hung on 8-inch steel posts) and installing a new gate with specified inset distances of approximately 60 feet on one side and 20 feet minimum on the other side. The drawing includes a gate detail specification sheet noting that all materials shall comply with current Oregon Standard Specifications, and provides technical specifications for the gate construction including 8-inch Schedule 40 galvanized steel pipe with end cap, finished grade chain link fabric, Schedule 40 galvanized steel pipe braces equally spaced with 5-foot embedment and concrete backfill. The new gate is designed to match the existing fence height and include a gate lock and latch mechanism.

No additional pricing, timeline, set-asides, incumbent information, funding sources, or contract terms are specified in this technical drawing document. The document is designated as Sheet 1 of 1 at Not-to-Scale (NTS) and includes a standard disclaimer noting that the selection and use of this standard drawing, while designed in accordance with generally accepted engineering principles and practices, is the sole responsibility of the user and should not be used without first consulting a Registered Professional Engineer.