EXHIBIT 1 - Specification # C59-2001PW-22.docx

DOCX document 28 KB Posted

Attached to
Trailer Mounted Pressure Washer
Solicitation number
RFQ 591 220000000360 1
Issued by
Oakland County, Ann Arbor City, Michigan

About this file

This is a specification document for a Request for Quote (RFQ) issued by the Maryland Department of Transportation (MDOT) for a trailer-mounted pressure washer, with RFQ number 220000000360 and specification number C59-2001PW-22. MDOT is seeking one new trailer-mounted pressure washer unit with all standard features in the latest model in current production. The specification references the North Star model 157597 as the baseline requirement but permits bidders to offer alternate makes and models with supporting product literature. Bidders must respond to each specification requirement with either confirmation or documented exceptions and alternatives.

The specification establishes comprehensive requirements across seven categories: base specifications including a two-year manufacturer's warranty; a gasoline-fueled commercial-grade 23.5 horsepower V-twin engine with standard safety and filtration components; a water pump system with 7 gallons per minute capacity at 4000 PSI with multiple safety devices; a 525-gallon water supply tank; a diesel or kerosene-fired burner unit with temperature control and thermal protection; and a complete accessory package including dual hose reels, high-pressure hoses, spray guns with nozzles, and chemical injection capability. The trailer component must feature a C-channel frame, tandem axles with 7000-pound gross vehicle weight rating, electric brakes with emergency breakaway switch, 15-inch heavy-duty tires, DOT-approved lighting, and a front-mounted toolbox. The document does not specify pricing terms, contract duration, award dates, or funding sources.

View the file

Other files

File Type Posted
RFQ 220000000360 Trailer Mounted Pressure Washer.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

EXHIBIT 1 – Specification # C59-2001PW-22 Request for Quote (RFQ) 220000000360 Trailer Mounted Pressure Washer All items specified and furnished by the Contractor shall be new, shall be of the latest model in current production, and shall include all standard features normally offered with these models.

Referenced make/model is North Star 157597. Bidder may offer alternates or exceptions to the referenced make/model. Product literature for the make/model offered must be provided with bid response.

Bidder’s Response: Indicate offered Trailer Mounted Pressure Washer:

Make:

Model:

Bidder must respond to each section with YES or NO (or enter additional information as requested). If NO is indicated, provide explanation and available option.

Bidder’s Response

1.0
Base Specifications:
1.1
Unit shall be manufacturer’s standard color
1.2
Unit shall have 2-year manufacturer’s warranty for parts and labor
2.0
Engine:
2.1
Gasoline fueled
2.2
Engine shall be a commercial grade, 23.5hp v-twin horizontal shaft
2.3
Engine shall be equipped with a spin on oil filter
2.4
Engine shall be equipped with a dry type air cleaner
2.5
Engine shall be equipped with low oil level shut down
2.6
Unit shall be equipped with a 12 volt battery
2.7
Unit shall be equipped with a weatherproof battery box
2.8
15 Gallon fuel tank - red in color
2.9
Fuel tank to be equipped with a fuel level gauge
2.10
Fuel tank to be equipped with a sealed fuel cap
2.11
Unit shall be equipped with a weather tight instrument control panel
3.0
Water Pump:
3.1
Unit shall be equipped with a TWS-7040 pump or equivalent
3.2
Pump shall have 7gpm @ 4000psi capacity
3.3
3.5gpm @ 4000psi capacity using 2 guns
3.4
Unit shall be equipped with a pressure safety device to relieve excess system pressure
3.5
Unit shall have adjustable water pressure regulator
3.6
Unit shall have high water temperature limit switch set to 200 degrees
3.7
Unit shall be equipped with water flow switch to shut down burner with no water flow
3.8
Pump shall be equipped with triple belt drive
3.9
Unit shall have serviceable water inlet filter
4.0
Water Supply Tank:
4.1
Tank must be a minimum 500-gallon capacity; MDOT’s preference is 525 gallon capacity
4.2
Tank shall be heavy grade plastic with outlet strainer
4.3
Tank shall be equipped with bottom drain valve
5.0
Burner Unit:
5.1
Burner to be diesel or kerosene fired
5.2
15 Gallon fuel tank - yellow in color
5.3
Burner fuel tank to be equipped with fuel level gauge
5.4
Burner fuel tank to be equipped with sealed fuel cap
5.5
Unit shall be equipped with fuel filter - water separator w/drain
5.6
Unit shall be equipped with adjustable water temperature thermostat
5.7
Unit will be equipped with weatherproof control panel with diagnostic lights
5.8
Unit will be equipped with burner maximum temperature thermal protection device
5.9
Unit will be equipped with heavy duty steel heat exchanger
5.10
Unit shall be equipped with water flow switch to shut down burner with no water flow
6.0
Accessories:
6.1
Unit will be equipped with two rear mount hose reels with roller guides
6.2
Unit will be equipped with two 3/8" x 150' high pressure hoses
6.3
Unit will be equipped with two high pressure guns with 48" lances
6.4
High pressure guns to have built in trigger safety latch to prevent accidental activation
6.5
Unit will be equipped with 5 different size quick connect nozzles per gun
6.6
Unit will be equipped with chemical/soap injector
7.0
Trailer:
7.1
Frame shall be constructed of C channel with I beam supports
7.2
Unit shall be equipped with full fenders
7.3
Unit shall be equipped with 2" ball coupler
7.4
Unit shall be equipped with two towing safety chains and hooks that meet FMCSA part 93 § 393.70
7.5
Unit shall be equipped with a 2000 pound manual jack
7.6
Unit shall have tandem axles with 7000 pound GVW rating
7.7
Unit shall be equipped with electric brakes on both axles with emergency breakaway switch
7.8
Unit shall have 15" heavy duty load range E tires with steel wheels
7.9
Trailer Lights: DOT approved tail, stop and turn, to be 2 lights.
7.10
Trailer connector shall be berg type 7 pin round J560 style
7.11
Trailer connector to be wired to match MDOT specifications
7.12
Unit shall be equipped with front cross mounted tool box 36"x17"x18"

File details come from the government source that posted it. Updated .