ESL21-001.pdf

USS EMORY S LND

( AS 39 )

SPONSOR RELATED CONTRACT NO. N40446-21-R-XXXX

ITEM NO. 0701 CATEGORY "A" 2021-04-08

Repair Ultra Low Air Hoist Riodique, Angelito

0701 - 1

1.0 ABSTRACT

1.1 This work item describes the requirements to repair, test and preserve Ultra Low

Air Hoist.

2.0 REFERENCE/ENCLOSURE

2.1 Reference: None

3.0 ITEM LOCATION/DESCRIPTION/QUANTITY:

3.1 Ingersoll Rand Hoist ULA050P/99054

3.2 Gardner Denver Tractor TATA04-1172

4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICE: None

5.0 NOTES:

5.1 The contractor and all subcontractors regardless of tier are advised to review and other work items under this contract to determine their effect on the work required under this work item. Many of the definitions relating to performance of this work item are found in Work

Item 001.

7.0 STATEMENT OF WORK REQUIRED

7.1 Contractor to provide labor and materials to disassemble, repair, assemble and test the equipment identified in 3.1

7.1.1 Contractor to procure and provide the following Contractor Furnished

Materials to repair the equipment identified in 3.1 and 3.2:

ITEM DESCRIPTION QUANTITY

Ingersoll Rand Breather, Norgen MV002A

Ingersoll Rand Bundle Hose-4 BTN 20

Ingersoll Rand Fitting Aeroquip #2021-8-8S

Ingersoll Rand Fitting, Nipple 0.75 NPT Close

Ingersoll

SPONSOR RELATED CONTRACT NO. N40446-21-R-XXXX

0701 - 2

Rand

Gasket

IR7G

Ingersoll Rand Gasket IR8G

Ingersoll Rand Muffler IR9M

Ingersoll Rand Cylinder

IR10C

Gear Case Gasket HLK-31

Vane Packet IR12VP

Brake Service Kit MLK-ABK1

Chain Link HLK, Zinc Plated

70 Feet

MLK Hoist Overhaul Kit

Hoist Testing Mount

Hoist Crate

16 Limit Switch 1

17 Air Distribution Block 1

18 Fittings 1

19 Chain Bag 1

20 Tractor Parts 1

21 Misc Parts MPT Fabrication 1

22 Filter Regulator Lubricator 1

7.2.4 Upon completion of repair, load test equipment and provide load testing certificate.

7.3 Equipment identified in 3.1 and 3.2 shall be prepared to SSPC-SP 10 Near White

Blast Cleaning. All areas that are not normally painted shall be protected from blasting operation.

7.4 Coatings Application

7.4.1 Ensure surfaces are clean, dry and free of oil, grease or residue from abrasive blasting.

SPONSOR RELATED CONTRACT NO. N40446-21-R-XXXX

0701 - 3

7.4.2 All coatings shall be prepared and applied in accordance with the manufacturers requirements outlined in the Product Data Sheets.

7.5 Reports

7.5.1 Upon completion of all repairs, inspections, and tests the contractor shall prepare & submit a report to include testing. They shall be typewritten reports documenting the examination of the system and final “as released” conditions. Submit three (3) typewritten copies of the report to the MSCREP.

7.6 Upon completion of repair and test, crate the equipment and shipped to:

MSC SSU GUAM

BLDG 3110/K1

US NAVAL BASE GUAM

SANTA RITA GUAM 96915

ATTN: ESL CHIEF ENGINEER/PORT ENGINEER

8.0 GENERAL REQUIREMENTS: Known Source

8.1 International Air Tool and Industrial

Supply Company

3574 Hanock Street

San Diego CA. 92110

Phone: 619-795-7955

FAX: 619-599-8880

E-Mail: info@intlairtool.com

8.2 Period of Performance: 15MAY-15JUN 2020

mailto:info@intlairtool.com