event 6976 CCSD ballistic shield specs 04202026.pdf
PDF 73 KB Posted
- Attached to
- Ballistic Shields - Cuyahoga County Sheriff SWAT
- Solicitation number
- 6976
- Issued by
- Ohio
About this file
This is a technical specification document for Level III Ballistic Shields required by the Cuyahoga County Sheriff's Department SWAT team in Ohio. The shields must be rectangular in shape with dimensions between 20" to 23" wide and 34" to 38" long, weighing no more than 25 lbs including all components. Each shield must feature a see-through ballistic viewport measuring at least 2.5" high by 8.5" wide, an integrated LED light with minimum 1000 lumens capacity offering off/on/strobe functionality, and a transport bag for protection and portability. The shields must meet or exceed NIJ Level III Ballistic Shield Standards and demonstrate special threat round testing capabilities against 7.62mm X 51mm (M80), 7.62mm X 39mm PS Ball (MSC), and 5.56mm X 45mm (M193) ammunition. Additional design requirements include a hard/solid primary handle system fixed horizontally to the shield, ballistic thickness of less than one inch (excluding viewport and light components), reinforced fasteners that maintain ballistic integrity, and padding on the backside below the handle to support operator forearms.
The specification document does not include information regarding pricing terms, quantities being procured, response deadlines, award dates, contract duration, funding sources, or set-aside provisions. These details would typically be contained in the associated solicitation or bid documents rather than in this technical specification file.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Event #6976
Level III Ballistic Shield Specs – Cuyahoga County Sheriff’s Department SWAT
• Must be rectangular in shape (corners may be rounded) – all flat sides to provide the largest coverage area
• No less than 20” wide by 34” long
• No more than 23” wide by 38” long
• No more than 25 lbs in total weight including viewport and light
• Must contain see through ballistic viewport o Viewport observation window must be no less than 2.5” high by 8.5” wide
• Must contain built in LED light with no less than 1000 lumens and off/on/strobe options, securely attached to the front side of the shield, with controls to activate/switch modes of the light securely attached to the rear side of the shield either affixed to the handle or reachable from the handle without releasing operators grip on the handle and able to be activated or modes switched with either hand
• Must include a transport bag to carry and protect shield when not in use
• Must meet or exceed NIJ level III Ballistic Shield Standards
• Must meet or exceed NIJ Level III Special Threat Round Testing for the following:
o 7.62mm X 51mm (M80) o 7.62mm X 39mm PS Ball (MSC) o 5.56mm X 45mm (M193)
• Ballistic Shield Thickness must be less than 1inch (viewport and light exempted) to provide improved performance through and around doorways
• Must have hard/solid primary handle system securely fixed in a horizontal position to the shield (no flexible handles accepted, unless in addition to and designed to be supplementary to the hard/solid primary handle system)
• Any fasteners that pass through the shield (handle/light/viewport hardware, etc.)
must be reinforced and not compromise the ballistic integrity of the shield or provide lesser ballistic protection than the shield.
• Must include padding on the backside of the shield below the handle to allow the user to rest their forearm on the padding rather than on the bare backside of the shield
File details come from the government source that posted it. Updated .