Excavator Salient Characteristics.pdf
PDF 142 KB Posted
- Attached to
- Spider Excavator and Attachments Federal contract opportunity
- Solicitation number
- 70LGLY21QGLB00122
About this file
This document contains a solicitation for a spider excavator and attachments from the Department of Homeland Security Federal Law Enforcement Training Center. The solicitation seeks firm fixed pricing for a Menzi Muck M545X spider excavator with air conditioning, 1500mm bucket, grading bucket, leak line, and rear view camera. Also required are a universal grapple, a Promac LDM50 with Lexan for the Menzi M545X excavator. Quotes are due no later than September 14, 2021 and must be submitted electronically to the identified email address. The solicitation is a 100% small business set-aside for NAICS code 333120 with a size standard of 750. Only quotes from small businesses will be considered and the equipment must be new with a manufacturer's warranty.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 70LGLY21QGLB00122 0001 Amendment.pdf | ||
| 70LGLY21QGLB00122.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics Spider Excavator
• Shall be an all-terrain, 4-wheel drive excavator commonly known as a “walking” or “spider” excavator, consisting of a boom, stick, bucket, and cab on a rotating platform
• Full width cab with one-piece curved glass for unobstructed visibility on a rotating platform
• Four equal size hydraulic stabilizers on chassis each individually adjustable vertically and horizontally (minimum 7ft heights, and from 7’8”-19’8” width)
• Four equal size hydrostatic driven wheels with forest tires
• Front, rear, 4-wheel, and crab/omnidirectional steering options
• Maximum width adjustment of the wheels shall be at a minimum of 6000mm for stability
• Central wheel bearing suspension
• Front mount boom assembly shall be mounted low for increased center of gravity and stability
• Boom cylinder shall be located beneath cabin and not under boom
• The boom cylinder shall be arranged horizontally in the center part or a comparable design with will stop collisions at the boom cylinder
• Analog/digital intuitive display for diagnostics and adjustable performances including attachment requirements
• The connection between boom and dipper shall have a linkage assembly which acts like a multiplayer for increased breakout/ripping force
• Bucket cylinder shall pivot mid-center position to enhance breakout force
• Water cooled Turbo Diesel Tier4 Final engine
• Load sensing hydraulic system
• Hydraulic hoses must be protected at the chassis and installed at the boom
• Hydraulic Cylinders on chassis shall have check valves
• Hydraulic Cylinders on boom shall have position damping
• Automatic parking brake required
• Substrate protector required
• Differential lock required
• Linear travel sensors in the steering cylinder required
• Active angle sensors required
• Electric chain collision protection
• Rear view camera
• Integrated air conditioning
• Maximum weight of machine excluding tools/attachments shall be 13500kg
• Maximum ground clearance fording depth of 2200 mm
• Maximum lifting force of 9800 KG S
• Maximum slewing speed of 10 rpm
• Minimum slewing torque of 52000 Nm gross
• Slewing range of 360°
• Warranty repair location within 350 miles of Glynco, Georgia 31524
File details come from the government source that posted it. Updated .