ESBD_574944_1794244662793_2026.11.09 - LU New Residence Hall DB 27-05037 - Bid Specification 1st Phase Design Criteria Package (Attachment B).pdf

PDF 526 KB Posted

Attached to
RFQ for Design-Build Services - New Residence Hall at Lamar University in Beaumont, Texas
Solicitation number
758-27-05037
Issued by
Johnson County, Beaumont City, Texas

About this file

This is a Design Criteria Package for a Design-Build delivery method project involving Lamar University, part of The Texas State University System, located in Beaumont, Texas. The project involves the design and construction of one new residence hall providing approximately 1,000 student beds, with planning based primarily on traditional two-person rooms served by communal bathrooms and shared common areas, though semi-suite and four-person units may be considered during programming. The work scope includes the building structure, site development, utilities, landscape, pedestrian improvements, technology infrastructure, security, life-safety systems, furnishings coordination, and all related design and construction services. The project utilizes a construction cost limitation of $105,000,000 with a target substantial completion date of June 1, 2029. The Design-Build Contractor shall provide complete integrated services including architecture, interior design, programming validation, structural and civil engineering, MEP design, site design with drainage study, AV/IT/telecommunications/security systems, cost estimating, value management, scheduling, BIM coordination, and furniture coordination with the Owner's commissioning and testing providers.

The project is governed by the 2024 ICC family of codes, 2018 International Energy Conservation Code, 2026 National Electrical Code (effective September 1, 2026), 2012 Texas Accessibility Standards, 2021 NFPA standards, SECO Water Conservation Design Standards, and Texas Department of Insurance windstorm requirements. Wood-framed construction is prohibited; the Design-Build Contractor must evaluate and recommend appropriate structural systems. The Owner will furnish site survey information, geotechnical studies, commissioning services, and construction materials testing, while furniture will be Owner-furnished and Owner-installed with coordination by the Design-Build Contractor. The Design-Build Contractor must retain a Registered Accessibility Specialist for TAS compliance review and obtain SECO certification. The project schedule and procurement details are referenced in Section 2.5 of the associated RFQ, and the contractor shall validate logic, early packages, long-lead procurement, and move-in readiness.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Lamar University New Residence Hall | Design Criteria | November 9, 2026

DESIGN CRITERIA PACKAGE

Lamar University

New Residence Hall

Beaumont, Texas

November 9, 2026

Owner Lamar University / The Texas State University System

Delivery Method Design-Build

Construction Cost Limitation $105,000,000

Target Substantial Completion June 1, 2029

ATTACHMENT B

1. Project Overview New Residence Hall

Lamar University intends to deliver one residence hall on a single campus site, providing 1,000 student beds. The housing program is intended to consist primarily of traditional two-person rooms served by communal bathrooms and shared common areas, although smaller percentages of semi-suite and four-person units may be considered during programming. The work is anticipated to include the building, site development, utilities, landscape, pedestrian improvements, technology, security, life-safety systems, furnishings coordination, and all related design and construction services.

• Approximately 1,000 total student beds, subject to final programming.

• Planning assumes one residence hall with all beds in traditional two-person rooms served by communal bathrooms and shared common areas. Additional unit types more closely aligned with Lamar University’s existing housing portfolio may be considered if the budget allows.

• No live-in faculty apartments are currently envisioned. Staff and resident-advisor accommodations shall be confirmed during programming.

2. Delivery Method and Design-Build Contractor Scope The Project will use a Design-Build delivery method. The Design-Build Contractor shall provide complete, integrated services necessary to design, construct, and close out the Project. Services shall generally include:

• Architecture, interior design, programming validation, and code analysis.

• Structural, civil, MEP, fire protection, building envelope, landscape, irrigation, and site design, including a drainage study.

• AV, IT, telecommunications, security, access control, mass notification, signage, and wayfinding.

• Review and validate Owner-furnished survey and geotechnical information; provide additional field verification, subsurface utility investigation, construction layout, SWPPP, and environmental compliance required to complete the Work.

• Cost estimating, value management, scheduling, constructability, BIM coordination, and phased/early-package planning.

• Furniture coordination and integration of Owner-furnished, Owner-installed furniture with the building design, utilities, access requirements, installation sequencing, and project schedule.

• Coordinate with the Owner’s commissioning, TAB, CMT, and building envelope testing providers.

3. Program Criteria The below programs remain the quantitative starting point for amenity, study, support, and gross-area planning. The

Design-Build Contractor shall validate total area, plumbing counts, efficiency, bed yield, and final programming.

Facility Planning Beds Current Program GSF

New Residence Hall Approx. 1,000 240,000 GSF

3.1 Residential Units

• The program assumes traditional double unit types.

• Accessible units shall be integrated throughout available unit types and dispersed in accordance with applicable accessibility requirements.

• Room layouts shall provide durable finishes, adequate storage, study surfaces, data/power, acoustical privacy, and maintainable MEP access.

3.2 Common, Academic, and Support Spaces

• Resident-only card-access lobby, front desk/workstation, secure key room, and building administration/support.

Campus mail and package services are centrally located on campus and are not included in the building program.

• Community lounges, shared social/living/kitchen space, game/recreation rooms, vending, laundry, and informal gathering areas.

• Individual and group study rooms, flexible nooks/alcoves, and technology-supported collaborative spaces.

• Micro-markets may be considered for inclusion in the final program, subject to Owner approval.

• Public and single-occupant restrooms, janitor closets, trash collection, mechanical/electrical rooms, IDF rooms, fire alarm room, storage, and service access.

4. Site and Planning Criteria

• Validate the site organization, building configuration, setbacks, circulation, open-space relationships, and amenity locations during programming and design.

• Provide safe pedestrian connections, accessible routes, service access, emergency access, bicycle storage, site lighting, landscape, and drainage. Site parking is expected to include only short-term drop-off parking and ADA-accessible parking as needed.

• No parking study is anticipated as part of the Project. A drainage study should be anticipated and coordinated with the site and civil design.

4.1 Site Identification

5. Architectural and Building-System Criteria

5.1 Architectural Character and Envelope

• Exterior design shall be compatible with the Lamar University campus context. Current planning assumes a combination of brick and precast stone panels, subject to Owner approval.

• Assume low-slope/flat roof systems with positive drainage, safe maintenance access, and durable, warranted assemblies.

• Use robust, institutional-grade materials suitable for continuous student-housing occupancy and coastal Southeast

Texas exposure.

• Building envelope assemblies shall comply with all applicable code, energy code, windstorm, and weather-resistance requirements.

5.2 Structural

• Wood-framed construction will not be permitted. The Design-Build Contractor shall evaluate and recommend the structural system based on design requirements, code compliance, durability, acoustical performance, constructability, schedule, and budget.

• Foundation design shall be based on Owner-furnished geotechnical studies, supplemented by additional investigation if identified by the Design-Build Contractor as necessary.

• Design for applicable coastal windstorm requirements and obtain required certifications.

5.3 Mechanical, Plumbing, and Controls

• Provide independent temperature control, appropriate ventilation and dehumidification, maintainable equipment access, and controls integrated with the campus BAS requirements.

• Assume the new building will be serviced by a standalone chiller system.

• Provide complete domestic water, sanitary, storm, and natural gas systems.

5.4 Electrical, Life Safety, and Technology

• The Design-Build Contractor shall determine the number, type, capacity, and arrangement of elevators required to satisfy code, accessibility, operational, traffic, schedule, and budget requirements.

• Evaluate emergency power and generator requirements. Provide complete normal power, lighting, lightning protection, grounding, metering, and power-quality systems.

• Provide fire alarm, sprinkler, emergency communications, and other life-safety systems required by applicable codes.

• Coordinate and integrate the campus-wide Alertus mass notification/intercom system in accordance with Owner and vendor requirements.

• Provide telecommunications rooms, structured cabling pathways, wireless coverage, access control, video surveillance, intrusion interfaces, and other campus-standard technology.

5.5 Owner-Furnished Information, Services, and Items

• The Owner will furnish available site survey information and project-specific geotechnical studies.

• The Owner will provide commissioning, testing and balancing of HVAC systems, construction materials testing and building-envelope construction inspections and testing.

• Furniture will be Owner-furnished and Owner-installed (OFOI). The Design-Build Contractor shall coordinate layouts, dimensions, utilities, clearances, access, installation sequencing, and schedule requirements for OFOI furniture.

6. Applicable Codes and Standards The Design-Build Contractor shall comply with the editions adopted by Lamar University and all other applicable federal, state, and local requirements in effect at the time of design and construction.

• 2024 ICC family, including the International Building Code, International Plumbing Code, International Mechanical

Code, and International Existing Building Code, as applicable.

• 2018 International Energy Conservation Code for SECO certification.

• Comply with Texas Government Code § 2166.403 – Alternative Energy Requirements and Economic Feasibility

Study.

• 2026 National Electrical Code, effective September 1, 2026.

• 2012 Texas Accessibility Standards (TAS).

• 2021 NFPA 101, Life Safety Code.

• 2021 NFPA 1, Fire Code.

• SECO Water Conservation Design Standards for State Buildings and Institutions of Higher Education Facilities.

• Comply with SECO’s Rainwater Harvesting Requirements & Economic Feasibility Study.

• Texas Department of Insurance windstorm requirements; WPI-1 applications shall be certified in accordance with the

2024 IBC.

• Applicable TDLR requirements, including accessibility and elevator review/inspection.

Accessibility review: The Design-Build Contractor shall retain and coordinate with a Registered Accessibility Specialist, submit documents for TAS review, resolve comments, and support final inspection and project closeout.

SECO certification: Required for new construction and qualifying major renovation. The Design-Build Contractor shall prepare the required analysis, documentation, and certifications.

7. Budget Construction Cost Limitation = $105,000,000

8. Procurement and Project Schedule Refer to the project planning schedule in Section 2.5 of the RFQ. The Design-Build Contractor shall validate logic, early packages, long-lead procurement, commissioning, furniture/technology installation, and move-in readiness.

File details come from the government source that posted it. Updated .