ESBD_File_334179_NO. 23-44 Water and Wastewater Supplies.pdf

Bid # 23-44 Page 1 of 40 Firm Name:____________________________ Initials:________

INVITATION FOR BID (IFB) NO. 23 - 44

“Water and Wastewater Supplies”

Table of Contents Tentative Schedule of Events Introduction General Instructions

Bid Submittals

Information Award Terms of Contract

Termination of Contract Special Terms & Conditions

Preparation of Bid

Written Modification Qualification of Responders

Addenda & Interpretations Laws and Regulations Obligation of Responder

Bid Tabulation

General Specifications

Scope of Services General Information

Delivery Pricing Emergency or out of stock deliveries

Material Specifications Group 1 - Brass Group 2 – Plastic Rectangular Black Meter Box w/ Plastic AMR Lid and Polytubing

Group 3 - PVC Fittings Group 4 – Cast Iron / Ductile Iron Mechanical Joints and Fitting Group 5 – Couplings, Clamps and Saddles

City of Huntsville 1220 11th Street Huntsville, Texas 77340 Lucy Gonzalez Phone: 936-291-5495 Email: lgonzalez@huntsvilletx.gov

Sealed solicitations shall be received no later than:

2:00 P.M., Central Daylight Time September 6, 2023

MARK ENVELOPE: “Solicitation Packet 23-44”

ALL PAGES MUST BE INITIALED AND RETURNED,

IF NOT BID MAY BE REJECTED.

RETURN SEALED IFB:

City of Huntsville City Secretary 1220 11th Street Huntsville, Texas 77340

Bid # 23-44 Page 2 of 40 Firm Name:____________________________ Initials:________

Group 6 - Gate Valves and Fire Hydrants

Group 7 – Castings General Contractor Requirements

Pricing Table Additional Pricing Information Not Specifically Listed on Bid

Insurance Requirements

Required Forms Conflict of Interest Certificate of Interested Parties Form 1295 Israel Verification Form Iran, Sudan and Foreign Terrorist Organizations Verification Form

Firearm Verification Form Prohibition of Contracts Discriminating Against Energy, & Energy Company Boycott Verification

Form

Critical Infrastructure Verification Form Texas Public Information Act Verification Form References Non-Collusion Affidavit

Bid Term & Conditions No-Bid Statement

Responders Information

Tentative Schedule of Events

August 26 and September 2, 2023 – Legal Advertisement Dates

August 21, 2023 – Release Bid

August 28, 2023 – Questions Due to Procurement Manager

September 6, 2023 at 2:00 P.M. – Public Bid Opening

September 2023 – Award Preparation

Introduction The City of Huntsville is re-advertising IFB 23-52 “Water and Wastewater Chemicals” and is currently accepting solicitations in accordance with Local Government Code Chapter 252. The City of Huntsville is aware of the time and effort you expend in preparing and submitting bids and proposals to the City. Please let us know of any solicitation requirements which are causing you difficulty in responding. We want to make the process as easy and painless as possible so that all responsible vendors can compete for the City's business.

General Instructions Sealed bid packets must be delivered to Attention of:

City Secretary, City of Huntsville 1220 11th Street, Huntsville, TX 77340.

Bid Packets must be received by

September 6, 2023 at 2:00 P.M. Central Daylight Time

It is the sole responsibility of responder to have packet at designated location prior to the deadline date and time. Each response must be sealed in an opaque envelope which has been clearly marked “Solicitation

Bid # 23-44 Page 3 of 40 Firm Name:____________________________ Initials:________

Packet 23-44”. Responses received after September 6, 2023, 2:00 P.M. will not be considered for the award of the contract and shall be considered void and unacceptable. It is the responsibility of the responder to ensure that the solicitation packet is delivered to the designated location before the deadline.

All late packets will be returned to responder unopened when properly marked. Public reading is scheduled to be held at the date and time listed above at City Hall, 1220 11th Street, Huntsville, Texas.

You are invited to attend.

All questions concerning the solicitation should be directed to the Procurement Manager, Lucy Gonzalez at e-mail lgonzalez@huntsvilletx.gov.

Bid Submittals Bidders submitting a response do so entirely at their expense. There is no expressed or implied obligation by the City of Huntsville to reimburse any individual or firm for any costs incurred in preparing or submitting a bid, for providing additional information when requested by the City of Huntsville, or for participating in any selection interviews.

Information Details on which commodities and services we purchase or have for sale is available from the Purchasing

Department. You may register on the City’s vendor management program at www.huntsvilletx.gov/bids to receive notice of bid opportunities. Additionally, you may register at www.publicpurchase.com.

Award The City of Huntsville reserves the right to award to the most responsible and responsive bidder in the best interest of the City based on price and/or based on best value meeting the requirements for this service.

The City reserves the right to consider items such as safety record, references, previous performance, delivery time or a criteria specific to this project which the city considers weighted. The City may award to multiple providers or to a single provider. If the awarded responder is unable to meet the requirements of the City, services/products may be purchased from the next best available responder and continue until a responder is found that can complete the requirements of the City of Huntsville. The City reserves the right to order from another vendor in which the City determines an emergency or urgent need becomes necessary. The City of Huntsville has the sole, last and final determination to determine award. The City reserves the right to reject any bids that do not meet specifications stated herein or reject all bids should this project not be approved for any reason.

*Best Value: An assessment and/or award based on analysis of the total life cycle of the item. Combination criteria which can be used are:

price, quality of item, location of responder, safety record of responder, past relationship with responder, and/or any relevant criteria specifically listed.

Terms of Contract

The term of this contract shall be effective for a period of one (1) year from date of purchase order on or around September 29, 2023 – September 28, 2024, with the option to renew for one (1) additional year from September 29, 2024 – September 28, 2025. This option to extend is contingent on budget availability and City Council approval and set to expire September 28, 2025.

Renewal period will be as follows:

Original: September 29, 2023 thru September 28, 2024

1st Renewal: September 29, 2024 thru September 28, 2025

If renewed or extended, each renewal/extension will be subject to the same terms and conditions as the original contract, and any changes issued thereof.

Price increases or decreases not to exceed 10% of the original contract or changes issued thereof may only be allowed at the time of renewal or extension.

mailto:lgonzalez@huntsvilletx.gov http://www.huntsvilletx.gov/bids http://www.publicpurchase.com/

Bid # 23-44 Page 4 of 40 Firm Name:____________________________ Initials:________

Price escalation will be allowed for line items 353-376 ONLY.

Price escalation renewal period for line items 353-376 ONLY will be as follows:

TERM: September 29, 2023 - September 28, 2024

Original: September 29, 2023 thru December 29, 2023

1st Escalation Renewal: December 29, 2023 thru March 29, 2024

2nd Escalation Renewal: March 29, 2024 thru June 29, 2024

3rd Escalation Renewal: June 29, 2024 thru September 29, 2024

1st Renewal: September 29, 2024 – September 28, 2025

4th Escalation Renewal: September 29, 2024 thru December 29, 2024

5th Escalation Renewal: December 29, 2024 thru March 29, 2025

6th Escalation Renewal: March 29, 2025 thru June 29, 2025

7th Escalation Renewal: June 29, 2025 thru September 29, 2025

Termination of Contract

The City or the Contractor shall have the right to cancel at any time for any reason on thirty (30) day written notice. The City of Huntsville reserves the right to terminate this agreement if, in the opinion of the

City of Huntsville, the successful vendor’s performance is not acceptable, or if the deliveries and servicing of this contract do not conform to the requirements detailed herein. If though any cause, the vendor fails to fulfill its obligations, or if the vendor violates any of the agreements of this bid, the City has the right to terminate by giving the successful responder thirty (30) calendar days-written notice. During the thirty-day notification period, the City reserves the right to contact and award to other firms. The vendor will be compensated for the satisfactorily deliveries performed before the termination date. Contract may be terminated immediately should there be any illegal or unprofessional activities, alleged or otherwise, occurring or suspected of occurring.

Special Terms & Conditions

It is understood that the City of Huntsville, Texas reserves the right to reject any or all products, services and/or qualification for any or all products and/or services covered in this solicitation and to waive informalities or defects or to accept such qualifications as it shall deem to be in the best interests of the

City of Huntsville. If less than three responses are received, the City of Huntsville reserves the right to rebid as it deems to be in the best interest of the City. Each elected responder will receive a purchase order as prices quoted. Responders must be able to complete the job within a reasonable time of request for service. Should awarded responder not be able to respond, the City reserves the right to offer service to next available responder. The City of Huntsville reserves the right to make the award of bid line items in whole, parts or to reject any and all bids or bid line items if it is determined to be in the best interest of the

City. The Bid Terms and Conditions reference any and all indemnification language that is required and not stated to the fullest extent of the law. The City of Huntsville has the sole last and final determination to determine award with no recourse to the fullest extent of the law.

Preparation of Bid Each bid must be submitted on the prescribed form. All blank spaces for prices must be filled in, in ink or typewritten and must be fully completed and executed when submitted. If the unit price and the total amount named for an item are not in agreement, the unit price alone will be considered as representing the responder's intention and the total will be corrected to conform thereto. The responder must sign their solicitation in the space provided on the responder’s form. If the bid is submitted by a partnership or corporation, the name and address of the partnership or corporation must be shown, together with the name and address of the partners or corporate officers. Bids submitted by a partnership must be signed by one of the partners. Bids submitted by a corporation must be signed by one of the corporate officials

Bid # 23-44 Page 5 of 40 Firm Name:____________________________ Initials:________ having, under the corporate structure, the power to act in this capacity. Bids submitted by a sole proprietorship must be signed by the proprietor.

Written Modification Any responder may modify their bid by letter, electronic or other written communication at any time prior to the scheduled closing time for receipt, provided such written communication is received by the City prior to the closing time, and provided further, the City is satisfied that the written modification bears the signature of the responder. The written communication should not reveal the bid price but should provide the addition or subtraction or other modification so that the final prices or terms will not be known by the

City until the sealed bid is opened. It is the responsibility of responder to ensure modification was received by the City.

Qualification of Responders No prequalification of responders is required. Before award of any contract can be approved, however, the City shall be satisfied that the responder involved: (1) maintains a permanent place of business, (2) has adequate plant and equipment to do the work properly and expeditiously, (3) has a suitable financial status to meet obligations incident to the work, (4) has appropriate technical experience, and (5) can submit a satisfactory performance record.

Addenda & Interpretations No interpretation of the meaning of the plans, specifications or other pre-bid documents will be made to any responder orally.

Every question or request for interpretation concerning the solicitation shall be directed to the Procurement

Manager, Lucy Gonzalez in writing via e-mail at lgonzalez@huntsvilletx.gov or sent via mail addressed to the Purchasing Department at 448 SH 75 North, Huntsville, Texas 77320. All questions or request for interpretation must be received by August 28, 2023 @ 5:00 P.M. as addressed above. All questions or requests for interpretation concerning the solicitation received after August 28, 2023 @ 5:00 P.M. will be considered void and unacceptable.

A written addenda will be issued as a response and will be posted on or before August 30, 2023 @ 5:00

P.M. on the City of Huntsville website, Public Purchase website and Electronic State Business Daily website. All addenda so issued shall become part of the contract documents, and receipt thereof shall be acknowledged in the space provided in the solicitation document. It is the responsibility of the responder to verify all addendums and interpretations.

Laws and Regulations The responder's attention is directed to the fact that all applicable State laws, municipal ordinances, and the rules and regulations of all authorities having jurisdiction shall apply to the award throughout, and they will be deemed to be included in the bid document the same as though herein written out in full.

Obligation of Responder At the time of the opening of the bid each responder will be presumed to have inspected the site and to have read and to be thoroughly familiar with the plans and contract documents (including all addenda).

The failure or omission of any responder to examine any form, instrument or document shall in no way relieve any responder from any obligation in respect of his bid.

Bid Tabulation To obtain bid tabulation results, please log on to our website at http://www.huntsvilletx.gov/business/bids_and_rfps/bid_tabulations/. If you have any other questions, please contact the Procurement Manager, Lucy Gonzalez at (936) 291-5495 or e-mail lgonzalez@huntsvilletx.gov.

http://www.huntsvilletx.gov/business/bids_and_rfps/bid_tabulations/ mailto:lgonzalez@huntsvilletx.gov

Bid # 23-44 Page 6 of 40 Firm Name:____________________________ Initials:________

General Specifications Scope of Services The City of Huntsville is accepting competitive sealed bids for water and wastewater fitting & supplies to be used in City water and wastewater projects. The intent of the City is to establish an annual fixed price per each item for the periodic purchase of water and wastewater supplies in accordance with the no-lead brass fitting AWWA regulations.

General Information Delivery All orders specifying delivery will be made accordingly to the specifications for each type of material described in the bid.

In those rare cases where a department needs a particular material immediately and the awarded vendor cannot supply in the time frame requested, The City of Huntsville reserves the right to purchase such material from the next responsive and responsible bidder or on the open market without endangering this agreement.

The successful bidder shall not deliver material or provide services as part of this agreement without a purchase order issued by the City.

All deliveries must be made and completed between 8:00 am and 3:30 pm Monday through Friday 450

Highway 75 N Huntsville, TX 77320 unless otherwise stated in particular purchase order.

All delivery tickets are to have delivery location/address noted.

Pricing Pricing shall incorporate the cost of the material, delivery, and all related charges including, but not limited to fuel surcharge, environmental, drop ship charges, demurrage, or any extraneous charge. Prices shall exclude State Sales Tax and Federal Excise Tax.

Emergency or out of stock deliveries In case of emergency experienced by the City, the vendor is requested to supply the needed material immediately, if possible. In the case of emergency orders the awarded vendor is allowed to charge up to a

$50.00 (fifty dollars) freight fee for same day delivery. If the vendor cannot respond to an emergency or encounters an out of stock situation, the purchase can be made on the open market. All such purchases shall not be considered a breach of contract by the City.

Material Specifications Specification may reference name brands, it is not the intent of the City of Huntsville to restrict these bids in such cases, but to establish a desired quality level of merchandise or to meet a pre-established standard due to like existing items. Responder may offer items of equal quality and performance, with the burden of proof of such equivalence on the subject bidder. The City of Huntsville shall act as sole judge in determining equality and acceptability of products offered, and reserves the right to reject a product if the

City has directly experienced poor field performance with said product.

• All products must be domestic except where noted in price table (Cast Iron/Ductile can be imported) and include bolts, nuts, gaskets, etc.;

• All pipe and supplies must meet AWWA and ASTM standards;

• There is no guarantee of order quantities or annual purchase amount;

Bid # 23-44 Page 7 of 40 Firm Name:____________________________ Initials:________

• All materials to meet or exceed the AWWA latest revisions to the CDA (Copper Development

Association) to include numbers C800, C89520 and C89833 concerning lead reduction/contents;

• All components must meet or exceeds NSF 61 standards

Group 1 - Brass

Section A - Waterworks Brass

All brass including the ball in contact with potable water will be heavy wall design made of no lead material as defined in section 4 of current C800 specification. Parts not in contact with potable water may be made of other material suited for buried water services as specified in AWWA C800.

Treading and tolerances will be in accordance with latest revisions of AWWA C800 specifications. All

Ball valve, Couplings and adaptors will be pressure rated for 300 PSI. Ball valves will be supplied with blowout proof stainless steel stems with double SBR, NBR or EPDM O-ring stem seal. Stem and cap assembly will be two-piece design and will withstand minimum 200 ftp of torque. Ball seats will be made with unfilled Teflon for resilience and minimal friction. Ball will be uncoated lead free cast brass design. All ball valves will be factory tested in the open and closed position. All waterworks fittings and ball valves will be guaranteed for a minimal 40 years against factory defects. All fittings will have a lifetime guarantee against lead leachate from the casting. “Washed” brass will not be acceptable. No lead fittings will be Cambridge Brass or approved equal.

Section B - Malleable Brass Fittings and Nipples

All brass in contact with potable water will be heavy wall design made of no lead material as defined in section 4 of current AWWA C800 specification. Parts not in contact with potable water may be made of other material suited for buried water services as specified in AWWA C800. Treading and tolerances will be in accordance with latest revisions of AWWA C800 specifications.

Group 2 – Plastic Rectangular Black Meter Box w/ Plastic AMR Lid and Polytubing

The Meter Box and Lids listed in this section shall be designed to withstand loading in nondeliberate and incidental traffic. Meter Box and Lid shall be black and constructed out of modified polyethylene material for maximum durability and corrosion resistance. The black material is for maximum UV protection. The black material shall be uniform throughout the Meter Box and Lid for maximum longevity and not have a foaming agent that creates air pockets within the plastic wall.

SERIES 65C SOLID BLACK POLYMER AMR LID, (DFW65C-SBSM-LID)

Size: H 1-7/8” x W 15-1/4” x L 26-7/8”

Vertical and Lateral Load Rating:

Compliant with AASHTO, Design Load of H-10; ASTM C 857-95, Design Load of A-8, 8,000 lbs., transferred through a 10" x 10" steel plate centered in the cover and body.

Compliant with AASHTO, Design Load of H-20: ASTM C 857-95, Design Load of A-16, 16.000 lbs., transferred through a 10" x 20" steel plate centered on the cover and body.

This product is designed to withstand H-10 and H-20 loading in non-deliberate or incidental traffic areas.

Polymer AMR/AMI Lid:

The Polymer lid shall be black and have a molded finger hole.

The Polymer lid shall seat securely and evenly inside the Meter Box and shall not overlap the top edge of the Meter Box.

The Polymer lid shall have two (2) molded slide mount brackets for placement of AMR device.

The Polymer lid shall have molded tread-pattern for skid resistance - tread dimensions shall be

.188 x .938 x .150 deep.

The Polymer lid shall retrofit existing concrete meter boxes with similar dimensions and be able to adjust in the field.

Bid # 23-44 Page 8 of 40 Firm Name:____________________________ Initials:________

The Polymer lid shall be recycled with a minimum of 50% Post Consumer Recycled and 50%

Post industrial/ Pre Consumer Recycled Content - Verified with a LEED PRODUCT

CERTIFICATION marked on the lid.

12" STANDARD PLASTIC RECTANGULAR BLACK BOX W/ PLASTIC READER LID

SERIES 1200 SOLID BLACK POLYMER AMR LID, (DFW1200.SBAMR.LID)

Size: H 1-3/8” x W 11-3/16” x L 16-7/16”

Plastic Lid with AMR Slide Mount

The Plastic lid shall have a MINIMUM weight of 2.50 lbs.

The Plastic lid shall be BLACK

The Plastic lid shall have a 7-1/2” x 7-7/16” slide mount attached with stainless steel screws.

The Plastic slide mount shall have a molded gate for ease of installation.

The Plastic lid shall seat securely and evenly inside the Meter Box

The Plastic lid shall have molded diamond tread-pattern for skid resistance

The plastic body shall be recycled with a minimum of 50% Post Consumer Recycled and 20%

Post Industrial/ Pre Consumer Recycled Content- Verified with a LEED PRODUCT

CERTIFICATION marked on the lid.

SERIES 1300 SOLID BLACK POLYMER METER BOX, (DFW1300.SB.BODY)

Size: H 12” x W Top - 12-5/16” x L Top – 17-9/16”

Black Plastic Body

The Plastic body shall have a MINIMUM weight of 7.65 lbs.

The Plastic body shall be BLACK.

The plastic body wilt have pipe slots on each end of the box that measure – 2-1/2” x 3-1/2"

The plastic body shall have support ribbing at the base and lid opening for resistance to backfilling- as illustrated.

The plastic body shall be recycled with a minimum of 75% Post Consumer Recycled and 25%

Post Industrial/ Pre Consumer Recycled Content- Verified with a LEED PRODUCT

CERTIFICATION marked on the box.

POLY TUBING

Tubing shall be NSF certified and is manufactured to meet ASTM Standard D2737 for Water Service

Tubing and D2239 ID Controlled for Iron Pipe Sizes and D3035 for OD Controlled Iron Pipe Size.

Poly tubing shall be High Density made from PE4710 resin, providing the highest strength pipe at the lightest weight. The manufacturer warranty shall be no less than 40 years against rot, rust, electrolytic corrosion, and defects in workmanship and materials.

Group 3 - PVC Fittings

Schedule 40 PVC Fittings

Fittings shall be manufactured from virgin rigid PVC (polyvinyl chloride) vinyl compounds with a Cell

Commodity Code: 340-60; 658-00; 659-00; 670-00; 890-00 IFB # 12-001 Water & Wastewater Fittings and Supplies Class of 12454 as identified in ASTM D 1784.

PVC DWV Solvent Weld Fittings

4” through 12” injection molded solvent weld Drain, Waste, and Vent (DWV) fittings shall be manufactured in accordance with ASTM D2665, F1866, F2135. Solvent weld DWV fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D2665, F1866, and ASTM

F2135, as applicable; and they shall be certified by the International Association of Plumbing and

Municipal Officials (IAPMO) to meet the requirements of the Uniform Plumbing Code (UPC), as applicable.

SDR 35 PVC Solvent Weld Sewer Fittings

4” through 12” injection molded solvent weld SDR 35 sewer fittings shall be manufactured in

Bid # 23-44 Page 9 of 40 Firm Name:____________________________ Initials:________ accordance with ASTM D 3034 and CSA B182.2. They shall be molded from virgin PVC compound having a minimum cell classification of 12454-B in accordance with, and certified by the National

Sanitation Foundation (NSF), to meet ASTM D 1784. Solvent weld SDR 35 sewer fittings shall be certified by the National Sanitation Foundation (NSF) to meet ASTM D 3034 and, in applicable configurations by the International Association of Plumbing and Municipal Officials (IAPMO) to meet

ASTM D 3034.

SDR 35 PVC Gasketed Sewer Fittings

4” through 12” injection molded gasketed SDR 35 sewer fittings shall be manufactured in accordance with ASTM D 3034, ASTM F1336. They shall be injection molded from virgin PVC compound having a cell classification of 12454 or 13343 in accordance with, and certified by the National Sanitation

Foundation (NSF), to meet ASTM D 1784. Gaskets shall be manufactured in accordance with ASTMF

477 or ASTM F 913. Gaskets shall be firmly seated in fitting in order to ensure proper installation and to prevent dislocation or misalignment during system assembly. Gaskets are to be in place at each opening.

Gasket joints must comply with ASTM D 3212 Internal Pressure Test (exfiltration) and Vacuum Test

(infiltration) at 5 degrees of gasket joint deflection. Where available, reducing branches on injection molded 8”, 10”, and 12” tees, wyes, and tee-wyes shall be minimum DR18 wall thickness in the reducing branch body and reducing branch hub below the gasket race. Gasketed SDR 35 sewer fittings shall be certified by the National Sanitation Foundation (NSF) and, in applicable configurations, by the

International Association of Plumbing and Municipal Officials (IAPMO) to meet ASTM D 3034.

SDR 26 PVC Heavy Wall Gasketed Sewer Fittings

4” through 18” gasketed SDR 26 sewer fittings shall be manufactured in accordance with ASTM D

3034 and F 1336. Fitting gaskets shall comply with ASTM F 477 or ASTM F 913. Fitting gaskets shall be locked firmly in position to prevent displacement. 4” through 8” fittings shall be injection molded from virgin PVC compound having a minimum cell classification of 12454 or 13343 in accordance with and certified by the National Sanitation Foundation (NSF), to meet ASTM D 1784.

10” through 15” gasketed SDR 26 sewer fittings may be injection molded or fabricated from pipe meeting the requirements of ASTM D 3034. Gasket joints of all fitting sizes must comply with ASTM

D 3212 Internal Pressure Test (exfiltration) and Vacuum Test (infiltration) at 5 degrees of gasket joint deflection. Gasketed SDR 26 sewer fittings shall be certified by the National Sanitation Foundation

(NSF) to meet ASTM D 3034.

Fernco Fittings

This specification describes material and physical requirements for non-rigid PVC preformed molded and spliced gaskets used in mechanical couplings. These couplings are used in gravity flow drain, waste, and vent (DWV), sewer, sanitary, and storm plumbing systems. They include couplings to join similar and dissimilar piping sizes and piping material.

Group 4 – Cast Iron / Ductile Iron Mechanical Joints and Fitting

CAST IRON/DUCTILE IRON FLANGED FITTINGS

Material: Cast Iron: ASTM A48, Grade 25B (2” - 14”) / Grade 30B (16” - 54”)

Ductile Iron ASTM A536

Pressure: 250 PSI Water Working Pressure for Cast Iron sizes 2” - 12”

250 PSI Water Working Pressure for Ductile Iron sizes 2” - 48”

150 PSI Water Working Pressure for Cast Iron sizes 14” - 54”

150 PSI Water Working Pressure for Ductile Iron sizes 54” - 64”

Testing: In accordance with ANSI / AWWA C110 / A21.10

Laying Length: In accordance with ANSI / AWWA C110 / A21.10

Cement Lining: In accordance with ANSI / AWWA C104 / A21.4

Coating: Inside - Tar coated (bituminous) in accordance with ANSI / AWWA C104 / A21.04

Outside - Red or Black Primer.

Approvals: 2”-16” Underwriters Laboratories listed and Factory Mutual Approved.

Bid # 23-44 Page 10 of 40 Firm Name:____________________________ Initials:________

Standards: ANSI / AWWA C110 / A21.10

Ductile Iron Mechanical Joint Fittings Class 350

Material: Ductile Iron ASTM A536

Pressure: 350 PSI WATER WORKING PRESSURE (CLASS 350) 3” - 24”: &

250 PSI 30” - 48”

Testing: In accordance with ANSI / AWWA C153 / A21.53 & UL - FM requirements

Laying Length: Short body design - straight section of body deleted to provide a compact and lighter fitting without reducing strength or flow characteristics, in accordance with

ANSI / AWWA C153 / A21.53

Cement Lining: In accordance with ANSI / AWWA C104 / A21.4 COATING: Tar coated

(bituminous) inside and out in accordance with ANSI / AWWA C104 / A21.4

Gaskets: SBR in accordance with ANSI / AWWA C111 / A21.11

T-Bolts: Low Alloy corrosion resistant high strength steel in accordance with ANSI / AWWA

C111 / A21.11

Approvals: 3”-16” Underwriters Laboratories listed and Factory Mutual Approved.

Standards: Certified to NSF61 Standard ANSI / AWWA C153 / A21.53 for Compact Ductile

Iron Fittings 3”-48” for water and other liquids.

Group 5 – Couplings, Clamps and Saddles

Couplings

Shall be ductile iron epoxy coated, rating up to 300 PSI, gasket ranges embossed on each gasket for identification, low alloy bolts and heavy hex nuts.

Saddles

The saddle body must be double-strap, two (2) per saddle brass and meet or exceed ASTM A 536, Grade

65-45-12. Straps shall be Type 304 (18-8) heavy gauge brass per ASTM A 240. Pressure ratings shall be as follows: Ductile iron, cast iron and steel pipe: rating of pipe up to 350 psi maximum, pipe sizes up through 24 inch, larger than 24 inch Commodity Code: 340-60; 658-00; 659-00; 670-00; 890-00 IFB # 12-

001 Water & Wastewater Fittings and Supplies 15 up to 30 inch pressure rating is 150 psi. PVC and asbestos cement pipe; rating of pipe, PVC up to 305 psi. Accepted manufacturer includes Cambridge or equal.

Repair Clamps

Clamps shall be stainless steel full circle double band, multi-range clamps with correct labeling on the clamp and box for identification. The lugs shall be ductile iron, epoxy coated, and gridded. Bolts and nuts shall be High strength low alloy steel track head bolts with at least one 7” starter bolt with 1” tall nut.

Gasket material shall be of virgin SBR rubber compounded for water and sewer service in accordance with

ASTM D 2000 MAA 610. Accepted manufacturers include Smith Blair or equal.

Group 6 - Gate Valves and Fire Hydrants

Gate Valves

Valves shall be right-hand close and meet or exceed ANSI/AWWA C509 (latest version). The wedge shall be fully encapsulated, inside and out, with EPDM rubber. The stem shall have two O-ring seals above the thrust collar and one below. The upper two O-rings must be replaceable with the valve under full working pressure. The stem material shall be stainless steel, and must not contain any zinc, aluminum, or lead. The waterway shall be full nominal size, without depressions, projections, or cavities. All Ferrous parts of the valve shall be coated and lined with a fusion bonded epoxy coating applied at the manufacturer’s location.

All epoxy coatings shall be in accordance with ANSI/AWWA C550 (Latest Version) and ANSI/NSF-61

Certified. All bolts and washers shall be stainless steel. In addition, bonnet bolts shall be installed by the

Manufacturer so as to not be exposed to the environment. All gaskets shall be of the O-ring style. The bonnet gasket shall fully encapsulate the bonnet bolts so that the threads between the bonnet and the body are neither exposed to the environment or the water inside the gate valve. All valves shall be hydraulically

Bid # 23-44 Page 11 of 40 Firm Name:____________________________ Initials:________ tested and both sides of the closed wedge to full rated working pressure and against the body to twice the rated working pressure. Where applicable, all valves shall be UL Listed, ULC Listed, and FM Approved.

All valves shall be covered by a manufacturer’s 10 Year Limited Warranty. All valves shall be as manufactured by Mueller or equal.

Fire Hydrants

Fire hydrants shall meet or exceed ANSI/AWWA C503. Hydrants shall be UL/ULC listed and FM approved. Hydrants shall be covered by a manufacturer’s 10 year limited warranty and a 10 year unconditional warranty on the main valve. All hydrants shall be model 2700/2780 Series as manufactured by Mueller, Kennedy, American Darling or equal.

Group 7 – Castings

Sanitary/Storm manhole covers

Covers shall be 23-1/2” or 32” as specified by line items listed below.

General Contractor Requirements

• The contractor shall have adequate inventory or resources to fulfill the City’s orders within the delivery or service times specified on the bid solicitation;

• Contractors submitting bids should be located within a reasonable radius of the City of Huntsville in order to facilitate prompt delivery;

• Contractor shall be required to maintain or have available the sufficient personnel, equipment, and supplies to perform “on time” deliveries to the City;

• All equipment utilized to make deliveries of any material stated herein shall conform to all State of

Texas Department of Transportation, and other applicable local, State, and Federal regulations;

• No minimum orders by quantity or dollar amount shall be established;

• Contractor shall have sufficient financial resources to provide continual services throughout the contract period;

• Contractor must have all pertinent permits for the business operation and meet all local, state, and federal rules and regulations.

Pricing Table

Department Materialuid Description Material

Requirement Line Unit Price

WasteWater 221-2202-0100 32" MANHOLE AND LID A 1

WasteWater 221-2202-0200 CLEAN OUT BOOT A 2

WasteWater 221-2202-0300 CLEAN OUT BOOT LID A 3

WasteWater 221-2202-0400 10" ADAPTER RUBBER CLAY TO PVC A 4

WasteWater 221-2202-0500 10" WING NUT PLUG A 5

WasteWater 221-2202-0600 12" ADAPTER RUBBER PVC TO PVC A 6

WasteWater 221-2202-0700 12" ADAPTERS RUBBER CLAY TO PVC A 7

WasteWater 221-2202-0800 12" X 2" PLUG AIR INFLATABLE TEST A 8

WasteWater 221-2202-0900 15" ADAPTER RUBBER CLAY TO PVC A 9

WasteWater 221-2202-1000 22-1/2" BEND PVC A 10

WasteWater 221-2202-1100 4" ADAPTER RUBBER CLAY TO CI/PVC A 11

WasteWater 221-2202-1200 4" ADAPTER RUBBER PVC TO PVC A 12

WasteWater 221-2202-1300 4" ADAPTER SCH 40 A 13

WasteWater 221-2202-1400 4" BEND PVC 45 SCH 40 A 14

Bid # 23-44 Page 12 of 40 Firm Name:____________________________ Initials:________

WasteWater 221-2202-1500 4" BEND PVC 90 SCH 40 A 15

WasteWater 221-2202-1600 4" COUPLING PVC DWV A 16

WasteWater 221-2202-1700 4" FEMALE ADAPTER PVC DWV A 17

WasteWater 221-2202-1800

4" FLEXIBLE SEWER SADDLE TEE W/ 51" STAINLESS

BANDS

A 18

WasteWater 221-2202-1900 4" MALE PVC DWV PLUG A 19

WasteWater 221-2202-2000 4" TEE PVC SCH 4 DWV A 20

WasteWater 221-2202-2100 4" X 4" X 4" TEE PVC TWO WAY CLEANOUT SCH 40 DWV A 21

WasteWater 221-2202-2200 51" STAINLESS BAND WITH FLIP OUT SCREW A 22

WasteWater 221-2202-2300 6" ADAPTER RUBBER PVC TO PVC A 23

WasteWater 221-2202-2400 6" ADAPTER RUBBER CLAY TO PVC A 24

WasteWater 221-2202-2500 6" BEND PVC 90 SDR 35 A 25

WasteWater 221-2202-2600 6" WING NUT PLUG A 26

WasteWater 221-2202-2700 6" WING NUT PLUG A 27

WasteWater 221-2202-2800 6" X 2" PLUG AIR INFLATABLE TEST A 28

WasteWater 221-2202-2900 6" X 22-1/2" BEND PVC SDR35 A 29

WasteWater 221-2202-3000 6" X 4" TEE PVC SDR 35 A 30

WasteWater 221-2202-3100 6" X 4" WYE SDR 35 A 31

WasteWater 221-2202-3200 6" X 45" BEND GASKET PVC SDR35 A 32

WasteWater 221-2202-3300 6" X 6" X 6" TEE PVC SDR 35 A 33

WasteWater 221-2202-3400 8" ADAPTER RUBBER CLAY TO PVC A 34

WasteWater 221-2202-3500 8" ADAPTER RUBBER PVC TO PVC A 35

WasteWater 221-2202-3600 8" BEND PVC 45 SDR35 A 36

WasteWater 221-2202-3700 8" TEE GASKET PVC SDR 35 A 37

WasteWater 221-2202-3800 8" X 2" PLUG AIR INFLATABLE TEST A 38

WasteWater 221-2202-3900 8" X 22-1/2" BEND PVC SDR 35 A 39

WasteWater 221-2202-4000 8" X 4" TEE GASKET PVC SDR35 A 40

WasteWater 221-2202-4100 8" X 6" WYE SDR 35 A 41

WasteWater 221-2202-4600 2" X 26" CONCRETE ADJUSTMENT RING A 42

WasteWater 221-2202-4700 23-1/2" MANHOLE LID A 43

WasteWater 221-2202-4800 23-1/2" MANHOLE RING A 44

WasteWater 221-2202-4900 23-1/4" MANHOLE ADJUSTMENT RISER RING A 45

WasteWater 221-2202-5000 24" MANHOLE LID A 46

WasteWater 221-2202-5100 24" MANHOLE RING A 47

WasteWater 221-2202-5200 24" MANHOLE RING A 48

WasteWater 221-2202-5300 4' MANHOLE FIBERGLASS A 49

WasteWater 221-2202-5400 6' MANHOLE FIBERGLASS A 50

WasteWater 221-2202-5600 8' MANHOLE FIBERGLASS A 51

WasteWater 221-2202-5800 REVERSIBLE RING A 52

WasteWater 221-2202-5900 STORM COVER A 53

WasteWater 221-2202-6000 ROOT BE GONE A 54

WasteWater 221-2202-6100 STOP LEAK HYD CEMENT A 55

Water 220-2202-0020 3/4" X 100' TUBING ENDOTRACE A 56

Water 220-2202-0040 1" X 100' TUBING ENDOTRACE A 57

Water 220-2202-0060 3" FLANGE A 58

Water 220-2202-0080 4" ELL BEND 90 MJ A 59

Water 220-2202-0100 4" GATE VALVE MJ LESS/ACC D 60

Bid # 23-44 Page 13 of 40 Firm Name:____________________________ Initials:________

Water 220-2202-0120 4" SOLID SLEEVE A 61

Water 220-2202-0140 4" X 13" ANCHOR COUPLING FULL BODY A 62

Water 220-2202-0160 6" BEND 11-1/4 CI A 63

Water 220-2202-0180 6" BEND 22-1/2 A 64

Water 220-2202-0200 6" BEND 45 CI A 65

Water 220-2202-0220 6" BEND 90 CI A 66

Water 220-2202-0240 6" GATE VALVE MJ DI LESS/ACC D 67

Water 220-2202-0260 6" MEGA LUG RETAINER GLAN PIPE DI A 68

Water 220-2202-0280 6" TAPPING VALVE D 69

Water 220-2202-0300 6" X 12" GRADELOCK FIRE HYDRANT A 70

Water 220-2202-0320 6" X 12-1/2" SOLID SLEEVE MJ A 71

Water 220-2202-0340 6" X 13" ANCHOR COUPLING COMPACT A 72

Water 220-2202-0360 6" X 24" ANCHOR COUPLING COMPACT A 73

Water 220-2202-0380 6" X 24" GRADELOCK FIRE HYDRANT A 74

Water 220-2202-0400 6" X 6" GRADELOCK FIRE HYDRANT A 75

Water 220-2202-0420 6" X 6" X 6" TEE ANCHOR MJ LESS/ACC DOMES A 76

Water 220-2202-0440 6" X 6" X 6" TEE MJ A 77

Water 220-2202-0460 6" X 7-1/2" SOLID SLEEVE CI A 78

Water 220-2202-0480 8" BEND 22-1/2 CI A 79

Water 220-2202-0500 8" ANCHOR COUPLING SPLIT RING A 80

Water 220-2202-0520 8" BEND 11-1/4 MJ A 81

Water 220-2202-0540 8" BEND 45 MJ CI A 82

Water 220-2202-0560 8" BEND 90 MJ LESS/ACC A 83

Water 220-2202-0580 8" GATE VALVE MJ DI LESS/ACC D 84

Water 220-2202-0600 8" MEGA LUG RETAINER GLAN PIPE DI A 85

Water 220-2202-0620 8" TAPPING VALVE D 86

Water 220-2202-0640 8" X 12" SOLID SLEEVE CI A 87

Water 220-2202-0660 8" X 13" ANCHOR COUPLING COMPACT A 88

Water 220-2202-0680 8" X 7-1/2" SOLID SLEEVE A 89

Water 220-2202-0700 8" X 8" X 6" TEE ANCHOR MJ A 90

Water 220-2202-0720 8" X 8" X 6" TEE MJ A 91

Water 220-2202-0740 8" X 8" X 8" TEE MJ A 92

Water 220-2202-0760 10" BEND 45 CI A 93

Water 220-2202-0780 10" GATE VALVE MJ LESS/ACC D 94

Water 220-2202-0800 10" X 12" SOLID SLEEVE CI A 95

Water 220-2202-0820 10" X 2" CAP MJ A 96

Water 220-2202-0840 10" X 2" PLUG MJ A 97

Water 220-2202-0860 12" BEND 11-1/4 MJ A 98

Water 220-2202-0880 12" BEND 22-1/2 MJ A 99

Water 220-2202-0900 12" BEND 45 MJ A 100

Water 220-2202-0920 12" BEND 90 MJ A 101

Water 220-2202-0940 12" FIRE HYDRANT EXTENSION D 102

Water 220-2202-0960 12" GATE VALVE MJ LESS/ACC D 103

Water 220-2202-0980 12" MEGA LUG RETAINER GLAN PIPE DI A 104

Water 220-2202-1000 12" SOLID SLEEVE SHORT MJ CI A 105

Water 220-2202-1020 12" X 12" SOLID SLEEVE CI A 106

Bid # 23-44 Page 14 of 40 Firm Name:____________________________ Initials:________

Water 220-2202-1040 12" X 12" X 12" TEE MJ LESS/ACC A 107

Water 220-2202-1060 12" X 12" X 6" TEE ANCHOR MJ A 108

Water 220-2202-1080 12" X 12" X 8" TEE MJ LESS/ACC A 109

Water 220-2202-1100 12" X 2" CAP PLUG MJ A 110

Water 220-2202-1120 12" X 6" TEE MJ A 111

Water 220-2202-1140 14" MEGA LUG PVC C905 A 112

Water 220-2202-1160 14" X 7-1/2" SOLID SLEEVE C150 FOR DI A 113

Water 220-2202-1180 16" VALVE BOX TOP A 114

Water 220-2202-1200 18" X 24" VALVE BOX W/ LID A 115

Water 220-2202-1220 24" X 36" VALVE BOX W/ LID A 116

Water 220-2202-1240 36" X 48" VALVE BOX W/ LID A 117

Water 220-2202-1260 36" X 60" VALVE BOX W/ LID A 118

Water 220-2202-1280 METER BOX LARGE CONCRETE W/ READER LID A 119

Water 220-2202-1300 METER BOX LARGE PVC D1500 W/ METER LID A 120

Water 220-2202-1320

METER BOX LID SMALL PVC FITS D1200 BOX W/ READER

LID OVE

A 121

Water 220-2202-1340 METER BOX SMALL PVC D1200 W/ METER READER LID A 122

Water 220-2202-1360 4" BOLT AND GASKET MJ LESS GLAND A 123

Water 220-2202-1380 4" GLAN PAC MJ transition A 124

Water 220-2202-1400 4" GLAN PAC MJ A 125

Water 220-2202-1420 4" MEGA LUG RETAINER GLAN PIPE C909 A 126

Water 220-2202-1440 6" BOLT AND GASKET MJ LESS GLAND A 127

Water 220-2202-1460 6" GLAN PAC A 128

Water 220-2202-1480 6" MEGA LUG PIPE C909 A 129

Water 220-2202-1500 8" BOLT AND GASKET MJ LESS GLAND A 130

Water 220-2202-1520 8" GLAN PAC A 131

Water 220-2202-1540 8" MEGA LUG PIPE C900 A 132

Water 220-2202-1560 10" GLAN PAC A 133

Water 220-2202-1580 10" MJ BOLT AND GASKET PK LESS GLAND A 134

Water 220-2202-1600 12" GLAN PAC A 135

Water 220-2202-1620 12" MJ BOLT AND GASKET PK LESS GLAND A 136

Water 220-2202-1640 12"MEGA LUG PVC C900 A 137

Water 220-2202-1660 14" GLAN PAC MJ & DI C150 A 138

Water 220-2202-1680 1/2" FLEXIBLE COUPLING A 139

Water 220-2202-1700 3/4" AIR RELEASE A 140

Water 220-2202-1720 3/4" STEEL COUPLING PIPE OD 1.05 LENGTH 4-1/2 TO 5 A 141

Water 220-2202-1740 3/4" X 4" T-HEAD BOLT A 142

Water 220-2202-1760 1" STEEL COUPLING PIPE OD 1.32 LENGTH 4-1/2 TO 5 A 143

Water 220-2202-1780 1-1/2" STEEL COUPLING PIPE OD 1.90 LENGTH 5 A 144

Water 220-2202-1800 2" AIR RELEASE D 145

Water 220-2202-1820 2" STEEL COUPLING PIPE OD 2.38 LENGTH 5 A 146

Water 220-2202-1840 4" HYMAX COUPLING D 147

Water 220-2202-1860 6" GASKET FLANGE A 148

Water 220-2202-1880 6" GASKET TAPPING A 149

Water 220-2202-1900 6" HYMAX COUPLING A 150

Water 220-2202-1920 6" TAPPING SLEEVE OD 6.60 - 7.00 D 151

Water 220-2202-1940 6" X 15" CLAMP OD 7.05 - 7.46 D 152

Bid # 23-44 Page 15 of 40 Firm Name:____________________________ Initials:________

Water 220-2202-1960 6" X 7-1/2 " CLAMP DOUBLE BAND OD 7.05 - 7.46 D 153

Water 220-2202-1980 8" GASKET FLANGE A 154

Water 220-2202-2000 8" GASKET TAPPING A 155

Water 220-2202-2020 8" HYMAX COUPLING D 156

Water 220-2202-2040 8" X 7-1/2 " CLAMP-DOUBLE BAND OD 8.62 - 9.42 D 157

Water 220-2202-2060 8" X 7-1/2" CLAMP-DOUBLE BAND OD 8.99 - 9.79 D 158

Water 220-2202-2080 10" X 10" CLAM -DOUBLE BAND OD 10.75 - 11.55 D 159

Water 220-2202-2100 10" X 10" CLAMP DOUBLE BAND OD 11.6 - 12.40 D 160

Water 220-2202-2120 10" X 10" CLAMP 0D 11.04 - 12.24 D 161

Water 220-2202-2140 10" X 10" CLAMP DOUBLE BAND AC ONLY D 162

Water 220-2202-2160 10" X 15" CLAMP DOUBLE BAND OD 10.75 - 11.55 D 163

Water 220-2202-2180 10" X 15" CLAMP DOUBLE BAND OD 11.60 - 12.40 D 164

Water 220-2202-2200 12" X 15" CLAMP DOUBLE BAND OD 12.75 - 13.55 D 165

Water 220-2202-2220 12" GASKET FLANGE A 166

Water 220-2202-2240 12" HYMAX COUPLING D 167

Water 220-2202-2260 12" X 10" CLAMP OD 13.14 - 14.34 D 168

Water 220-2202-2280 12" X 10" CLAMP OD 13.65 - 14.85 D 169

Water 220-2202-2300 12" X 10" CLAMP-DOUBLE BAND OD 12.75 - 13.55 D 170

Water 220-2202-2320 12" X 15" CLAMP DOUBLE BAND OD 13.14 - 14.34 D 171

Water 220-2202-2340 12" X 15" CLAMP OD 13.65 - 14.45 D 172

Water 220-2202-2360 14" CLAMP BELL JOINT REPAIR DI C150 D 173

Water 220-2202-2380 14" x 15" CLAMP OD 15.07 - 15.82 D 174

Water 220-2202-2400 32 OZ CEMENT PVC HEAVY DUTY FAST SET A 175

Water 220-2202-2420 32 OZ PRIMER PURPLE CAN A 176

Water 220-2202-2440 FIRE HYDRANT WRENCH ADJUST A 177

Water 220-2202-2460 GAUGE 0-300 LBS LIQ FILLED #UG-GF TEXAS GAUGE A 178

Water 220-2202-2480 GLUE JM BLUE OR HOT A 179

Water 220-2202-2500 LUBRICANT PIPE A 180

Water 220-2202-2520 PROBE ROD TIPS A 181

Water 220-2202-2540 RECTOR SEAL TEFLON A 182

Water 220-2202-2620 1/2" X 3" CLAMP A 183

Water 220-2202-2640 1/2" X 6" CLAMP A 184

Water 220-2202-2660 3/4" X 3" CLAMP A 185

Water 220-2202-2680 3/4" X 6" CLAMP A 186

Water 220-2202-2700 3/4" X 7" CLAMP OD 3.73 - 4.00 A 187

Water 220-2202-2720 1" X 3" CLAMP A 188

Water 220-2202-2740 1" X 6" CLAMP A 189

Water 220-2202-2760 1-1/2" X 6" CLAMP A 190

Water 220-2202-2780 1-1/2" X 3" CLAMP A 191

Water 220-2202-2800 2" X 3" CLAMP D 192

Water 220-2202-2820 2" X 6" CLAMP D 193

Water 220-2202-2840 2" X 7-1/2" CLAMP OD 2.35 - 2.63 D 194

Water 220-2202-2860 2" X 7-1/2" CLAMP OD 2.35 - 2.63 COLLAR LEAK D 195

Water 220-2202-2880 2" X 3/4" TAP SADDLE DB 196

Water 220-2202-2900 2" X 1" TAP SADDLE DB 197

Water 220-2202-2920 3" X 3" CLAMP D 198

Bid # 23-44 Page 16 of 40 Firm Name:____________________________ Initials:________

Water 220-2202-2940 3" X 6" CLAMP D 199

Water 220-2202-2960 3" X 7" CLAMP SCH 40 D 200

Water 220-2202-2980 3" X 7-1/2" CLAMP OD 3.46 - 3.70 D 201

Water 220-2202-3000 3" X 7-1/2" CLAMP OD 3.49 - 4.29 D 202

Water 220-2202-3020 3" X 7-1/2" CLAMP OD 3.96 - 4.25 D 203

Water 220-2202-3040 3" X 15" CLAMP OD 3.49 - 4.29 D 204

Water 220-2202-3060 3" X 3/4" TAP SADDLE DB 205

Water 220-2202-3080 3" X 1" TAP SADDLE DB 206

Water 220-2202-3100 4" X 7" CLAMP COLLAR D 207

Water 220-2202-3120 4" X 7-1/2" CLAMP OD 4.74 - 5.57 D 208

Water 220-2202-3140 4" X 7-1/2" CLAMP OD 4.44 - 5.24 D 209

Water 220-2202-3160 4" X 7-1/2" CLAMP OD 4.45 - 4.73 D 210

Water 220-2202-3180 4" X 15" CLAMP OD 4.44 - 5.24 D 211

Water 220-2202-3200 4" X 15" CLAMP OD 4.74 - 5.57 D 212

Water 220-2202-3220 4" X 3/4" TAP SADDLE DB 213

Water 220-2202-3240 4" X 1" TAP SADDLE DB 214

Water 220-2202-3260 6" X 7-1/2" CLAMP OD 6.84 - 7.64 D 215

Water 220-2202-3280 6" X 7-1/2" CLAMP OD 7.45 - 7.85 D 216

Water 220-2202-3300 6" X 7-1/2"CLAMP OD 6.62 - 7.42 D 217

Water 220-2202-3320 6" X 12" CLAMP OD 7.40 - 7.85 D 218

Water 220-2202-3340 6" X 15" CLAMP OD 6.62 - 7.42 D 219

Water 220-2202-3360 6" X 15" CLAMP OD 6.84 - 7.64 D 220

Water 220-2202-3380 6" X 15" CLAMP OD 7.45 - 7.85 D 221

Water 220-2202-3400 6" X 3/4" TAP SADDLE DB 222

Water 220-2202-3420 6" X 1" TAP SADDLE DB 223

Water 220-2202-3440 6" X 2" TAP SADDLE DB 224

Water 220-2202-3460 8" X 15" CLAMP OD 8.62 - 9.42 D 225

Water 220-2202-3480 8" X 15" CLAMP OD 8.99 - 9.79 D 226

Water 220-2202-3500 8" X 3/4" TAP SADDLE DB 227

Water 220-2202-3520 8" X 1" TAP SADDLE DB 228

Water 220-2202-3540 8" X 2" TAP SADDLE DB 229

Water 220-2202-3560 10" X 1" TAP SADDLE DB 230

Water 220-2202-3580 12" X 3/4" TAP SADDLE DB 231

Water 220-2202-3600 12" X 1" TAP SADDLE DB 232

Water 220-2202-3620 12" X 2" TAP SADDLE DB 233

Water 220-2202-3640 1-1/2" ADAPTOR MALE SCH 40 A 234

Water 220-2202-3660 1-1/2" BEND 45 SCH 40 A 235

Water 220-2202-3680 1-1/2" COUPLING SCH 40 A 236

Water 220-2202-3700 1-1/2" ELBOW 90 SCH 40 A 237

Water 220-2202-3720 1-1/2" ADAPTOR FEMALE SCH 40 A 238

Water 220-2202-3740 1-1/2" TEE SCH 40 A 239

Water 220-2202-3760 2" GATE VALVE BRASS FEM X FEM DB 240

Water 220-2202-3780 2" VALVE BOX RISER A 241

Water 220-2202-3800 1/2" METER COUPLING BRASS DB 242

Water 220-2202-3820 1/2" X 7" METER RISER DB 243

Water 220-2202-3840

3/4" BALL CURB STOP PAD WING W/ 3/4 FLARE COPPER X

3/4 F

DB 244

Bid # 23-44 Page 17 of 40 Firm Name:____________________________ Initials:________

Water 220-2202-3860 3/4" BEND 45 PVC A 245

Water 220-2202-3880 3/4" CORPORATION DB 246

Water 220-2202-3900 3/4" COUPLING BRASS DB 247

Water 220-2202-3920 3/4" CURB STOP COPPER TO IRON DB 248

Water 220-2202-3940 3/4" CURB STOP IRON TO IRON DB 249

Water 220-2202-3960 3/4" ELL 90 PVC A 250

Water 220-2202-3980 3/4" ADAPTOR FEMALE SCH 80 PVC FPT X SLIP A 251

Water 220-2202-4000 3/4" GASKET WATER METER A 252

Water 220-2202-4020 3/4" ADAPTOR MALE SCH 40 PVC MPT X SLIP A 253

Water 220-2202-4040 3/4" SLIP COUPLING SCH 40 PVC A 254

Water 220-2202-4060 3/4" TEE BRASS DB 255

Water 220-2202-4080 3/4" TEE PVC A 256

Water 220-2202-4100 3/4" X 1/2" BUSHING BRASS DB 257

Water 220-2202-4120 3/4" X 4" NIPPLE BRASS DB 258

Water 220-2202-4140 3/4" X 6" NIPPLE BRASS DB 259

Water 220-2202-4160 3/4" ADAPTERS BRASS C84-33 3/4 COMP X 3/4 MIPT DB 260

Water 220-2202-4180 3/4" ANGLE STOP COMPRESSION DB 261

Water 220-2202-4200 3/4" COMPRESSION BEND BRASS 90 DB 262

Water 220-2202-4220 3/4" COMPRESSION COUPLING BRASS DB 263

Water 220-2202-4240 3/4" COMPRESSION COUPLING BRASS FEMALE DB 264

Water 220-2202-4260 3/4" ELL BRASS 90 FIP DB 265

Water 220-2202-4280 3/4" METER COUPLING STRAIGHT BRASS DB 266

Water 220-2202-4300 3/4" X 7" METER RESETTER DB 267

Water 220-2202-4320 3/4" X 9" METER RESETTER DB 268

Water 220-2202-4340 3/4" X 12" METER RISER DB 269

Water 220-2202-4360 3/4" X 15" METER RISER DB 270

Water 220-2202-4380 1" BEND 45 PVC A 271

Water 220-2202-4400 1" CORPORATION DB 272

Water 220-2202-4420 1" COUPLING SCH 40 PVC A 273

Water 220-2202-4440 1" CURB STOP COPPER TO IRON DB 274

Water 220-2202-4460 1" CURB STOP IRON TO IRON DB 275

Water 220-2202-4480 1" ELL 90 PVC A 276

Water 220-2202-4500 1" ADAPTOR FEMALE SCH 80 PVC A 277

Water 220-2202-4520 1" ADAPTOR MALE PVC A 278

Water 220-2202-4540 1" TEE PVC A 279

Water 220-2202-4560 1" X 3/4" BUSHING TAPPER CC THREAD DB 280

Water 220-2202-4580 1" ADAPTOR BRASS MPT X COMP DB 281

Water 220-2202-4600 1" ADAPTOR FPT X COMP DB 282

Water 220-2202-4620 1" ANGLE STOP COMPRESSION DB 283

Water 220-2202-4640 1" COMPRESSION BEND BRASS 90 DB 284

Water 220-2202-4660 1" COMPRESSION COUPLING BRASS DB 285

Water 220-2202-4680 1" COUPLING BRASS FIP DB 286

Water 220-2202-4700 1" ELL BRASS 90 DB 287

Water 220-2202-4720 1" METER COUPLING BRASS DB 288

Water 220-2202-4740 1" TEE BRASS DB 289

Water 220-2202-4760

1" U-BRANCH PIECE CTS PJ X TWO 3/4 MIP OUTLETS X 7-

1/2 S

DB 290

Bid # 23-44 Page 18 of 40 Firm Name:____________________________ Initials:________

Water 220-2202-4780 1" X 10" METER RISER DB 291

Water 220-2202-4800 1" X 12" METER RISER DB 292

Water 220-2202-4820 1" X 3/4" BUSHING BRASS DB 293

Water 220-2202-4840 1" X 4" NIPPLE BRASS DB 294

Water 220-2202-4860 1-1/2 " x 6" NIPPLE BRASS DB 295

Water 220-2202-4880 1-1/2" BALL VALVE DB 296

Water 220-2202-4900 1-1/2" GASKET METER DROP IN DB 297

Water 220-2202-4920 1-1/2" GATE VALVE DB 298

Water 220-2202-4940 1-1/2" METER FLANGE DB 299

Water 220-2202-4960 1-1/2" X 1" BUSHING BRASS DB 300

Water 220-2202-4980 1-1/2" X 4" NIPPLE BRASS DB 301

Water…