ESBD_518885_1779311245676_02. Specification.pdf

SmartSensor Matrix

16–beam stop bar sensor The SmartSensor Matrix is a first-of-its-kind stop bar presence detector designed for use at signalized intersections to detect vehicles with the reliability of radar and with all the advantages of non-intrusive detection.

Matrix of 16 radars for two-dimen-sional coverage

Tracks vehicles through a 90 de-gree field of view that extends out

140 ft. (42.7 m)

Includes Radar Vision technology to detect and track in two dimensions

Reports real-time presence of both moving and stopped vehicles

Standard detector-rack contact-closure interface

Easy to install and operate

Supports curved and angled lanes

Compatible with Click 65x all-in-one cabinet interface device

Automated manufacturing process

Patented auto-configuration process

Patented Digital Wave Radar II technology

Remote accessible for traSc moni-toring and sensor management

Flash upgradable

Robust to changing temperature, light and weather conditions

1827 W 650 N, Springville, UT 84663, US # (801) 734-7200 # www.wavetronix.comWX-500-0071

Part No: SS-225

WX-500-0071

Part No: SS-225

Physical properties

Weight: 4.2 lbs. (1.9 kg)

Dimensions: 13.2 in. × 10.6 in. × 3.3 in. (33.5 cm × 26.9 cm × 8.4 cm)

Enclosure:

Lexan EXL polycarbonate

Resistant to corrosion, fungus, moisture deterioration, and ultraviolet rays

Outdoor weatherable: UL 746C

Withstands 5-ft. (1.5-m) drop

Watertight by NEMA 250 standard

Connector: MIL-C-26482

Rotational backplate for 360º of roll

Radar design

Type of radar: 16-beam

Uses frequency modulated continuous wave (FMCW) radar

Operating frequency: 24.0–24.25 GHz (K-band)

Transmit bandwidth: 245 MHz

Bandwidth stable within 1%

Un-windowed resolution: 2 ft. (0.6 m)

Antennas:

Printed circuit board antennas

Vertical 6 dB beam width (two-way pattern): 65°

Horizontal field of view: 90º

Two-way sidelobes: -40 dB

RF channels: 8

No manual tuning to circuitry

No temperature-based compensation necessary

Diagnostics mode for verifying system functionality

Algorithms mitigate detections from wrong way or cross trafc

Detection area

Detection range: 6 to 140 ft. (1.8 to 42.7 m)

Field of view: 90º

Number of lanes: Up to 10

Flexible lane configuration support including:

Curved lanes

Islands

Medians

Measured quantities

Real-time presence data across a 140-ft. (42.7-m) range

Maximum number of channels: 16

Maximum number of zones: 16

Power

Power consumption: 9 W *

Operating voltage: 10–28 VDC *

Recommended power supply voltage: 12–24 VDC

Onboard surge protection

Ordering information

SmartSensor Matrix

SS-225

Optional accessories (sold separately)

102-0597 – Arc2

102-0594 – Arc6

102-0525 – SmartSensor Surge

102-0416/102-0451 – Click 650/656 cabinet inter-face device

CLK-112/114 – Click 112/114 rack cards

SS-704-xxx/705 – SmartSensor 6-conductor Cable

SS-611 – SmartSensor Mount

101-0462 – Span Wire Mount

SS-B01-0003/0005/0008 – Intersection Preassem-bled Backplate – AC

SS-B01-0004/0006 – Intersection Preassembled

Backplate – DC

SS-B02-0002/0003 – Intersection Preassembled

19-inch Rack

SS-710 – Sensor Cable Junction Box

Contact us

801.734.7200 sales@wavetronix.com www.wavetronix.com

SmartSensor Matrix technical specifications

* While the system works with supply voltages of up to 28 VDC, 24 VDC supplies are recommended; the excess is designed to allow some tolerance on the out-put of the supply. To support 12 VDC battery systems, and if the cable is short enough, the sensor can accept a power supply as low as 10 VDC; however, this is dependent on cable length and wire gauge. Please consult Knowledge Base Article 0309, SmartSensor Matrix Cable Length Recommendations, for details.

Part No: SS-225

Communication

Com ports:

Two half-duplex RS-485 COM

User configurable:

Response delay

Push port

Firmware upgradability over any COM port

Fail-safe mode for contact closure outputs if communication is lost

Dedicated detection communications

Configuration, verification, or trafc display without disrupting detection communications

Configuration

Graphical user interface with trafc pattern display

Auto-configuration of lanes, stop bars, and zones

Manual configuration supported

Four-sided zones of any shape and size

Overlapping zones supported

Lane boundary increment: 1 ft. (0.3 m)

Sensor reconfiguration without detection disruption supported

Channels supported:

Normal

Counting

Pulse

Supported operating systems:

Windows 7

Windows 8

Windows 10

Software-supported functionality:

TCP/IP connectivity

Sensor configuration backup and restore

Virtual sensor connections for demonstration and training

Real-time trafc visualization for performance verification and trafc display

Backed-up sensor configurations can be viewed and edited

Zone and channel actuation display

Local or remote sensor firmware upgradability

User-selectable zone to channel mapping

Self-test for verifying hardware functionality

AND logic triggers the channel when all the selected zones are active

OR logic used to combine multiple zones to a channel output

Channel output extend and delay functionality

Manufacturing

Manufactured in the USA

Surface mount and wave solder assembly

Operational testing:

Sub-assembly test

48-hour unit level burn-in

Final unit test

Unit test results available

IPC-A-610C Class 2–compliant

Testing

NEMA:

NEMA TS 2-2003

FCC:

47 CFR Part 15, Section 15.245

FCC regulation-compliant for life of the sensor

FCC certification on product label

CE:

Safety (IEC 60950-1:2006)

Radiated RF Emissions (EN 300 440-2 v1.4.1 (2010-08))

Declaration of Conformity (BS EN ISO/IEC 17050-1:2004)

Conducted and Low Frequency Emissions and Immunity

(ETSI EN 301 489-3)

Testing documentation available upon request

Operating conditions

Ambient operating temperature: -29.2°F to 165°F (-34°C to 74°C)

Humidity: Up to 95% RH (non-condensing)

Accurate performance in:

Rain up to 1 in. (2.5 cm) per hour

Freezing rain

Dry and moist snowfall

Wind

Dust

Fog

Changing temperature

Changing lighting (even direct light on sensor at dawn and dusk)

Ice and dry snow buildup up to 0.2 in. (0.5 cm) on sensor front

Maintenance

No cleaning or adjustment necessary

No battery replacement necessary

No recalibration necessary

Mean time between failures: 10 years (estimated based on manufacturing techniques)

Support

Training and tech support available

Training includes:

Knowledgeable trainers

Presentation materials

Classroom and in-field instruction

Installation and configuration instruction to ensure accurate performance

Instruction in use of computer and other necessary equipment

Part No: SS-225

Virtual configuration

Technical support includes:

Technical representatives available for installation and configuration

Ongoing troubleshooting and maintenance support

Documentation:

Comprehensive installation guide

Configuration guide

Quick start guide

Warranty

Two-year warranty against material and workmanship defects

(see SmartSensor Warranty datasheet for complete details)

The advertised detection accuracy of the company’s sensors is based on both external and internal testing, as outlined in each product’s specification document. Although our sensors are very accurate by industry standards, like all other sensor manufacturers we cannot guarantee perfection or assure that no errors will ever occur in any particular applications of our technology. Therefore, beyond the express Limited Warranty that accompanies each sensor sold by the company, we oQer no additional representations, warranties, guarantees or remedies to our customers. It is recommended that purchasers and integrators evaluate the accuracy of each sensor to determine the acceptable margin of error for each application within their particular system(s).

SmartSensor Advance

Forward–fire intersection sensor The Wavetronix SmartSensor Advance bridges the gap between safety and e:ciency with one-of-a-kind SafeArrival technology. SafeArrival allows for e?ective dilemma-zone protection based upon dynamic ETA tracking of vehicles as they approach the stop-bar.

Advance detection at signalized intersections

Patented Digital Wave Radar

Dynamic ETA Tracking over the entire detection area

Easy integration with the Smart-

Sensor Matrix into the same backplate or Click 65x cabinet interface device

Latched channel functionality for queue length detection

Cost savings due to 600-ft. range of detection

Auto-configuration software for PC

Consistent all-weather, all-condi-tion performance

Breakthrough SafeArrival technol-ogy for safe and e:cient dilemma zone protection

Easy integration with Wavetronix

Click products

Non-intrusive, aboveground posi-tion makes sensor easy to install

Low-maintenance design

1827 W 650 N, Springville, UT 84663, US $ (801) 734-7200 $ www.wavetronix.comWX-500-0070

Part No: SS-200V

WX-500-0070

Part No: SS-200V

Physical properties

Weight: 3.8 lbs. (1.7 kg)

Dimensions: 13.2 in. × 10.6 in. × 3.8 in. (33.5 cm × 26.9 cm × 9.7 cm)

Enclosure:

Lexan EXL polycarbonate

Resistant to corrosion, fungus, moisture deterioration and ultraviolet rays

Outdoor weatherable: UL 746C

Withstands 5-ft. (1.5-m) drop

Watertight by NEMA 250 standard

Connector: MIL-C-26482

Rotational backplate for 360º of roll

Radar design

Type of radar: Single-beam

Uses frequency modulated continuous wave (FMCW) radar

Operating frequency: 10.5–10.55 GHz (X-band)

Transmit bandwidth: 45 MHz

Bandwidth stable within 1%

Un-windowed resolution: 11 ft. (3.4 m)

Antennas:

Printed circuit board antennas

Vertical 6 dB beam width (two-way pattern): 65°

Horizontal 6 dB beam width (two-way pattern): 10.5°

Two-way sidelobes -40 dB

RF channels: 8

No manual tuning to circuitry

No temperature-based compensation necessary

Detection area

Detection range: 50 to 600 ft. (15.2 m to 182.8 m)

Maximum mounting height: 40 ft. (12.2 m)

Maximum mounting distance from center of lanes: 50 ft. (15.2 m)

Measured quantities

Per-vehicle data:

Range

Speed

ETA

Number of channels: 8

Channel outputs: 8

Alerts per channel: 4 (32 total)

Zones per alert: 4 (128 total)

Number of simultaneous vehicle detections: 25

Dynamic density (a measure of instantaneous roadway egciency)

Power

Power consumption: 3.2 W @ 12 VDC

Ordering information

SmartSensor Advance

SS-200V

Retrofitted SmartSensor Advance

SS-200V-001

Optional accessories (sold separately)

102-0597 – Arc2

102-0594 – Arc6

102-0525 – SmartSensor Surge

102-0416/102-0451 – Click 650/656 cabinet inter-face device

CLK-112/114 – Click 112/114 rack cards

SS-704-xxx/705 – SmartSensor 6-conductor Cable

SS-708-xxx/707 – SmartSensor 8-conductor Cable

(for retrofitted sensor)

SS-611 – SmartSensor Mount

101-0462 – Span Wire Mount

SS-B01-0003/0005/0008 – Intersection Preassem-bled Backplate – AC

SS-B01-0004/0006 – Intersection Preassembled

Backplate – DC

SS-B02-0002/0003 – Intersection Preassembled

19-inch Rack

SS-710 – Sensor Cable Junction Box

Contact us

801.734.7200 sales@wavetronix.com www.wavetronix.com

SmartSensor Advance technical specifications

* While the system works with supply voltages of up to 28 VDC, 24 VDC supplies are recommended; the excess is designed to allow some tolerance on the output of the supply. To support 12 VDC battery systems, and if the cable is short enough, the sensor can accept a power supply as low as 10 VDC; however, this is dependent on cable length and wire gauge. Please consult the SmartSensor Advance Installation Guide, for details.

Part No: SS-200V

Operating voltage: 10–28 VDC *

Recommended power supply voltage: 12–24 VDC *

Onboard surge protection

Communication

Com ports:

Two half-duplex RS-485 COM

User configurable:

Baud rate

Response delay

Contact closure data output frequency

Supported baud rates:

19200

38400

57600

115200

Contact closure data output frequency:

Minimum: 10 ms

Default: 130 ms

Contact closure data latency (varies with baud rate and output frequency):

Minimum: 55 ms (this is achieved using 57600 bps baud rate and 50 ms output frequency)

Default: 142 ms (this is achieved using 9600 bps baud rate and 130 ms output frequency)

Firmware upgradability over any COM port

Dedicated detection communications

Configuration, verification, or tragc display without disrupting detection communications

Detection data available via serial communications

Configuration

Graphical user interface with tragc representation

Automatic and manual configuration of detection sensitivity in

5-ft. (1.5-m) increments

Manual configuration supported

Zone size increment: 5 ft. (1.5 m)

Maximum detection zone size: 550 ft. (167.6 m)

High speed and low speed detection filters:

Speed filter increment: 1 mph (1.6 kph)

Upper and lower ETA filters

ETA filter increment: 0.1 seconds

Upper and lower count filters

Count filter increment: 1

Display of configured alerts and their actuation

Vehicle track file logging

Supported operating systems:

Windows 7

Windows 8

Windows 10

Software supported functionality:

TCP/IP connectivity

Auto-find baud rate

Auto-find serial port

Virtual sensor connections

Sensor configuration backup and restore

Dynamic stop-bar ETA tracking adjusted as vehicles change speeds

Channel output from multiple alerts

Delay and extend settings used for channel outputs

Combinational logic applied to zone outputs for alert output

Logic filters for zone output

Latched channel output controlled by alerts and timer

Pulse channel outputs for intersection arrival-time information

Manufacturing

Manufactured in the USA

Surface mount and wave solder assembly

IPC-A-610C Class 2–compliant

Operational testing:

Sub-assembly test

48-hour unit level burn-in

Final unit test

Unit test results available

Testing

NEMA:

NEMA TS 2-2003

NEMA 250 type 4X-compliant

FCC:

CFR 47 Part 15

FCC regulation–compliant for life of the sensor

FCC certification on product label

CE:

Tested under IEC 61000-4-5 class 4 (lightning surge pro-tection)

Operating conditions

Ambient operating temp: -29.2°F to 165°F (-34°C to 74°C)

Humidity: up to 95% RH (non-condensing)

Accurate performance in:

Rain up to 2 in. (5.08 cm) per hour

Freezing rain

Dry and moist snowfall

Wind

Dust

Fog

Changing temperature

Changing lighting (even direct light on sensor at dawn and dusk)

Part No: SS-200V

Ice and dry snow buildup up to 0.2 in. (0.5 cm) on sensor front

Performance

Detection accuracy: large vehicles 98%; all motor vehicles 95%

Percentage of vehicles detected before 400 ft. (121.9 m): large vehicles 95%; all motor vehicles 90%

Range accuracy: ±10 ft. (3 m) for 90% of measurements

Speed accuracy: ±5 mph (8 kph) for 90% of measurements

ETA accuracy: ±1 sec. for 85% of measurements

Maintenance

No cleaning or adjustment necessary

No battery replacement necessary

No recalibration necessary

Mean time between failures: 10 years (estimated based on manufacturing techniques

Support

Training and tech support available

Training includes:

Knowledgeable trainers

Presentation materials

Classroom and in-field instruction

Installation and configuration instruction to ensure accurate performance

Instruction in use of computer and other necessary equipment

Virtual configuration

Technical support includes:

Technical representatives available for installation and configuration

Ongoing troubleshooting and maintenance support

Documentation:

Installation guide

Configuration guide

Quick start guide

Documentation available upon request:

Detection accuracy

Range accuracy

Earliest range of detection

Speed accuracy

ETA accuracy

Warranty

Two-year warranty against material and workmanship defect

(see SmartSensor Warranty datasheet for complete details)

The advertised detection accuracy of the company’s sensors is based on both external and internal testing, as outlined in each product’s specification document. Although our sensors are very accurate by industry standards, like all other sensor manufacturers we cannot guarantee perfection or assure that no errors will ever occur in any particular applications of our technology. Therefore, beyond the express Limited Warranty that accompanies each sensor sold by the company, we oLer no additional representations, warranties, guarantees or remedies to our customers. It is recommended that purchasers and integrators evaluate the accuracy of each sensor to determine the acceptable margin of error for each application within their particular system(s).

Arc6

6-sensor cabinet interface device Part of the Expanse system, the Arc is all about convenience–providing power, surge protection, and communications for up to six sensors. Multiple Arc6 units can be placed on a single Ethernet network so that, through the Expanse software, you can see and configure all the sensors in your system right from your computer.

Puts all connected Expanse or

SmartSensor sensors on your

Ethernet network, letting you access them from any connected computer via Expanse software

SDLC port for communicating with compatible controllers

RS-485 and Ethernet connections for onsite configuration and connection to other cabinet devices

Accepts AC power, and passes that power on to up to six sensors

Protects cabinets from surges on the sensor cable

Arc Surge field-replaceable surge cards let you quickly get the device back in top condition after a surge event

Can be set on a shelf or mounted on a cabinet wall or 19-inch rack

W A

N R

S -4

L A

N S

D L

C

1827 W 650 N, Springville, UT 84663, US " (801) 734-7200 " www.wavetronix.comWX-500-0417

Part No: 102-0594

WX-500-0417

Part No: 102-0594

Physical properties

Weight: 4.9 lbs. (2.2 kg)

Dimensions: 8.72 in. × 3.42 in. × 10.71 in. (22.14 cm × 8.6 cm ×

27.2 cm)

Included components

AC power cable

Ethernet cable

Blank field replaceable surge card cover

Operating conditions

Ambient operating temperature: -29°F to 165°F (-34°C to 74°C)

Humidity: up to 95% RH

Mounting

Shelf-mount

Mounting brackets available for purchase

19-in. rack mount bracket (2U height)

Side-mount strut channel bracket

Top/bottom-mount bracket

Connections

Power and surge

AC input: IEC AC input

Power switch on back of device turns o[ power to device

Arc Surge field-replaceable surge cards protect the device from surges coming in on the sensor cable

Ethernet

2 RJ-45 10/100 jacks on the front of the device for wired

Ethernet communications to other Wavetronix devices, or for onsite configuration

1 RJ-45 10/100 jack on the front of the device for wired

Ethernet communications to customer network

SDLC

1 SDLC port on the front of the device for connecting to

SDLC-compatible controllers

Serial

2 RJ-11 jacks on the front of the device for RS-485 com-munications

Connections to sensor

Six slots on back of device for plugging in field-replace-able surge cards

Field-replaceable surge cards provide a spot for termina-tion of sensor cables, as well as protecting the device from surges on that cable

Power

AC power supply voltage: 100–240 VAC

AC frequency: 50–60 Hz

Max AC current: 6 A

Supports 6 sensors (up to 25 W each)

Configuration

Illuminated indicators show when data is being transmitted and received on the Ethernet, serial, SDLC and sensor ports

±5ppm real-time clock with super capacitor backup

Supports time sychronization from GPS, NTP or real-time clock

Surge protection

AC input surge immunity: IEC/EN 61000-4-5 level 3

Sensor ports surge immunity: IEC/EN 61000-4-5 level 4; must be obtained by purchasing an FRS card (102-0480)

Testing

Tested under FCC CFR 47, part 15, section 15.249

FCC certification on product label

FCC regulation–compliant for life of the sensor

Complies with the applicable standards stated in the NEMA

TS2-2016 Standard

Ordering information

Arc6

102-0594

Optional accessories (sold separately) 102-0564 – Arc Surge

102-0537 – Arc Surge Expanse Link Spring Cage

Connector Kit

102-0562 – SmartSensor Surge Mark II

102-0481 – Blank Cover for Arc Surge

102-0525 – SmartSensor Surge

102-0486 – Arc 19-inch Rack Bracket

102-0485 – Arc NEMA Side-mount Bracket

102-0487 – Arc Diamond Bracket

101-0463 – Expanse Link S Cable 5000’ spool

101-0464 – Expanse Link S Cable 1000’ spool

101-0465 – Expanse Link S Cable 500’ spool

Contact us

801.734.7200 sales@wavetronix.com www.wavetronix.com

Arc6 technical specifications

WX-500-0417

Part No: 102-0594

Passes manufacturer’s test before shipping

Equipment labeling found on the bottom of the unit

Support

Extended support options available; contact a Wavetronix rep-resentative for more inoformation

Comprehensive user guide

Warranty

Five-year warranty against material and workmanship defect

SmartSensor Mount

Pole mount for SmartSensors The SmartSensor mount makes installation quick and easy by helping you securely mount any of the Wavetronix SmartSensors. Sturdily built of powder-coated aluminum for durability and weather-resistance, this mount can withstand whatever the elements throw at it.

Two axes of rotation for horizontal and vertical positioning

Mates with fixed and rotational backplates on the SmartSensor V, HD, Advance, and Matrix

Symmetric hole pattern for flex-ibility in sensor attachment

Two contact points for attachment to circular or non-circular poles

On circular poles, another axis of rotation around the pole is avail-able

Accepts ¾” banding

Heavy duty aluminum construction makes mount sturdy and long-lasting

Powder coated for oxidization resistance, allowing mount to withstand the harshest weather conditions

Supports a 20-lb. (9.1-kg) load

8 in.6 in.

13.61 in.

3.79 in.

78 E 1700 S, Provo, UT 84606, US " (801) 734-7200 " www.wavetronix.comWX-500-0072 1 of 3

Technical specifications

Mounting

Rotational axes: 2

# NOTE: SmartSensor Advance and SmartSensor Matrix are shipped with rotational backplate for third axis of rotation.

SmartSensor V and SmartSensor HD can be ordered with rotational backplate if third axis is required.

Maximum load: 20 lbs. (9.1 kg)

Symmetric hole pattern that mates with fixed and rotational

SmartSensor backplates

Contact points with pole: 2

Slotted for ¾-in. (1.9-cm) banding

Additional degree of movement achieved by using the

360-0129

Construction

Constructed of aluminum 0.1875 in. (0.48 cm) thick

316 stainless steel hardware

Powder coated

Weight: 3 lbs. (1.36 kg)

Ordering information

SmartSensor Mount

SS-611

Accessories 360-0129 – SmartSensor Mount Knuckle

Contact us

801.734.7200 sales@wavetronix.com www.wavetronix.com

Bid specifications

1.0 General. This item shall govern the purchase of a tra_c sensor mounting assembly equivalent to the Wavetronix SmartSensor™ mount.

2.0 Mounting. The mounting assembly shall provide at least two axes of rotation to ensure proper installation.

The mounting assembly shall be able to support at least a 20-lb. (9.1-kg) load.

The mounting assembly shall feature a symmetric hole pattern that mates with fixed and rotational SmartSensor backplates.

The mounting assembly shall have two contact points with the pole.

The mounting assembly shall be slotted for 3/4-in. (1.9-cm) banding.

3.0 Construction. The mounting assembly be constructed of 0.1875 in. (0.48 cm) thick or thicker aluminum with 316 stainless steel hardware.

The mounting assembly shall be powder coated for oxidation resistance.

The mounting assembly shall weigh 3 lbs. (1.36 kg).

Sensor Cable Junction Box

Junction box for splicing cables The sensor cable junction box provides connection between the sensor’s pigtail cable and the homerun cable to the cabinet. This box’s nine terminal blocks eliminate the need to pull a connectorized cable from the sensor to the cabinet. Its small size allows for an in-line connection that will fit in a hand hole.

NEMA type 4, 4x enclosure, providing a degree of protection against falling dirt, windblown dust, water, and ice

Insulation displacement terminal blocks for quick wiring

Small form factor for placement in traIc pole hand hole

Cable grips for water resistance

Same-side cable entry prevents cable path water trails from pooling on cable grip

Nine terminal blocks means that the box can be used with cables with nine or fewer conductors and drains, namely the Wavetronix

SmartSensor 6-conductor cable and the 8-conductor cable

78 E 1700 S, Provo, UT 84606, US " (801) 734-7200 " www.wavetronix.comWX-500-0160 1 of 3

Physical

Dimensions: 6 in. x 3.6 in. x 3.1 in. (15 cm x 9 cm 8 cm)

Cable grip cable diameter: 0.2 in.–0.5 in. (5 mm–12.7 mm)

Designed to meet IP 66 & NEMA 250 type 1, 3R, 4X, 6P, and

12 ratings

Material: fiberglass

316 stainless steel backplate

Connector block

9 terminal blocks

Connections: insulation displacement

Nominal current IN: 17.5 A

Nominal voltage UN: 500 V

Maximum load current: 17.5 A

Wire: 24–16 AWG

Ordering information

Sensor Cable Junction Box

SS-710

Accessories SS-704 – SmartSensor 6-conductor Cable

SS-706 – SmartSensor 8-conductor Cable

SS-B01-0003/0005/0008 – Intersection Preassem-bled Backplate – AC

Contact us

801.734.7200 sales@wavetronix.com

1.0 General. This item shall govern the purchase of a junction box (JB) equivalent to the Wavetronix SmartSensor cable junction box.

2.0 Physical. The JB shall not exceed 6.3 in. x 3.6 in. x 2.4 in. (16 cm x 9 cm x 6 cm) in its dimensions.

The JB’s cable grip shall allow for a cable with a diameter of 0.2 in.–0.5 in. (5 mm–12.7 mm).

The JB shall be designed to meet IP 66 & NEMA 250 type 1, 3R, 4X, 6P, and 12 ratings.

The JB shall be made of fiberglass and include a 316 stainless steel backplate.

3.0 Connector block. The JB shall have nine terminal blocks; these blocks’ connections shall employ insulation displacement technology.

The JB shall have a nominal current of 17.5 A and a nominal voltage of 500 V. Its maximum load current shall be 17.5 A. The JB shall accept wire ranging in size from 24–16 AWG.

SmartSensor 6-conductor Cable

Power and dual–RS-485 sensor cable The SmartSensor 6-conductor cable is used with the SmartSensor Matrix and SmartSensor Advance to provide power and communication connectivity to the sensors. Heavy-duty and weather-resistant, this custom cable is ideal for cable runs from the sensor to the cabinet.

6-conductor cable that attaches to an 8-pin connector

Provides power and RS-485 com-munications between sensor and cabinet

Connector is keyed to ensure proper connection

Color-coded for quick and easy wiring to terminal blocks, Click modules

RS-485 and power conductors are twisted pairs

Cable assembly is shielded with aluminum/mylar shield and a tinned copper drain wire

RoHS compliant

Cable end connector backshell is environmentally sealed, oJering excellent immersion capability

Connector backshell supports ca-ble slack under extreme weather conditions

6-conductor cable 8-pin connector

78 E 1700 S, Provo, UT 84606, US # (801) 734-7200 # www.wavetronix.comWX-500-0074 1 of 3

Cable

RS-485 conductors: 2 twisted pairs

RS-485 conductor nominal capacitance, conductor to conduc-tor: less than 40 pF/ft. at 1 kHz

RS-485 conductor nominal conductor DC resistance: less than

16.7 ohms/1000 ft. (304.8 m) at 20°C

Power conductors: twisted pair with nominal conductor DC resistance of less than 11 ohms/1000 ft. (304.8 m) at 20°C

Cable assembly shielded with aluminum/polyester shield and tinned copper drain wire

Jacket: 0.053-in. (1.3-mm) gray PVC

Cable diameter: 0.41 in. (1.04 cm)

Wire gauges:

$ Power wires: 20 AWG

$ Comms wires: 22 AWG

RoHS compliant

Approvals: UL/cUL Type CMG

Ambient operating temperature: up to 221°F (105°C) dry / 167°F

(75°C) wet

Flammability rating: FT4

UV resistant: Yes (per UL 720 Hour Sunlight Resistance Test)

600 Volt AWM style 2587

Connector

Meets MIL-C-26482 specification

Backshell is environmentally sealed

Backshell oJers excellent immersion capability

All conductors that interface with the connector are encased in a single jacket

Backshell has a strain relief with enough strength to support the cable slack under extreme weather conditions.

Ordering information

SmartSensor 6-conductor Cable (set length, con-nectorized)

SS-704-006 (6-ft. cable)

SS-704-020 (20-ft. cable)

SS-704-040 (40-ft. cable)

SS-704-060 (60-ft. cable)

SS-704-080 (80-ft. cable)

SS-704-100 (100-ft. cable)

SmartSensor 6-conductor Cable (bulk spool, non-connectorized)

SS-705 — custom cable length (sold in 100-ft.

increments)

101-0448 (500-ft./152.4-m spool)

SS-705-001 (1000-ft./304.8-m spool)

SS-705-002 (5000-ft./1524-m spool)

8-pin Female Connector

SS-709

Contact us

801.734.7200 sales@wavetronix.com

1.0 General. This item shall govern the purchase of a tracc sensor–to–tracc cabinet cable equivalent to the Wavetronix SmartSensor

6-conductor cable.

2.0 Cable. The cable shall be the Orion Wire Combo-2204-2002-PVCGY or an equivalent cable that conforms to the following specifications:

• The RS-485 conductors shall be 2 twisted pairs.

• The RS-485 conductors shall have nominal capacitance conductor to conductor of less than 40 pF/ft. at 1 kHz.

• The RS-485 conductors shall have nominal conductor DC resistance of less than 16.7 ohms/1000 ft. at 20°C.

• The power conductors shall be a twisted pair.

• The power conductors shall have nominal conductor DC resistance of less than 11 ohms/1000 ft. at 20°C.

• The entire cable shall be shielded with an aluminum/polyester shield with a drain wire.

• The cable jacket shall be made of gray PVC that is 0.053 in. (1.3 mm) thick.

• The cable shall have a diameter of 0.41 in. (1.04 cm).

• The power wires in the cable shall be 20 AWG; the communications wires shall be 22 AWG.

• The cable shall be RoHS compliant.

• The cable shall have a UL/cUL type CMG safety approval.

• The cable shall be capable of operating at temperatures up to 221°F (105°C) while dry and 167°F (75°C) while wet.

• The cable shall have an FT4 flammability rating.

• The cable shall be UV resistant, as per the UL 720 Hour Sunlight Resistance Test.

• The cable shall support 600 Volts per AWM style 2587.

3.0 Connector. The cable end connector shall meet the MIL-C-26482 specification and shall be designed to interface with the appropri-ate MIL-C-26482 connector. The connector backshell shall be an environmentally sealed shell that oJers excellent immersion capability.

All conductors that interface with the connector shall be encased in a single jacket, and the outer diameter of this jacket shall be within the backshell’s cable O.D. range to ensure proper sealing. The backshell shall have a strain relief with enough strength to support the cable slack under extreme weather conditions. Recommended connectors are Cannon’s KPT series, and recommended backshells are Glenair

Series 37 cable sealing backshells.

SmartSensor Warranty

SmartSensor standard limited warranty Every SmartSensor product that is purchased comes with the Wavetronix standard limited warranty, which warrants that products will be free from defects and fully functional for the first two years. For an extra measure of security, the extended warranty is available, extending protection for up to three more.

Standard warranty:

" For two years, product materials and workmanship are warranted to be free from defect; they will also function properly under normal use

" If a product fails or has a defect not caused by misuse and neglect, or an act of God, it can be returned and Wavetronix will repair or replace the product

Extended limited warranty is available for purchase:

" Available for purchase in one-year increments up to a three-year maximum

" Incorporates, extends, and adds to the coverage described in the standard warranty

78 E 1700 S, Provo, UT 84606, US # (801) 734-7200 # www.wavetronix.comWX-500-0081 1 of 3

Specifications

Wavetronix sensor standard limited warranty

All SmartSensor Products manufactured and sold by

Wavetronix LLC (“Wavetronix”) and paid for in full by the

Purchaser through Wavetronix-sponsored channels are backed by the following limited warranty:

1. For the benefit of the original Purchaser only, Wavetronix warrants that all new SmartSensor products manufactured by Wavetronix shall for a period of two (2) years from the date the Product is shipped to Purchaser (the “Warranty

Period”) (a) be free from defects in the materials and work-manship and (b) conform to and function in accordance with Wavetronix’ written specifications under normal use, subject to the conditions and exceptions set forth below.

If any Wavetronix SmartSensor Product fails to conform to this Standard Limited Warranty, as further explained below, Wavetronix shall, in its sole discretion, and as Purchaser’s sole remedy for any breach of this limited warranty, either repair or replace such substandard Product free of charge, except as noted below.

2. Purchaser shall promptly notify Wavetronix, or the authorized Wavetronix representative, in writing of the

Product’s defect or failure no later than the last day of the

Warranty Period. Upon delivery of such notice, Purchaser shall obtain a return authorization from Wavetronix, and

Purchaser shall then ship the Product to Wavetronix at the address indicated on the return authorization. The Pur-chaser is responsible for all costs of shipping Product(s) back to Wavetronix. Wavetronix shall be responsible for all costs of shipping Product(s) back to the Purchaser.

Product(s) will be shipped to the Purchaser using the same method (ground, next day air, etc.) that was used by the

Purchaser in shipping the Product(s) to Wavetronix.

3. For any returned Product which, upon Wavetronix’ evalu-ation, reveals significant (i.e., neither trivial nor superficial) defects or failure that were not caused by any accident, misuse, neglect, alteration, improper installation, repair or testing by Purchaser or any third party or by any act of

God, and which occurred under normal use and service by the Purchaser, within two (2) years following shipment, the

Product will be repaired or replaced free of charge, except for any non-warranty items such as cabling, connectors, mounts or interfaces that are normally repaired or replaced during standard scheduled maintenance, which items shall be subject to a prorated charge based upon Wavetronix’ estimate of the percentage of normal service life realized from such replaced part. Wavetronix shall not be respon-sible for any data loss incurred prior to or during its replace-ment or repair of any Wavetronix SmartSensor Product.

Wavetronix reserves the right to send the Purchaser fully tested, refurbished Wavetronix SmartSensor Product(s) in the event of any total or partial failure of the Wavetronix

SmartSensor Product(s) previously sold to the Purchaser.

Only authorized Wavetronix technicians may perform war-ranty work. Any work on Wavetronix Product(s) outside Wa-vetronix automatically voids this Standard Limited Warranty.

4. THIS LIMITED WARRANTY IS GRANTED BY COMPANY

TO THE PRODUCT PURCHASER, AND ACCEPTED BY THE

PURCHASER, IN LIEU OF ANY AND ALL OTHER WAR-

RANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN OR

STATUTORY, INCLUDING WITHOUT LIMITATION THE

EXCLUDED IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. WAVETRO-

NIX EXPRESSLY DISCLAIMS ANY WARRANTY THAT THE

OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED

OR ERROR-FREE. WAVETRONIX NEITHER GRANTS NOR

ASSUMES, NOR AUTHORIZES ANY OTHER PERSON TO

GRANT OR ASSUME, ANY OTHER WARRANTIES OR LI-

ABILITIES IN CONNECTION WITH THE SALE OR USE OF

ANY WAVETRONIX PRODUCT. THE FORGOING LIMITED

WARRANTY IS LIMITED TO MANUFACTURING DEFECTS

THAT EXIST WITHIN THE PRODUCT AT THE TIME THE

PRODUCT IS TRANSFERRED FROM WAVETRONIX. THE

FOREGOING LIMITED WARRANTY EXPRESSLY EXCLUDES

ALL INDIRECT, INCIDENTAL, CONSEQUENTIAL, AND PUNI-

TIVE DAMAGES AND ANY EXPENSES RELATED TO ANY

PARTIAL OR COMPLETE INOPERABILITY OF THE PROD-

UCT THAT MAY ARISE AS A RESULT OF SUCH DEFECTS,

OR FOR ANY OTHER REASON, EVEN IF WAVETRONIX

AND/OR PURCHASER ARE AWARE OF THE POSSIBILITY

THEREOF. THE LIMITED WARRANTY SHALL NOT APPLY

IF THE PRODUCT (A) HAS BEEN ALTERED OR ABUSED IN

ANY WAY BY PURCHASER OR ANY THIRD PARTY, (B) HAS

NOT BEEN PROPERLY INSTALLED, OPERATED, REPAIRED,

SERVICED, OR MAINTAINED IN ACCORDANCE WITH

WAVETRONIX’S INSTRUCTIONS, POLICIES, AND PROCE-

DURES, (C) HAS BEEN SUBJECTED TO ABNORMAL PHYSI-

Ordering information

Contact your Wavetronix representative for ordering and pricing information

Contact us

801.734.7200 sales@wavetronix.com

CAL, ELECTRICAL, OR ENVIRONMENTAL STRESS (SUCH

AS SURGES), OR ANY MISUSE, WILLFUL ABUSE, NEG-

LIGENCE, ACCIDENT, OR ACT OF GOD; OR (D) IS SOLD

OR LICENSED FOR BETA-EVALUATION, TESTING, OR

DEMONSTRATION PURPOSES FOR WHICH WAVETRONIX

DOES NOT RECEIVE PAYMENT OF A PURCHASE PRICE OR

LICENSE FEE.

5. Wavetronix makes no warranty with respect to any equipment, parts, accessories, or components (a) manufac-tured or sold by others or (b) the subject of any alterations, repairs, or other services provided by others. The only war-ranties that may apply to such items shall be the warranties ojered by such third parties, if any.

6. Wavetronix reserves the right, without assuming any duty, to review the Purchaser’s installation design in order to ensure performance maximization and protection from environmental or other risks. If Wavetronix surge suppres-sion units are rejected by the Purchaser for use on the Pur-chaser’s system, this Warranty shall be null and void for the particular Product(s) that would have been served by such surge suppression units. The product must be installed according to the installation instructions in the user manual.

If the instructions have not been followed, and problems arise, this warranty will be null and void.

Warranty addendum – extended limited warranty

Wavetronix is pleased to ojer an extended warranty purchase program for those Purchasers who would like an extra measure of security for their purchased Wavetronix

SmartSensors. The following Wavetronix Extended Limited

Warranty is ojered to our Purchasers subject to the follow-ing terms and conditions:

1. This Extended Limited Warranty incorporates, extends, and adds to Wavetronix’s Standard Limited Warranty for the purchased SmartSensor product(s), subject to the following additional terms and conditions. In the event of any contradiction or ambiguity between this Extended

Limited Warranty and the Standard Limited Warranty, the language of this Extended Limited Warranty shall govern.

(Please read the original Standard Limited Warranty and this Extended Limited Warranty before signing the Ex-tended Warranty Purchase Application, which Application specifies the particular product(s), applicable price(s) and extended warranty period(s), and which Application incor-porates and is incorporated into this Warranty Addendum-

Extended Limited Warranty.)

2. The Extended Limited Warranty must be purchased at the point of the original sale. All product serial numbers must be listed in the Extended Warranty Purchase Applica-tion. Any SmartSensor on which the serial number has been defaced, modified, or removed will not be covered under the Extended Limited Warranty.

3. The Extended Limited Warranty does not cover any product conditions, damage, defects, or failures that exist prior to the purchase of the Extended Limited Warranty.

4. The Extended Limited Warranty may be purchased in one

(1) year increments, up to a five (5) year maximum (including the original manufacturer’s warranty. (Any longer period will need to be evaluated by Wavetronix, in its sole discretion, because the product(s) could be discontinued and Wavetro-nix may no longer carry them in stock. If the demand for such extended warranties justifies the purchase, Wavetro-nix may consider stocking sensors and continuing repairs beyond the 5-year maximum.)

5. Any Extended Limited Warranty must be purchased for the full contract (i.e., for all Wavetronix SmartSensor products previously purchased by the customer under the particular contract or purchase order).

6. Pricing of Extended Limited Warranties is subject to change without notice.

7. The Extended Limited Warranty shall cover only such material failure of the SmartSensor product(s) or such signifi-cant defects in Wavetronix’s materials and/or workmanship as are specified in its Standard Limited Warranty, and only for the applicable extended warranty period. Wavetronix’ sole responsibility and liability under the Extended Limited

Warranty shall be to repair or replace, in Wavetronix’ sole discretion, the product(s) entitled to such warranty service, as outlined in its Standard Limited Warranty.

Refurbished sensor warranty

Wavetronix may ojer for sale refurbished sensors. A refur-bished sensor is one that is brought to a near-new condition.

When refurbished, the sensor enclosure will be replaced and may receive a new backplate, connector, and any hardware that shows excessive wear. Each refurbished sensor is fully tested and clearly marked as refurbished. Only sensors that are less than two (2) years old may be considered for the refurbishing process. Each refurbished unit includes a 90-day warranty. The terms of this warranty are listed in the Wavetro-nix Sensor Standard Limited Warranty document, with the exception that a refurbished sensor carries a 90-day war-ranty instead of two (2) years.